Check out my Merchandise Store Below the video for Men's and Women's Apparel, MUGS and Stickers! https://rainmanraysrepairs.myspreadshop.com/
Must have for any toolbox! Gearwrench hose clamp pliers! Click here. https://amzn.to/32lQAJd
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs

50 thoughts on “Angry over price $100 rip off? customer states: costs too much! ford f250 f350 7.3 powerstroke”
  1. Avataaar/Circle Created with python_avatars gilbert Eugene says:

    I have never understood why shops rip diesel owners off. The labor cost is no different. I changed the oil in my in my ram 12quarts of premium oil and a premium filter for around 55 dollars 6/2/22. I don’t feel like materials cost justifies the triple cost of an oil change but places around my area are charging the same as you . The fleet guard filters which I use do recommend you prefill the filter which I do. Most of the oil change places I talk to do not prefill as a matter of time. I personally don’t feel your reasoning for not prefilling maybe isn’t valid because in winter a cold engine will pump unfiltered oil through the engine until the oil reaches operating temp anyway. But just like armpits everyone has their opinion. Thanks for the vid and keep up the good work.

  2. Avataaar/Circle Created with python_avatars JoshuaSamuel says:

    not going to lie… £1.50 per litre is still kinda…. acceptable… like… that's what regular motorway services used to be before everything went up

  3. Avataaar/Circle Created with python_avatars jos says:

    The spinning ratchet effect is angular momentum. When on the armature of the electric motor of the ratchet is spinning. When you let go of the whole tool (including the tiger) the electric brake engages and this transfers the angular momentum of the armature to the stator so the tool spins -until you catch it and the rest of the momentum is transferred to your hand. But there isn't enough force to spin Ray.

  4. Avataaar/Circle Created with python_avatars Lozza says:

    “It rubs the oil on the filter” Haha, nice one Buffalo Bill. 😆

  5. Avataaar/Circle Created with python_avatars D And says:

    U only did half of a diesel service u forgot the fuel filter n air filter not a very good mechanic

  6. Avataaar/Circle Created with python_avatars Robert MacTurk says:

    You mean it’s not the LIO ENIGNE cap?

  7. Avataaar/Circle Created with python_avatars Jerry Perdew says:

    Poke a hole with a screwdriver in the oil filter and let it drain, less likely to drop and splash oil on yourself.

  8. Avataaar/Circle Created with python_avatars Yeeteroni Yeetyeet says:

    So you're supposed to fill the new oil filter with new oil due to it being so big, you don't want the engine to fill that up on it's own, plus it helps the oil circulation more… If I'm wrong please let me know bc that's what I was told

  9. Avataaar/Circle Created with python_avatars steveydent says:

    You have been draining oil incorrectly all your life LOL. Drain the sump, or pan as you chaps across the water say, then crank the engine for 5 to 10 seconds and the oil pump will empty the oil out of the filter into the sump. That way you stay clean. You will see the oil from the sump plug start to drain again. Happy days! Click

  10. Avataaar/Circle Created with python_avatars Randy Stegemann says:

    Are you working as a bartender at night and practicing your long pours by day?

  11. Avataaar/Circle Created with python_avatars 69nites says:

    My vehicle requires rotella t6. If you know anything about current supply, it's about 70 dollars for 5 quarts currently if you can find it.

  12. Avataaar/Circle Created with python_avatars MerlinVI says:

    3 quid a gallon…….its 10 here in uk you lot dont know how lucky you are

  13. Avataaar/Circle Created with python_avatars Gregory Heim says:

    I guess when you put your mouth on a Ford you stay cleaner…?

  14. Avataaar/Circle Created with python_avatars Doug Kyle says:

    Trick for those large filters…punch a hole in the bottom to drain prior to removing…former ford tech

  15. Avataaar/Circle Created with python_avatars rtaepke says:

    Perhaps this has been said in other comments, but if not, before pulling the oil filter, poke a hole in the bottom of it with a tool of choice and drain the oil out. No mess!!

  16. Avataaar/Circle Created with python_avatars Ron Hill says:

    My 95 7.3 takes 16 qts of oil for an oil/filter change, may be part of the reason it's got 500k on the original motor

  17. Avataaar/Circle Created with python_avatars david carter says:

    7.3 takes 15 quarts and a 30.00 filter,jus sayin

  18. Avataaar/Circle Created with python_avatars Kyle R says:

    I had the all mighty 6.0 and the head gasket could not contain its power!!

  19. Avataaar/Circle Created with python_avatars ken menth says:

    😂 Got me‼️

  20. Avataaar/Circle Created with python_avatars Alan Earnest says:

    They put neversieze in diesel oil,that's way it gets everywhere

  21. Avataaar/Circle Created with python_avatars Jerry Walker says:

    I've cold started a freaking steam engine when it was 10 degrees kelvin

  22. Avataaar/Circle Created with python_avatars VB says:

    So, if the oil filler cap must face forward to be correct, then where do I put my filler cap when it has no writing on it?

  23. Avataaar/Circle Created with python_avatars Kim DeHart says:

    Your snap on wrench is nice, is it worth 4 times the price of Milwaukee?

  24. Avataaar/Circle Created with python_avatars Jerry Weninger says:

    drain plug 1 ray 0

  25. Avataaar/Circle Created with python_avatars Tom Bowman says:

    I have a dumb question, why don't you take a hammer and nail and put a hole in the bottom of the oil filter and let it drain out?

