You want, now you got it! Come along on this multi part series as Eric O. and the team at SMA replace a blown engine in this Chevrolet 1500 4x4 with a 5.3 V-8.
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the **ALL NEW** SMA A-Store and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

49 thoughts on “Chevy truck engine – remove replace part ii”
  1. Avataaar/Circle Created with python_avatars gary maya says:

    Why not just the intake, heads from the block first the remove it… seems like that could have help a lot.

  2. Avataaar/Circle Created with python_avatars dntlss says:

    Great video, one of these few if any videos i found where they left the tranny in which is what i need,i understand getting the little puny 5 speeds out with the motor but one has to be a masochist to pulls a big ole auto with a engine,just leave that sucker in there.

    Everyone has their own style of doing this but when i do it, i strip that engine (unless I'm selling it) thats coming out bare,the less stuff on it the better and easier it comes out,great video again man, thanks for putting it together!!

  3. Avataaar/Circle Created with python_avatars Daddyoh says:

    Next time have one of the subscribers on the phone live to give you directions.

  4. Avataaar/Circle Created with python_avatars Daddyoh says:

    Scotty Kilmer, You don't need a cherry picker. Lift it out with your hands.

  5. Avataaar/Circle Created with python_avatars Louis Harris says:

    When I remove a Chevrolet truck motor I always remove the intake and water pump first. It makes the process easier, plus with the intake removed you get access to the upper bellhousing bolts

  6. Avataaar/Circle Created with python_avatars Sam Cambron says:

    MIKE ROWE ….. Safety Third

  7. Avataaar/Circle Created with python_avatars mark vietti says:

    I was expecting the screen to go black after you said.. (thing smells like gas)

  8. Avataaar/Circle Created with python_avatars George B. Pfaff says:

    glad you didn't have con rod sticking through the oil pan. tranny stick… its tricky. YOU KNOW…Patients

  9. Avataaar/Circle Created with python_avatars George B. Pfaff says:

    tool monkeys are nice. had one for 2 summers…. came back 3yr later, turns out he did not LEARN A thing… hate that for em.

  10. Avataaar/Circle Created with python_avatars Thrasher Austin says:

    I know this video was posted 5 years ago. But my engine blew the drivers side valve cover gasket while going 70 down the high way. Was already burning oil for two years. Tried to start it while in the side of high to get the the exit but the starter just made terrible grinding noise. And then after a tow to my house. I tried to spin the front crank and no luck. So im assuming its siezed. I already needed to replace the trans due to no reverse. Can you still take the engine off with out taking the torque converter off. And if not can you take the trans with the engine through the hood. Also what would an average cost for your two swap engines if the customer provides the engine and trans?

  11. Avataaar/Circle Created with python_avatars Andiar Rohnds says:

    shouldnt you lighten the load off the engine by jacking it up a bit before zipping off the mount bolts? or did you already do that?

  12. Avataaar/Circle Created with python_avatars deVille NM says:

    There's a reason that us mechanics cost so much. Im doing this exact same swap right now. But on a 2wd truck.

  13. Avataaar/Circle Created with python_avatars Ramiro Pineda says:

    No idea what your doing LOL

  14. Avataaar/Circle Created with python_avatars Matt Hurley says:

    South Main Auto is about to go rated R…🤣🤣

    We’ve all been there a few times…😎

  15. Avataaar/Circle Created with python_avatars Jeff Brown says:

    Normally I leave traces of blood on all the engines I've pulled. Gloves must help a lot! Great video of what a terrific pain in the butt this job is and these are far from the worst to pull!

  16. Avataaar/Circle Created with python_avatars I. M. Hipp says:

    After living in Vegas for the past 35 years I sure don't miss the rust the rest of the country has to put up with. When I was a boy in Omaha I can remember my Dad having to sell his 57 Ford two door wagon because of the rust holes in the quarters and front fenders. The car was only five tears old and ran like new., but he could only get $100 for it. When I lived in Vancouver my heart was broken when I watched the body on my TR3 disappear in front of my very eyes from the rust over the winter . My Karmann Ghia fared even worse. My Chevy truck I have now is 20 years old and the underside looks like new. No rust on the frame, exhaust, brakes etc. On the other hand working outside in the summertime sun leaves something to be desired, but for a few hundred a swamp cooler can be installed in your garage and the nights are really nice.

  17. Avataaar/Circle Created with python_avatars Ken Barnes says:

    I do motor and tranny swaps all day for a living been doing it for over 40 years those easy to do in a day

  18. Avataaar/Circle Created with python_avatars Dependable Auto Truck says:

    i also installed a harbor freight 2500lb atv winch on my cherry picker makes life so much easier has wireless remote so so nice. and the trans tube clears

  19. Avataaar/Circle Created with python_avatars Dependable Auto Truck says:

    i remove coil packs and intake and mount my plate to the valley plate under intake to pull out

  20. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    That bell housing was a fight to the end 😳 @SouthMainAutoRepairLLC

  21. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    21st Century Attention Spans only apply to 21 Century kiddos Eric O comment from part 1 US Old Timers Love the longer Videos More entertaining and Informative and Fun to watch okay Sunny these young whipper snappers now days Lmfao 🤣🤣 @SouthMainAutoRepairLLC

  22. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Lmfao Hannah grabs the camera and You grab the fire extinguisher and you both scream that's a good plan There Eric O 🤣 @SouthMainAutoRepairLLC

  23. Avataaar/Circle Created with python_avatars Jeb common says:

    The truck owners philosophy is, why change the oil every few thousand miles for $30.00 , when you can swap the engine for a few thousand dollars or so.

