Come along with Eric O. here at the SMA Shop as we swap out this re-man transmission that only lasted 1 day after we installed it! This is a 2005 Chevy Silverado with a 5.3 and it is two wheel drive.
We do run into a little snag though in the end... -Enjoy!
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair

47 thoughts on “Chevy / gmc 2wd truck transmission replacement – part i”
  1. Avataaar/Circle Created with python_avatars Speed Ineed says:

    Junk yard trannie hum. Sitting here trying to figure how this fluid tube has got to be bent. It came out a wrecked truck. That small stuff ya know ? Thanks for the assistance.

  2. Avataaar/Circle Created with python_avatars pinacho1979@gmail.com pinacho says:

    Thanks amigo for all you for people like me ..muchos thanks ..

  3. Avataaar/Circle Created with python_avatars Jay Strock says:

    Rebuilt Advance Auto trans. Asking for trouble!

  4. Avataaar/Circle Created with python_avatars Jay Strock says:

    I would not trust a rebuilt trans as far as I could throw it.

  5. Avataaar/Circle Created with python_avatars Jay Strock says:

    I hate wearing gloves.

  6. Avataaar/Circle Created with python_avatars BraaapAllDay says:

    So when someone wants to put in a used transmission you warranty your labor? I understand maybe get a tranny with a warranty but they should always have to pay the labor on a used part/ parts that they insist on buying.

  7. Avataaar/Circle Created with python_avatars armando nika says:

    Hey Eric if you still use or recall the long extension brand/ length??? Thanks man

  8. Avataaar/Circle Created with python_avatars Tanner Daly says:

    Iโ€™m about to buy the 5.7 litre 2wd and Iโ€™m wondering is the 2wd auto transmission really bad ?

  9. Avataaar/Circle Created with python_avatars Alan Call says:

    I wish you were closer to my area I would put you to work Love the content keep it coming

  10. Avataaar/Circle Created with python_avatars cruelonegreen says:

    Hate when Iโ€™m in the middle of working on something and the phone starts ringing lol

  11. Avataaar/Circle Created with python_avatars Irepair of Pc /31 family kart racing says:

    Need to glue a magnet on that light.

  12. Avataaar/Circle Created with python_avatars pughconsulting says:

    Mine lasted 48,000 miles and grenaded while cruising at 70mph with the cruise set on a 3 hour drive. Dealer put another one in and that one has been good ever since. First one must have been built on a Friday.

  13. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Theres always Something that Doesn't Fit On remanufactured item 99 percent of the time it's always A Fitting Or a Threaded Line I feel you're aggravation Eric O @SouthMainAutoRepairLLC

  14. Avataaar/Circle Created with python_avatars Kevin Hogah says:

    What I want to know is why people waste their money on GM crap.

  15. Avataaar/Circle Created with python_avatars Av8tore71 says:

    Aluminum & steel corrosion is called galvanicย corrosion

  16. Avataaar/Circle Created with python_avatars Av8tore71 says:

    Dorman must make those gloves!!

  17. Avataaar/Circle Created with python_avatars William Mason says:

    I use jaspers trans. And motors

  18. Avataaar/Circle Created with python_avatars Thad Machia says:

    Wow mechanics have issues we wouldnโ€™t know unless we seen it. I can imagine jobs being difficult enough without having to deal with differences in known parts. Still a great job explaining thank you!

  19. Avataaar/Circle Created with python_avatars Manolo Aviles says:

    blessings my name is Manolo I would like to know how to reset the automatic transmission module with scanner of a Chevy express 3500 4.8 2013 thanks

  20. Avataaar/Circle Created with python_avatars Levi Mellen says:

    How would I remove just the extension housing? The yoke broke off where the bushing is so there's no play. I've hit it a few times but don't want to damage the shaft

  21. Avataaar/Circle Created with python_avatars Joe Eiken says:

    Looks like you need a magnet like

  22. Avataaar/Circle Created with python_avatars K Kafu says:

    I love the step-by-step style of your videos, great job and patience. I felt that statement near the end of the video when you said, โ€œitโ€™s always something!โ€

  23. Avataaar/Circle Created with python_avatars Jerome Parker says:

    Will a automatic transmission out of a 04 Yukon XL the same thing that is in a 06 Chevy Silverado

  24. Avataaar/Circle Created with python_avatars Matthew Anderson says:

    Got a reman 4l60e trans they left a lot stuff off the trans like the yoke sleeve that goes on the output shaft and Little odds and ends

  25. Avataaar/Circle Created with python_avatars Ricardo Arias says:

    I have a 98 chevy cheyenne would it be the same process

  26. Avataaar/Circle Created with python_avatars Al Whitesell says:

    We use the harbor freight, black gloves at work and they hold up very well.

