In this video I have a look at a customers Hyundai Tucson that has a customer complaint of no blower motor and some clunking/rattle noises when driving? Let's have a look!
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
Foreign. Look at this. Hyundai it's the Tucson a customer complaint of no blower motor most of the time. at least that's what misses.
Overall Down: oh it looks like we've got a note on the seat baby. It is a note but it's not for us. Uh so no blower motor so let's just go key on. Indeed we have no blower motor so that's good.
No high, No. nothing sounds like the mode doors are working. Yeah I can hear them moving around so that's good. And what's the other thing? Miss So says that he has a rattle so we're gonna take a free little shake down here.
see what we got? I don't know if we're talking like sway bar link rattle or if we're talking like heat shield rattle I did not get them in particulars. let's go around the corner here and wax. Railroad the back out of there weird over the railroad tracks feels real wishy-washy in the bathroom and give her some side. Wiggles it's like you turned on the back end catches up with you.
look at that was struck back there rattling. possibly kind of what it sounds like to me. So I wouldn't be surprised to see like the I'm gonna take a turn the key on folks. Uh, blower motor is on high I Grabbed us a test light before we do anything.
Let's just back probe this little guy. It's pretty easy to see there in there. Oh look at that. We've got a nice bright light so what's that? Tell us it tells us a lot that's off low.
Next one up, next one up, super bright burning my retinas. so let's give it the old. Fonzarelli Everybody knows fines, huh? Hey I said a a that's not working today, but we know we just simply need a blower motor because we're lighting a 5 amp test later 4 amp test light. so needs a new blower motor.
uh, maybe seats up or something there or open circuited more than likely. So anywho, there's your problem lady. Shield I Didn't even hear that sucker on the test drive oddly enough. And then looking in the back, uh, it does not have struts.
It's an inch classic shock spring setup here. and it's also your classic just rotted out. New York Car: It does have a bad sway bar link. Maybe you can hear that rattling.
so that's probably what we were hearing rattling that sounded like a bad strut. Um, in the Prny, you've got to be a little a little bit lenient on what you're looking at and not lenient in as far as safety aspect. but you know a lot of you guys that are outside of the New York or the salt belt. We'll look at this be like this whole thing's shot.
Well, you're 100 I Mean this is a 08 so it's going to be hitting the crusher here probably in the next year or so. Um, but when we look at suspension bushings and stuff, yeah, they're all going to look dry and crusty and weather cracked and you just kind of got to close your eyes a little bit if they're still attached. Well, that's what it is because this looks just like any other 2016 or 2018 you'd pull in too. I think I was just telling you guys, it's 2008 to 2014 so it's not a no. wait, it's a 14. either way I guess everything we said is still the same and I know that sounds a little bit ridiculous. and I'm not saying I'm going to overlook, you know, blatantly obvious safety items. but you know, let's tell a customer.
Let's say we told them like, well, all your bushings had some, you know, checking in them and you need all new bushings. Well, at that point the car is totaled and that's even if it's a, you know, say, a two-year-old car in. New York You know they're junk, they're rotted, and you know you're not moving these cam bolts. you're not getting the bolts out of.
You know any of the suspension components. So if you say Hey Joe customer, you need this five dollar bushing. What's going to cost? you know, five thousand dollars because you're going to need a subframe and every bolt that attaches to it. It's just the fact of life, so you kind of have to use your best judgment when when looking at stuff and which battles to pick.
But obviously if one of the bushings is completely ripped out in the arms, you know, banging around, then well, you have no choice. And unfortunately again, it keeps saying that that's what condemns some of these cars in. New York State rust. I Mean that's what ultimately gets them in the end.
Uh, this liquid calcium chloride or magnesium chloride? whatever it is they put on the road I Mean it spanks these cars. You guys seen that video I Did not until I'm going at 2019 Chevrolet I Mean it's rotted. It's just. you know it's three years old, but about 10 years is usually about limit.
most things over 10 years old. Well, you're pushing your luck. They're getting pretty smoked at that point. Crown Fluid film.
Uh, you know. New Hampshire Oil coding Rust Check Whatever one you use, Use it. You'll get twice the life. You get 20 years out of your car instead of 10.
So think about that. For a while, somebody's already played the big washer game with this thing. You're completely rusted out, the bolts won't. Uh, well, they might come out.
We usually what we do on these kind of heat shields. When they come in, we take the factory nuts off. we put a fender washer on there, but somebody's already done that obviously a while ago. So um, you know you can reattach it with some rivets or you just take it off, throw it in the trash.
but we can't play that on. YouTube Because people would go crazy. This thing fell off on. the road.