  24. Avataaar/Circle Created with python_avatars Johnny Sechrist says:

    Hannah knows how to avoid those PC questions…good job Hannah.

  25. Avataaar/Circle Created with python_avatars Sherman Kearns says:

    Most torque converter seals 🦭 leaks are caused by the mechanic dropping it on the spine as it come s out either from the junkyard or in the shop when the converter is full of fluid I bang my head on the wall watching so called mechanics drop the converter on the cam as they spin it off 1….2…..3….. clicks. Drop and gouge and leak FML LOLOLOLOL

  26. Avataaar/Circle Created with python_avatars James Hiers says:

    I can tell you haven't pulled alot of those particular engines before ,but that still don't change the fact that your one of the best mechanics on youtube

  27. Avataaar/Circle Created with python_avatars Todd Conklin says:

    First step is to remove all wire's and hose's then you have nothing in the way

  28. Avataaar/Circle Created with python_avatars Todd Conklin says:

    It's worth it to take the extra time to remove the transfer case

  29. Avataaar/Circle Created with python_avatars Todd Conklin says:

    Must say…. your pretty brave….. using air on the starter selonoid

  30. Avataaar/Circle Created with python_avatars Diego Dominguez says:

    It will be easier to remove the radiator support in the front and remove intake manifold more rooms .I had broken the map sensor

  31. Avataaar/Circle Created with python_avatars Dwane Montgomery says:

    Way to go! I like that you show the struggle is real for us laymen. Not editing out the parts that make you look or feel like an idiot, shows the truth, lol.

  32. Avataaar/Circle Created with python_avatars Timothy Conner says:

    Why didn’t you just call the front end off. Radiator condenser core support headlights running lights grill trim pieces and that motor comes right out. Seems like you’ve wasted a lot of time screwing around taking other stuff off where you could’ve had all that off in 30 minutes probably. Just a suggestion.

  33. Avataaar/Circle Created with python_avatars Justin Case says:

    If it needs another engine (and/or/probably a tranny), the thing is baked (abused/neglected). Nope, won’t do it …

  34. Avataaar/Circle Created with python_avatars Justin Case says:

    .

  35. Avataaar/Circle Created with python_avatars Justin Case says:

    IMHO, if it needs a new (another) engine (and/or/probably) a tranny, the thing is baked .. Nope, I won’t do it …

  36. Avataaar/Circle Created with python_avatars Justin Case says:

    When a woman says “nothin” .. my answer “No comprende, not in my vocabulary” …

  37. Avataaar/Circle Created with python_avatars Eric W says:

    BINGO WAS HIS NAME-O AMEN, HALLELUIER! 😆

  38. Avataaar/Circle Created with python_avatars James Dvorak says:

    Good job Hannah! Nice work!

  39. Avataaar/Circle Created with python_avatars Paul C Townsend says:

    Goode job.

  40. Avataaar/Circle Created with python_avatars tj lee says:

    i love to see a good man doing his job and making it look much easier than it is .

  41. Avataaar/Circle Created with python_avatars Ben Burg says:

    Jack trans up, get upper bell bolts from top

  42. Avataaar/Circle Created with python_avatars Hola! Larry Luckinbill says:

    Awesome video, My hands got a little greasy and my knuckles are bleeding just from sitting here in front of my computer watching! I would like to send you a little money for the education I just got, do I use the address above?

  43. Avataaar/Circle Created with python_avatars Gabby Gracia says:

    "WHY DIDNT YOU GUYS SAY SOMETHING ?!?!" had me on the ground lol

  44. Avataaar/Circle Created with python_avatars VideoNash says:

    thanks

  45. Avataaar/Circle Created with python_avatars Robert Cook says:

    How many bell houseing bolt are in this transmission

  46. Avataaar/Circle Created with python_avatars walking with dogs says:

    These days unless i know the engine is going to come out easy from the top. Ill just drop them from the bottom just like they was put in, less time and messing around.

  47. Avataaar/Circle Created with python_avatars 521farmer says:

    Just Wonderin with Nice shop like ya Got why don't ya hav more tools and special tools for more jobs Cause when had My Shop Went all the way the best 87 thousand dollar hoist to lift all trucks up to 5 ton was not missin a Job 2 mecs Had papers we did it all from garden tractors to Grain trucks semi's if it was not for Covid Still be Goin Nasty Stuff People Gave up around here SAd World My Friend So Hopfully ya Making it Still ?lov what ya Doin cause got to be By the Job Keep it up Ya Got this

  48. Avataaar/Circle Created with python_avatars mike marshall says:

    Top bolt out?

  49. Avataaar/Circle Created with python_avatars Rob says:

    This the reality of this! great job bud!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.