  27. Avataaar/Circle Created with python_avatars Anthony Shakibanasab says:

    How much do you typically charge for a job like this?

  28. Avataaar/Circle Created with python_avatars Tommy Gregorcyk says:

    Had same light same problems. Also always blinding me.

  29. Avataaar/Circle Created with python_avatars Daniel Holtzapple says:

    The tranny your pulling isn't the original. Someone swapped it before and its already gone bad again. I was looking at Silverados because they are supposed to be better trucks. Im not a Ford chevy or dodge guy. They all have problems.

  30. Avataaar/Circle Created with python_avatars Daniel Walsh says:

    I wood just to rid of it

  31. Avataaar/Circle Created with python_avatars Celts4Life207 says:

    Damn that frame is swiss cheese and the exhaust has seen better days. Surprised they put a reman in it

  32. Avataaar/Circle Created with python_avatars NotMe says:

    Thank you very much for what you do and taking the time to share. It's alot of extra work to do these videos.

  33. Avataaar/Circle Created with python_avatars Viking 2121 says:

    I love older GM's, but yeah I did a trans on a 07 and ran into the same issue, There are a few different 4l60e's I think it has to do with the external trans cooler, some of the trucks had an separate trans cooler whole others are built into the trans, idk why they would change connectors for one or the other, but hey, GM…. lol

  34. Avataaar/Circle Created with python_avatars Donald Ellett says:

    You never know what will go wrong or what parts will be wrong – that's life as a mechanic

  35. Avataaar/Circle Created with python_avatars Beepee Fromabove says:

    Harbor Freight's 5000 Lumen, 4 ft. LED light is $20, and the very best work light ever. Attach a couple of globe light style spring clips to the housing. Very versatile.

  36. Avataaar/Circle Created with python_avatars MoparDan says:

    Eric, I wonder if a light that you could mount on a headband would work better, much like what miners use, just a suggestion.

  37. Avataaar/Circle Created with python_avatars Nick Villa says:

    Hey so I have a question I canโ€™t seem to find a answer so maybe you can help me. Is there a different transmission outside of the 4L60E that will bolt up to the 5.3l vortec. Just trying to find one that is more reliable

  38. Avataaar/Circle Created with python_avatars Eric Beard says:

    I had 4×4 99 dodge dakota.

    We akig clicking noise I changed alo o suff the bought it to "pro". He saidhe fixe it.. nopr… the he switch transfer case.. then in wa rebalance shaft.. then u joints..

    Ifiwantetdto play caneoarts and gues id done it myself.

    I redid rear bearings and rear end for first time I ever did and problem gone.

    Point is I you've few tools andyouub your smarter the so called pro

    The beauty of the4x4 is the u joints he changed that wee fine broke… so o the highway I took driveshaft off, put bagwith sock over hole to not lose fluid popped it ifwd knowing only fronts would spin and drove miles to GAS Station ..

    Dodge with back speed sensor in rear diff will have every light on your cluster on its odd

  39. Avataaar/Circle Created with python_avatars sidney meyer says:

    I'm curious! What does it cost today for any mechanic to replace a rear main seal on a 02 chevy 2500hd 4×4? Just throw me a number, Thanks…….

  40. Avataaar/Circle Created with python_avatars sidney meyer says:

    When can I bring you my truck, I need a new rear main seal its leaking oil! Help……

  41. Avataaar/Circle Created with python_avatars 8gomerpyle22 says:

    Dude you need to switch to EVs. You're too good for this rusted old ICE crap! Get rid of the exhaust pipe, the manifold, the catalytic converter and the transmission. All you need to fix is the air conditioner, power steering and brakes. Easy peasy.

  42. Avataaar/Circle Created with python_avatars jerry c says:

    Geez, Mr. O., it looks like for nut you break 2 pounds of rust comes down.

  43. Avataaar/Circle Created with python_avatars greg bennett says:

    That sucks when that happens

  44. Avataaar/Circle Created with python_avatars Screwdriver Kelly says:

    I just finished the rear main seal, crankshaft sensor and oil pan shield. It was hard AF. I mean the mechanic almost had to use a pry bar to get the 550 out of my hand.

  45. Avataaar/Circle Created with python_avatars Bryan Rose says:

    I feel ya! I hate that crap too!

  46. Avataaar/Circle Created with python_avatars Scott Farris says:

    Glad Iโ€™m not the only one with the lights. ๐Ÿ˜‚

  47. Avataaar/Circle Created with python_avatars Scott Farris says:

    Holy thunder, Eric is wearing gloves!!!!!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.