Nobody. Think nothing of it, but can you imagine if some rack job YouTube mechanic took it off and threw it in the trash in front of everybody in the world. Foreign heat shield as opposed to letting it fall off? you know I'm drilling into the frame structure. make sure where you're poking a hole, don't go just jamming holes willy-nilly And then I'm using using them Rivets, so it should last a little bit longer.
Some time has passed, but we did get customer approval a little bit later in the day now. Had to pull the car outside waiting for him to call back, see if we can't unhook this. probably should unhook this earlier to see if it's all burned up here. It probably is. It looks like it is. Yeah, it looks like the resistance has gotten to it. The connectors all melted in here. Thought about that after we checked it out.
However, we know we have good power and ground. But yeah, she's pretty cooked inside that terminal. It's terminal fella. Looks like she's cooked inside There we're gonna take and we're gonna cut this plug right.
Clean off. Not uncommon to see this. We'll cut it off. We have an aftermarket motor so we will just cut the terminal off from it also.
Yeah, this one's been definitely has been super hot. You can see the wires all cooked there. Uh, what do we need Phillip Said it looks like JIS that's what you want to call it I Thought I saw one right here. Got more than just two.
isn't there? The guy would think, All right, there's two. Where's our third one? Maybe right over here in the middle. can't see. You guys are all up in my way.
We'll do some feeling. Feels like there's a third one in here. Foreign. There it is.
Come in with the aftermarket here. We just nailed that the first shot. Oh, take it back out, huh? I Told him itself. see if we can't get a screw started in it here.
Foreign. foreign. Catch a couple threads in the next hole here. All right, like a couple professionals.
foreign. Plug in directly, but we're going to be better served to chop it off. No, no, hopefully it's the polarity is correct. We'll cut this off.
direct wire it. Call today. Well, let's see. So I Looked up inside the old motor and the terminals all burned out inside of that sucker.
All right, taken. Chop it off he wants to go back to OEM All we can do is go down to the salvage yard, try to find one of these connectors and go back that way. Oh let's see what do we have? Black blue? Gonna strip this little guy back here? Come on baby, let's see. I Brought us a couple of connectors I Don't know if we'll be able to get a blue one on there.
we'll be a little on the large sides. Yes sir. I'm about to go full. yellow.
Slide that up on. Remember to squeeze a little tug, strip back down. same thing I Got my section. it's going crazy about now because we're not putting a connector on it.
but that's okay. You like to make people crazy and at the end of the day, if this fails folks, it's my problem anyway. so not a big deal. There's a fail.
Foreign: I do have the key on contact. Oh goody. it's even blown in the right direction. I'll shrink these little guys down here.
Foreign. That should piss people off. Why do they piss people off? I Don't know, but the old Carmike section usually gets a little testy there when. I Use a crimp and seal connector. so it's a mechanical crimp they seal. they have adhesive in them. They almost never fail unless somebody crimps them incorrectly and breaks the insulation. I Don't know.
Maybe people get pissed off because they work I'm not sure. I Enjoy doing it before I Forgot to put this little guy on I Looked right at it in the Box too fresh air deal there for the mortar. That's what you get for being a jerk. Echo Chrome Socket Impact Foreign.
bounced. It feels like it's got about 15 pounds of air in it. so that's probably why I was so wishy-washy in the back end. 17 First try.
Look at that. There's no flat spot on each Factory ones. so let's see if we can't just grab it with a pair of vice grips here. easy I thought I Had all of you there's one.
try the same thing on the bottom here. Come on baby. All right there we go. Yeah, throw the whole thing away.
same part. number. left and right are the same damn boy. These are 17 mil also, but it's those lock nuts that are smushed down deformed.
However, these have Flats on the inside so you can use a wrench. You want a skinny one though? 16 mil on this little fella. I'll go like this here. I Have to hold that.
look at that. Of course the opposite side is exactly the same. just on the opposite side. Let's take that baby back in there.
These are actually pretty easy sway bars some of our links to do. It's nicer to say part number: see if we can whack them babies down without holding them. Nope. let's get that wrench up in here.
There's that. Let's hold the bottom ones for cutting. You gotta be careful because you can wad them suckers up if you're not careful. Come on baby.
one more. I'll get dug it for good luck. Uh, that's it folks. Let's put the wheels back on it.
I'm trying to tick every box so we're gonna use a torque stick also. Let's see, we better check the tire pressures like I say bounce these on the ground. This one felt like this one felt like about 28. yeah, 27.8 like I said I bumped the other one.
