50 thoughts on “Fahgetaboutit friday! what’s up @ the shop where is w.u.w.?!”
  1. Avataaar/Circle Created with python_avatars Randy Roueche says:

    I have a 2014 tundra with a flex fuel 5..7 when I come to stop and and start out it lets the gas off s little Its makes it hard to get a to the other side of the road

  2. Avataaar/Circle Created with python_avatars Rodney Miller says:

    If you don’t take care of your family no body else will.

  3. Avataaar/Circle Created with python_avatars Patrick Burke says:

    On a2012nissan frontierthathasatrailerhitchbut does nothhavetrailer lights hookups it bettertouseakitthat ties into the factory wiring or just go to the rear and cutintoth witinghaveakitthat has relaysand suchtotieinto factory wiring

  4. Avataaar/Circle Created with python_avatars turner0224 says:

    I literally have spent hours upon hours watching your videos. Opposed to your vids being scripted for training , your videos are always real world issues never knowing what you’re going to run into. Love each and everyone. First car engine I rebuilt was a 67’ Slant six….And that was around 1972, one wire to run that engine ha ha ha . Somewhere about 50 years to ago. Dead battery : 1. Bad battery ?2.bad alternator ?3.bad voltage regulator ? 4. Bad starter ? 5. Bad starter solenoid ? The height of diagnosing ha ha ha . Being a 15 year old kid no funds to shoot the parts cannon at it, had to figure it out. Now days could still be the alternator running at default voltage and no comm with the PCM……your in-depth videos show exactly why, what and how…….of course Scotty is just going to throw an alternator in, But why ? That’s where you come in…..test and make the call ha ha

  5. Avataaar/Circle Created with python_avatars Frederick Chino says:

    🙂👍

  6. Avataaar/Circle Created with python_avatars orlie clodfelter says:

    2009 Traverse No dash lights, key locks in, no nothing, power to post under hood. Help!! I can't find where to ask a question. Sorry.

  7. Avataaar/Circle Created with python_avatars orlie clodfelter says:

    Question, 2009 Traverse

  8. Avataaar/Circle Created with python_avatars Matt Man Productions says:

    In my years of being in business, the thing you have to remember is this.

    For about every 10 customers you do a great job for will only go and tell maybe 2 of their friends, but if you do a horrible job and rude to a customer those 10 people will go and tell hundreds of people!

  9. Avataaar/Circle Created with python_avatars Matt Man Productions says:

    I think Eric should be sponsored by dorman 😂😂 since he loves those aftermarket parts so much 😂😂😂😂

    Jk

  10. Avataaar/Circle Created with python_avatars David Beardsley says:

    if youre worried about high power rifle and backstops youre using the wrong bullets use light thin skined bullets like for varmit hunting just dont shoulder shoot the deer with them shotgun 22s and pistols are more likely to richet cause of low speed and heavy bullets.

  11. Avataaar/Circle Created with python_avatars Donald Fuller says:

    How come Chevy wasn't replacing frames in there trucks like Toyota did? They are lucky to make it 3 salt seasons here in Vermont. Of course GM being run by the government prolly has a lot to do with no recalls.

  12. Avataaar/Circle Created with python_avatars Jim says:

    Your broadcasting to Google hang outs

  13. Avataaar/Circle Created with python_avatars Big DogCountry says:

    The other NY. That's what we call North Georgia. The " other not Georgia"

  14. Avataaar/Circle Created with python_avatars Alan Matthews says:

    I love the nano!!! Took apart front end of Jeep with it. Great tool,,,

  15. Avataaar/Circle Created with python_avatars David B. says:

    The deer Hunter….F it lol 😀

  16. Avataaar/Circle Created with python_avatars timothy finn says:

    guns are good,i live in ireland where they are banned!!!!!!!!

  17. Avataaar/Circle Created with python_avatars Justin Smith says:

    what do u think is the cheapest best Oscilloscope for a tech for their personal use, not for the whole shop.

  18. Avataaar/Circle Created with python_avatars larry scherb says:

    i have a ? about 3.5l in a ford taurus on cam phasers if you done one

  19. Avataaar/Circle Created with python_avatars Jose Gandara says:

    Torch is best. Liquid wrench is second best.