  26. Avataaar/Circle Created with python_avatars ZachBraps says:

    $100 for all that?
    Definitely a good price
    15 quarts of Rottela t-5 and a filter was almost $100 on my old 7.3.
    Worst part of changing the oil was NOT spilling the Hot slippery 5lb oil filter

  27. Avataaar/Circle Created with python_avatars Get To The Chase says:

    That's LOW miles for a diesel that old!

  28. Avataaar/Circle Created with python_avatars germr1 says:

    If people don't like the prices they should do it themselves. I would like to do it myself but no space here since I don't like spending even a dollar more if I don't have to.

  29. Avataaar/Circle Created with python_avatars cheekman says:

    I love the subtle south park references! crack me up everytime! "hot hot hot hot hot hot"

  30. Avataaar/Circle Created with python_avatars JesusLovesYou says:

    Great Video

  31. Avataaar/Circle Created with python_avatars KM L says:

    Why not replace with a motorcraft oil filter?

  32. Avataaar/Circle Created with python_avatars Angel Delcourt says:

    Some people should try doing it themselves, buying the supplies, and getting rid of the waste properly so they can understand. Maybe drive a 4 banger.

  33. Avataaar/Circle Created with python_avatars lea says:

    Thats around £90 in uk lmao thats cheap oil around £30, filter £10 plus plug seal

  34. Avataaar/Circle Created with python_avatars squirrelly squirrels says:

    I found a better way get a punch an pop a hole in the filter to drain the oil without a mess

  35. Avataaar/Circle Created with python_avatars E S says:

    It's 50 dollar for an oil change and tire rotation on a gas motor where we are. That's only up to 6 quarts.

  36. Avataaar/Circle Created with python_avatars Mathew Hastings says:

    My mustang holds 10 quarts of oil and I pay over a hundred bucks for a synthetic oil change. 130 dollars for an oil change on a diesel is actually cheap. Go to a ford house and they will charge you almost three hundred dollars to change the oil on a diesel, if it bothers them that much then don’t own a diesel. Diesels are expensive to fix and maintain

  37. Avataaar/Circle Created with python_avatars spacedinvader69 says:

    Auto – tick tick tick tick
    Mechanic – tears vehicle apart down to frame
    (Turns out to be a marble in the ashtray) 😆
    Yeah, fun vid!

  38. Avataaar/Circle Created with python_avatars Steven Moore says:

    Fun fact about the oil filter wrench hes right i did this to my oil filter and it caused a leak so hand clicks only unless using the strap kind then ur ok

  39. Avataaar/Circle Created with python_avatars Jeff Nottellingyou says:

    Get bent Ray! Would live in Canada any day Instead of the states!

  40. Avataaar/Circle Created with python_avatars DAVID VINCENT says:

    think it was bad then try the price today it is May 18, 2022 – you can add about $20 to the first price of $130 – I get it I have 3 diesels in my "fleet" of emergency response (FEMA division known as C.E.R.T. or Community Emergency Response Team we do more than the fire departments we are usually the search and rescue team and always the last one out so Fire and PD can move on to the next emergency) All the same even though I run RAM 3500's that oil (and we run synthetic due to the amount of time our equipment has to idle) A oil change these days is around $150 to $!60 depending if I do it or it is sent in, and you are right the cost is in the OIL.
    And to answer your question of why it cost so much? Because they can charge what they want (think back 35 years to oil company deregulation to receive your answer. I grew up in the age of $00.19 cent gas wars in the 60's and yes premium was expensive then about 37 cents a gallon

  41. Avataaar/Circle Created with python_avatars AntimatePcCustom says:

    to all the metric friends. 12 quarts is around 11,3L damn.

  42. Avataaar/Circle Created with python_avatars Noel Heppard says:

    you turned the OIL cap and now I can't find my 710 cap… and the 6.9 NA and the 7.3 power stroke are two of the best until the 6.7 by FORD…6.4 & 6.0 are junk

  43. Avataaar/Circle Created with python_avatars Richard Green says:

    My local dealer used to have a deal when you bought a new vehicle they provided "lifetime" free oil changes. I got that deal on a couple of vehicles. When I bought my 2006 Dodge Ram 2500 Cummins, I did not expect to get that deal, but surprise they provided it and even documented it. Even at that time a full oil change with filter and 3 gallons of diesel oil was an easy $50 to $60. I put 60K miles on the truck before I sold it to a friend. I got 9 totally free oil changes on a diesel PU. Of course if I had anything else done, I had to pay for that.

  44. Avataaar/Circle Created with python_avatars Will Rottgering says:

    Pro tip for not getting it all over you with the big diesel filters.

    Get a large nail and a hammer
    Punch a small hole in the bottom to drain the filter
    Remove filter without it going everywhere

    Ta da!!

  45. Avataaar/Circle Created with python_avatars Matthew Bird says:

    Yup you got me 😂 love your videos!
    Comment click

  46. Avataaar/Circle Created with python_avatars Maze 275 says:

    Nearly a 100% increase in gas prices in Australia

  47. Avataaar/Circle Created with python_avatars Alexander says:

    At jiffy lube we use the same oil buckets minus that neat tube
    Might come try out Napa

  48. Avataaar/Circle Created with python_avatars Alexander says:

    At jiffy lube that would've costed like 120-160

  49. Avataaar/Circle Created with python_avatars E-Nonymouse says:

    i've been charged 100 bucks for 3-5 quarts of oil and a filter change. I prefer those filters with the nut welded on the end, saves much grief.

  50. Avataaar/Circle Created with python_avatars bernie alvey says:

    I paid $180 for oil & filter change and fuel filter change and I supplied the fuel filter For my 6.0

Leave a Reply to lea Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.