That one felt like it had about 15 pounds in it. Tire pressure lights on and flashing. so he's got sensors that don't work. but it's not a big deal.
It doesn't fail inspection for it yet in the Prny so nobody ever fixes them. Yeah, that sucker's pretty flat. like I said. you can tell when you're driving it too.
It was pretty terrible. See what we got? 15. yeah, look at this guy. 14.9 Wow.
I could set up a little stand at the fair. Bring your tires in. Let me guess your weight stuck right up. All the tires are about flat.
I See it's got some Mavis All Seasons must be able to put out at Mavis Tire must be they didn't Uh, check to see if the sensors are leaking or you know, crowded around the beads and that kind of stuff. Well my guy Josh does tires here. We always take care to, you know, clean all the beads. So he's got these three here because we're waiting for the seals for the TPMS sensors because they leak too. So we we clean them all and I think you guys have seen it in the past. We use the old fry Lube on there so it's a tire safe. You know, grease so to speak. keeps the rim from getting all corroded.
And I See the Napa guy was just here and he dropped off these TPMS sensor seals. Get this! Toyota So there we put the new uh nut on it, the new seal, the new screw, and the new valve core. and a new cap of course and that'll uh, keep you from getting comebacks. Take a little dude around town here, hopefully she's a little tighter in the back now.
boys, that's better. She's ready for whacking so then clunking back there anymore either. I Think that'll do it folks. I'm just gonna go back to the shop here.
We've got a good blower action. We fixed his rattle both of them, the rattle in the rear suspension, and we fix the rattle underneath without just taking the guard off and throwing it in the trash. you know, but try to keep everybody happy as much as we can except for our butt connectors and torque sticks and stuff like that. Oh, and chrome sockets on impacts Anyhow, going under in that comment section Instinct Facebook You guys know what to do.
There's my reviewers. If I can do it, you can do it. Oh thanks for watching.
Appreciate your videos and your candor on things.I’ve learned quite a bit by watching and really appreciate your explanation on the why..
You always make it look easy..
Thanks again !
Think it is more because that is not how they would do it. Or maybe they think it cost too much to use butt connectors. I have started using them, and not sure I like them. But they sure beat a twist and tape job, and look way more professional. I personally want to do things to make the work look professional or as close to OEM as possible.
Worked for 38 years on industrial food processing equipment and used crimp connectors all the time only had a few fail and with heat, cold (frozen foods) cleaning chemicals are a lot more issues for failure the in a car even in New York!
Ok Eric, for us hicks in Indiana, what is the PRNY?
Love the creme Brulee Torch. Lol.
Had this on in the background and the moment you said "Someone's already played the washer game" I still knew exactly what you were talking about.
Tell those ppl what a connector would end up costing your customer.
Merry Christmas to you and your family Eric!
The only person thats gonna complain has never had to work in shop for a living with customers that just want their junk fixed cheap. ps the best hammer for a mechanic is any tool he can reach.
I've been watching too many of your videos. When you were bolting up the new blower motor (made in Canada I notice!) I kept hearing a whispered voice in my head saying, "Enhance! Enhance!" 😄😄😄
South Main Auto- Proudly brought to you by your friends at Fluid Film.
After watchn one of your videos on Krawn. I went out n had my 2018 sierra crewcab sprayed out here in Saskatchewan 🇨🇦. It's a great investment in your vehicle. Thanks Eric for that tid bit
I think Eric's new nickname should be The Tire Whisperer. 😎
Man, that salt belt is ruuf. Im just outside of it and so the salt belt effects me as well but geez, you get inside that belt and it'll strangle and shake ya car till the wheels fall off.
I've watchd your videos since
Our beards were black. Youve helped me diagnose n repair my vehicles through the years your a good man Eric. like many other viewers we love your how to videos.
another good video, I always see you use the wire strippers around the other way I always pull the insulation off against the flat side of the strippers
We’ve had a problem down here in the south that about 5-10 years ago used car lots started to go to auctions and buy those rusted out vehicles. They looked great but people never looked underneath. Then the “new” owner is trashing your shop for charging $800 for a “simple brake job”.
Hiya Eric
Hey Eric, I’ve always had one question for you based on growing up in PA and living in Illinois in the salt belt now. What’s the best cars to avoid rust issues?
I know you don’t work on European cars in general, but my vw/Audis have been pretty fantastic in terms of rust issues.
I’m constantly amazed at the rust issues you find on newer cars in your shop.
