Before you ask, here is the link for the right angle impact gun on Amazon https://amzn.to/3GG46XK
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs
I had a water splashing in my passenger door once.. drilled couple holes to let it drain, problem solved
Never seen you use a torque wrench before today good stuff keep it up
Hey Ray, did you check or replace any other bearings?
What no fluid film to prevent that terrible rust jacking known to plague the cars in the Rust Belt of Florida
Get to the chopper!
Hey, what if you tried this for the stethoscope audio: Take your patented 3/8" extension stethoscope unit and place on end on the knuckle and then touch the ear end of said device against against the body of the Go-Pro? I bet it would pick it up. Great content BTW.
When are you gonna make click or doo da doo da doo shirts from some of your phrases?
Hope you also reinstalled the sensor…? You probably skipped that part in the video.
You neglected to show that the other side wasn't Mr Crunchie…
The back brakes on my Scion Xb click when I'm stopping. Doing it for six years. No one knows. Nothing has blown up. So… lol
Wow never seen that before so much water out of a door I'm surprised it didn't short out some of the wiring it had to have touched speaker wires and probably just missed the window switch though
Did you reinstall the speed sensor?
Love the videos
But was anyone else concerned when he did literally everything in reverse but either forgot to put the ABS sensor back in place or just forgot to show us that he did it? 🤔 Haha
Was that helicopter a Blackhawk? Or a cobra attack helicopter ? Or a Sikorsky?
Inquiring minds need to know..🤪
Much better than reading some dumb book.
Grab the coil spring with your hand and spin the wheel. You will feel a bad bearing vibrating through the spring
Did you test the opposing wheel bearing?
piece of a broomhandle,or length of 5/8 heater hose works also.
I was waiting for a gator to pop out of that door when he pulled the blockage out!
I'm so jealous. That thing would've been near welded on with rust up here lol
In FL you just look at those cars and they practically fall apart.
Good stuff
Is it a fastener if it's holding the brakes? I feel in that case it's more of a slowener.
The sensor ? Messing with my mind.
That was a LOT of water in the door!
You can use your ear you can put that extension like on the bone of your ear just in front of your ear though on the bone and then you can actually hear it more or you could use a rubber hose put the rubber hose in your ear and the other end on the bearing sometimes that works or sometimes I like like to use a big screwdriver and then just put it up against the bone of your ear
I think the FBI or the CIA was following him too close and he could hear the helicopter and he thought the helicopter was in the trunk he's he's a drug runner he's a bootlegger
What's the clock mileage on the clock when you say so on the clock he what it really means is the mileage the clock is a mileage
Knuckle, Spindle and KINGPIN! At least that's what NASCAR called them! ☝️
NASCAR now only has one nut…kind of just like this channel
Nice old school diagnosis, my Dad used to do that with valves and lifters using a long screwdriver
Must be nice to not work on stuff from the rust belt
Mm, Did i see you not reattatch a wheel sensor ?, Nice one Ray
Not a mechanic just wondering couldn’t you just lube that bearing ?
I had a birth day on 666 June 6th 2006 I turned 5 best birthday I ever had everyone thought the world was gonna end to I basically had a private party at chucky cheeses I think there was like one other kid there besides the people that were invited
Hi demand is good for quality work if not quality maybe no phone calls no jobs.
I'm not in anyway mechanically inclined BUT watching you're video makes me feel like I could tackle a few simple things .. lol maybe 🤔 love the videos to say the least
Hey man just wanted to tell you that your funny. I'm a small engine repair guy/tech what ever you call it and I have heard myself saying clicks when I'm working on something. Keep up the great work and tell the haters to kick rocks
Ray, How much studying do you do to keep up on all of this technology? Your knowledge is astounding.
Thanks for the entertainment and information.
All that being said…..I’m assuming that you put that wheel speed sensor back on…..no?
🤔🇨🇺🇺🇸
Funny… That bearing sounds just like a telephone.
Good practice to do both wheelbearings not just the one side. Generally if one has failed the other one not too far behind
If you spring for the special limited edition Snap-on water containment device (aka bucket) you wouldn’t have flooded out your neighbor.
love watching your vids! In another life I would have gone to school to be a mech
One of the worse cars ever
Not a big fan of Nissans, but that was one of the easiest wheel bearing replacements I've seen in a while.
I'm wondering why all you Techs have to hear the phone ring anyway? It annoys me just viewing your vids.
You never fixed the leaking window seal! or are we assuming the window was left open in a rain storm??
How can a person own a car and not know a damn thing about it.
The obvious thing to do would be look to see if there's a helicopter in the trunk