Surplus electronic parts : https://epartsconnect.com
Stock and Crypto AI Prediction : https://stocksignalslive.com

In this video we replace the front pads and rotors on a 2013 Non-Hemi Dodge Ram 1500 4x4. It is pretty routine just as we have shown in many other videos. -Enjoy!
*Brake Caliper Hanger Set (8 Pack)Brake Caliper Hanger Set (8 Pack) http://amzn.to/2EjRo4k
*2 inch Roloc Sanding Disc Mixed Pack: http://amzn.to/2Boll0z
*Scotch-Brite Roloc Brake Hub Cleaning Disc Kit: http://amzn.to/2CciK6x
*WD-40 Specialist Spray and Stay Gel Lubricant: http://amzn.to/2CciQuV
*Ceramic Extreme Brake Parts Lubricant, 8 oz: http://amzn.to/2BkNVzP
*1/4-Inch 90 Degree Angle Die Grinder: http://amzn.to/2Cc6KC8
*Dual Piston Brake Caliper Compressor: http://amzn.to/2Bn15Mz
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store: https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a Paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the Paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair

50 thoughts on “Dodge truck: front brakes”
  1. Avataaar/Circle Created with python_avatars Larry Pallone says:

    You’re roads are like our roads here in PA……

  2. Avataaar/Circle Created with python_avatars Doug King says:

    Nice job bud.thanks.

  3. Avataaar/Circle Created with python_avatars SilenceDogood says:

    How much of your suspension work charges do you kick back to the municipality to keep the roads bumpy like that… I kid, I kid, as I cry PA road tears…

  4. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Some of the Brake Pad Break in procedures are insane slam on brakes at 45mph 5 times then Light brake pressure at 15mph 8 times then Medium slam on brake 10 times at 50 like Come on With these company's that make brake pads they all have a different procedure I tend to do the sane as you Eric O they don't need to be 300 degrees to Brandish the pads they just need to be used to Mary the pads to the rotors good video Eric O @SouthMainAutoRepairLLC

  5. Avataaar/Circle Created with python_avatars ghhtrainmaster says:

    Those Bakelite pistons are junk. Alway replace with stainless…

  6. Avataaar/Circle Created with python_avatars ExtremeRecluse says:

    I would power wash the area before getting covered with that grime

  7. Avataaar/Circle Created with python_avatars Kirk Mo says:

    Best video with the audio off.

  8. Avataaar/Circle Created with python_avatars Mike Robbins says:

    Have you ever wrecked a vehicle while test driving?

  9. Avataaar/Circle Created with python_avatars Robert Tressell says:

    What's going on with your roads? I thought you were the greatest country on earth? And this is the result? I have never seen a road in the western world as bad as that.

  10. Avataaar/Circle Created with python_avatars the reptile guyz says:

    Which autel do you uses ms908sp or mk908p or What's going to work best for Key programming ecu programming in general Or if you could think of a better starting platform That has the capabilities and functions To get beyond your normal scan tools

  11. Avataaar/Circle Created with python_avatars Jon Deitch says:

    Great video. The placing the top pin and hinging it down is a great tip. Thanks.

  12. Avataaar/Circle Created with python_avatars Paublus Americanus AMERICANUS says:

    What I would like to know is every time I buy new pads I have never gotten any hardware. I think you mean those squealers and end clips. Maybe you have to tell them you want them and pay extra. Only been replacing pads since 1970 and they have never given me hardware. Shucks I never knew you could ask for it.

  13. Avataaar/Circle Created with python_avatars Ed Greenman says:

    Been following for a couple years now, good job sir.

  14. Avataaar/Circle Created with python_avatars Lyndon Chappell says:

    I thought only us southerners panic when snow falls.

  15. Avataaar/Circle Created with python_avatars Jim Clifford says:

    For brakes on a Dodge RAM, is there a difference between hemi and non-hemi?

  16. Avataaar/Circle Created with python_avatars KRTube75 says:

    It's a Semi Hemi.

  17. Avataaar/Circle Created with python_avatars Eddie Clark says:

    Sheesh. And I thought Hawaii roads were bad.

  18. Avataaar/Circle Created with python_avatars northwest mechanic says:

    I go to autozone for all my parts. I always buy duralast. Never has failed me.

  19. Avataaar/Circle Created with python_avatars syntaxerorr says:

    I use thin film of regular grease…sometimes brake grease between the hub and the rotor and the rotor and the wheel. I started doing this after a very bad experience with a mazda brake rotor that would not come free from the hub on one of my parents vehicles. I also include at least one panic stop in the test drive. Make sure it is tracking straight.

  20. Avataaar/Circle Created with python_avatars Shane Harrison says:

    Had a couple cans of that and someone mentioned that issue and when I was cleaning up putting my toys away both cans were missing and I had non left the person who brought it to my attention pilfered both cans his father brought them back and said the kid didnt think I was paying enough attention to what he was telling me I said that's fine dont bring him back round here then

  21. Avataaar/Circle Created with python_avatars Shane Harrison says:

    Yeah I'll make sure I dont go to that guys shop I like to stop with out clunking and banging

  22. Avataaar/Circle Created with python_avatars Shane Harrison says:

    Fish

  23. Avataaar/Circle Created with python_avatars Shane Harrison says:

    Yeah chip flake or crack remember the good old days when ford had calipers that had 4 stainless steel pistons 2 and a half inches to 3 inches diameter and rebuilds took 20 minutes each

  24. Avataaar/Circle Created with python_avatars Lawrence Jensen says:

    Yeah let's play that game
    What's that smell? 🐐💨

  25. Avataaar/Circle Created with python_avatars Caleb Martínez Medel says:

    jarvis

  26. Avataaar/Circle Created with python_avatars Carlos Navarro says:

    I’m really spoiled three brake kleen intros in one video and they still never get old

  27. Avataaar/Circle Created with python_avatars scott gaydos says:

    Hey Eric, love your channel. I know guys who spray white lithium grease on the hub before putting on the rotor. What is your opinion on that? Thanks.

  28. Avataaar/Circle Created with python_avatars scott gaydos says:

    Hey Eric, love your channel. I know guys who spray white lithium grease on the hub before putting on the rotor. What is your opinion on that? Thanks.

  29. Avataaar/Circle Created with python_avatars scott gaydos says:

    Hey Eric, love your channel. I know guys who spray white lithium grease on the hub before putting on the rotor. What is your opinion on that? Thanks.

  30. Avataaar/Circle Created with python_avatars Nebraskan in Kansas says:

    All I can say is your area is very harsh on a vehicles undercarriage.

  31. Avataaar/Circle Created with python_avatars Nebraskan in Kansas says:

    Shop Husky seen helping.

  32. Avataaar/Circle Created with python_avatars Pip Parker says:

    WD40 stuff stays for "up to a year"….who changes their discs (UK) every year?

  33. Avataaar/Circle Created with python_avatars Stephen Mcgraw says:

    How you like Dodge truck Eric 😂

  34. Avataaar/Circle Created with python_avatars original fireman cancelled says:

    Out of the dozen of videos I have watched no one has yet to show how do you compress the calipers without pushing fluid through the reservoir

  35. Avataaar/Circle Created with python_avatars skappak1 says:

    Excellent vid