👍👊🇺🇲"🤣🤣"
Don't you mean Aluminium rivets? 😂
aaaaaaaaaaaaaaaaaaaaaaahhhhhhhhhh,,you did it wrong,,not really,,i never torque wheel nuts,,had a shop torque them, could not get them undone, went back said, 350lb,is a bit much..theres 8 lugs, 40 lb would suffice. once i count to 7 bangs under the guard, i pull over..
Someone needs to go back to tire school. I think I counted 4 wheel weights on that wheel you were spinning. Love the vids, keep it up
Who cares what tools you use and where you use them, You paid for them and it is no one else Business what you do with them. You got the job done in a fair amount of time. Great job as usual!!!!
keep up the great work.
I’ve been using these crimp and seal connectors for years after seeing them on your channel, I’m on my third box of them and have literally never had one come back failed, I will happily continue using them 🤷🏻♂️
pennsylvania uses a lot of salt too but I have worked on lots of cars with little to no rust… people don't wash the underside of their cars and hit the rust with spray paint before it becomes a problem.
tell those,??,,tossers..to take it to a brand shop,,see what they do & what it costs..
blowing in the right diresction,,that sucks..
Am a certified Armchair Mechanic with over 6 years of use on the same chair and I'd say that all of those repairs are acceptable.
Being a mechanic in the rust belt keeps your on your toes. I live in Texas, and I see you repair relatively new vehicles of things that are unheard of here in the south. My daily driver is a 1997 GMC Sierra. This truck wouldn't exist anymore in the north.
Great job. Thinking of becoming ur neighbor so you will work on my car…..lol……
You are always so even tempered. Have you ever sent a part across the shop in a moment?
i think some people get pissed because there JERKS!!!!!! LOL!!!!
Have you ever tried using those spring loaded automatic wire strippers? I'm addicted, now that I've learned how to eyeball the gauge of wire lol. Of course, your tool can both strip and crimp so its probably saving you time at the end of the day 🙂
You never fail to entertain, thanks Eric!
Hey, that aftermarket blower appears to have been made in Canaderp. That`ll be the Cockford-Ollie !
I was waiting for some mouse poops to pop off using that handy torch 😅
It's funny, I could hear the intrawebs yelling at me this past weekend when I used a chrome socket on my impact. And I haven't posted videos. Wow, they are loud!
Keep being honest.
Love you.
Peace.
There are quality crimp connectors. Then there are the crappy good-for-nothings hanging on shelves of parts houses.
My own personal experience: I use crimp-ons only on copper wires. Everything else seems to slip out like a limp noodle.
Good job Eric .
12 point chrome or go home
Same in PA.. but with my gravel roads it rips any coating off.. got 12 years out of my last truck. The stay hammered the roads today with the liquid spray in the snow. People still crashed like allways in the snow and got stuck.
Imagine there was a band that played for all the haters called Eric O and the Flush Cuts. Cause he doesn't give an expletive
The classic SNAP ON PWCS7ACF. Best wire stripper/crimper
Well if that ain’t the fanciest river gun I ever did see.
There is nothing wrong with cutting the plug & crimping the wires. Plugs do fail, as was the case with the OEM one. In theory the crimp joints you did should better than a plugged in joint. As you say the car won't be long in this world, so it wouldn't be worth purchasing a plug that you would then most likely crimp the tails on anyway – you could have soldered I guess, but you could have done this here also. Some people just complain because they can, not because of sound argument.
Amazing that a 2014 can have enough rust to be ready for the crusher!
You have an amazing shop, clean floor, no junk laying around and no half-finished projects.
My blower motor started "clicking" on slow speed on the way up to Philthydelphia 85k on it in Soused FlaDUH it's on ALL the time MAX HIGH with wifey in the car! Went over to the old shop in Nude Joisey and took it out and earled it up it air tool earl when I seen the zip codes they wanted for even after the market! No more clicking, now it whirrrrs! lol I might give it a tree in juan earl when I change the engine earl tomorrow. Just one thing I wood have done before nipping off the plug end on the new blower check operation!
Where's Eric the car guy,tell us,you know,wait I can't Handle the truth.😱😱😱
Noice
Good job I’ll do the same in my trucks or any other people I work cars with
Could you use heavy duty truck bed liner paint on the underside of your vehicle when new to prevent corrosion. Has anybody tried that ?
Another great video. Thanks😉🚙🚙
"I like big butt connectors and I cannot lie …"
I am surprised to see a Made in Canada sticker on that fan. Is that allowed in The USA?
I use woolwax. I did research before I bought it and heard it's better then that fluid film, but I never tried to fluid film to say for sure. This woolwax works very well. I'm over here in Youngstown, Ohio and the salt takes all our cars out also.
What brand are your wire cutter/stripper/crimpers? Never mind I seen the snap-on logo when you turned them
Sounded like the aftermarket fan came with bearings already going bad.
Well Eric im a fan of those crimps so no complaints here! Would like one of those neat torches thou!
What on earth are you all putting on the roads that eats chassis up like that? Sulfuric Acid? They dont even get ate up that quick here in the midwest that fast by the road salt.
Fun little video. Pleasant to see when you diagnose a problem and recommend a solution the owner approves, you do the work, and the car's back on the road. I'm interested in fluid film, but I don't think we use enough salt here to cause a problem. In the old days I read the drivers in the northeast learned to drive on snow and ice and thus didn't use all the chemicals.
Love your sense of humor, keep on keeping on!
Oh my God you drilled a hole in the frame don't tell the Democrats God bless
Yeah you can't throw it the trash cuz too many Democrats are watching God bless
I don't blame you for not replacing the burnt connector, if this car is as close to the crusher as you indicated the new motor will probably out last the car.
👍😊
I take Walmart must of balanced the right rear tire lol it counter balance with a .25 oz weight just leave the dam thing
I live in Michigan and our junk is just as bad as PRNY. The only difference is we don't have state inspections so as long as it has light, turn signals and a place to bolt the license to late you can drive it on Michigan roads. Although our roads ain't worth driving on either. When I was 17 I had a 1985 dodge pickup that had structural carpet in it if you moved the carpet back you could count road stripes through the floor
"New Hampshire Oil Coating"… must be what I call the "Mustie One Treatment"
No brake clean, no rust preventor…. waste of a video. 😆
Eric Have you ever set something on fire that wasn't intended???
Oh man, did you get her out of the ditch?
I realize that this is a 2014 but I've never had good luck with aftermarket blower motors. They usually make noise, don't blow as hard as the OEM and I wind up replacing them in a year with a OEM.
We use those crimp and seal connections in some pretty nasty places. Done right, they are watertight and strong enough to hang from. They even make some with solder bands inside for extra measure. Solid repair
Having fun with the trolls again at we? Good job. 👍
Does not sound too healthy.
JIS for the win!
😁
Love watching your episodes, Eric!
Vice grip trick never works for me, it was staged!!! Q2…
I like in one of your previous VLOGs, you work on a truck that has fluid film treated. The truck looks great for the age. Fluid Film is a nice service you provide… Great job on your repairs… =)
Wonder if Eric O had ever considered moving to a non-salt belt state. Its too bad NYC and Buffalo have ruined NY, its such a pretty state.
I like your call on the repairs… just fix what is broken on the vehicle and is safe to drive… Nicely done… =)
you break the insulation by not using the correct crimp on the plyers . they have two crimps insulated and uninsulated terminals
I put a spade connector on end then plug it in
Just put a new AC compressor in the daughters car, the original clip just crumbled away so I chopped the fittings off and crimped/hard wired it. 2004 Hyundai Santa Fe.
Don’t like it? Shoot me.
You do it so well..jerk
Hack….unsubscribed….lol.
I like the crimp and seal. They work great. I use Thomas & Betts crimpers. What type were yours?
How many Ugga-duggas equals 40 foot-lbs.?
My wife unit has a 2016 Tucson. In a panic, I went to check the rust damage. There wasn’t any. I guess living in Texas is a good Fluid Film substitute. 😂
Love your videos. Thanks for taking us along!
The more rust the better MPG!
Don’t pay any attention to those arm chair mechanics I been in this for almost sixty years, you do a great job for what you have to work with RUST
Well done mate – decent honest repair!
I'm surprised that you don't try to sell a Fluid Film job to these customers. I would buy it if my car was rusting away. I have a 12 Outback that gets washed after wet salty roads and I use the car washes with the undercarriage douche
People complain about the crimp connector repair but if you buy a replacement connector they come
With crimp connectors
Oh yeah! 👍👍
Mr. O Next time you talk to Ivan don't mention or include in the conversation anything related to Prius's. He might flipout! Infact- tell him you want some advice on their repair! And stand back. lol
MY 18 SUBIE IS ALMOST 5 YRS HERE IN CT!!!!!!!!
20K ON IT HAVE VERY LITTLE RUST
BRAKES HAVE SURFACE RUST
ENGINE IS PERFECT