  20. Avataaar/Circle Created with python_avatars Grimm's Auto Service says:

    I have an employee that wants to go to tech school like Josh… a school girl that wants to be a nurse like Hannah…. My wife is the parts manager…. service manger…..secretary…. and the BOSS….. I do what the boss lady tells me

  21. Avataaar/Circle Created with python_avatars Grimm's Auto Service says:

    we can do W.U.W. for you if you want my kids don't sports…. and we just got A/C in the shop…..you're awesome

  22. Avataaar/Circle Created with python_avatars Dan D says:

    More respect for you Eric after the deer baiting comments. It's NOT hunting, period. It should only be allowed for disabled hunts….my opinion.

  23. Avataaar/Circle Created with python_avatars Chad Gardee says:

    Lol that thing will be rolling coal. FISH BITE lol crazy Eric

  24. Avataaar/Circle Created with python_avatars MFGHOMEMASTER Justin says:

    Hands down favorite thing about you is your unapologetic honesty and unwillingness to change your priorities when it comes to your family. Much respect for you eric.

  25. Avataaar/Circle Created with python_avatars Bob Bender says:

    I am third Generation Auto repair shop owner in PA , love watching your videos wish i had the time to make some for my self

  26. Avataaar/Circle Created with python_avatars Brad Noyes says:

    I thought about the Earthquake 20V impacts but I got a Milwaukee 2763-20 High Torque Impact and 2 M18 4.0 batteries for $220 ($40 less then the Earthquake 1/2") and then I bought a Milwaukee 2754-20 3/8" impact for $130 (another $40 less then the Earthquake 3/8"). All of these were New. The Earthquake Impacts might be great, but they are not really "Harbor Freight Priced".

  27. Avataaar/Circle Created with python_avatars Dave says:

    I had an 02 PT Cruiser that was leaking power steering fluid and I put in some power steering fluid with "Stop leak" in and it stopped the leak from dripping on the ground at least. That lasted for years without the drip returning. Little did I know that it actually was supposed to take Chrysler ATF for the power steering. I guess it was a happy accident. Man, I did not take care of that thing.

  28. Avataaar/Circle Created with python_avatars baggins1 says:

    I just caught onto WUW, was looking forward to it, and setting aside time etc. Now my WHILE life is just turned upside down and whatnot. Tried the brake clean and rag thing but no joy. I do have brownies though. So at least I got that going for me.

  29. Avataaar/Circle Created with python_avatars guy azbell says:

    Mr.O DO NOT FORGET MRS.O ON MOMMYS DAY!
    nothin but net on your videos makes me want to move to Bianca N.Y. or what ever.😃

  30. Avataaar/Circle Created with python_avatars JK Brown says:

    Check out a youtuber, Jim Pytel. He does voice-over digital whiteboard videos for the lecture part of an electrical/industrial controls course. The digital whiteboard software is, in my opinion, a good way to present "powerpoint" type information on video. Not sure how well this would work edited in with the hands-on video portions, but I'd say its worth checking out.

  31. Avataaar/Circle Created with python_avatars STEVEN ST. JOHN says:

    darn good channel, people, content. thanks for so much entertainment and , yes mechanical knowledge. Eric, keep up the good work.

  32. Avataaar/Circle Created with python_avatars Andy Cheatle says:

    My 98 Jeep xj's dizzy just crapped out – I can only afford Spectra Vs World Power Systems Vs Cardone at RockAuto.
    Which is the least shit?!

  33. Avataaar/Circle Created with python_avatars Baxrok2 says:

    Great spending time with you Dr. O!

  34. Avataaar/Circle Created with python_avatars ChillCosmos says:

    Why do the electric fans in Hondas cycle with the A/C compressor? Isn't that bad engineering? Wouldn't you want the condenser to cool while the A/C is temporarily disengaged? And what about the constant in-rush amperage required to get the fans going every time? This is weird to me

  35. Avataaar/Circle Created with python_avatars Dirtyharry70585 says:

    chinese steals designs from the US companies who use the chicoms to build them.

  36. Avataaar/Circle Created with python_avatars Marky 1 says:

    Thank you for leaving this up. I work nights so I can never watch your live stream. And as always thank you for your videos.

  37. Avataaar/Circle Created with python_avatars Dirtyharry70585 says:

    send it to me next time, I'll look at it using linux

  38. Avataaar/Circle Created with python_avatars fredrick harper says:

    Check on evap cooler for your shop for summer

  39. Avataaar/Circle Created with python_avatars King1320 says:

    There is a saying about how if you do good work the customer will tell 1 other person, but if you do bad work they will tell at least 10.

  40. Avataaar/Circle Created with python_avatars Seth Leeseberg says:

    The bait has to be certified organic though. Haha!!

  41. Avataaar/Circle Created with python_avatars WT Farm Girl Videos says:

    Ooooohhh, thumb drive crash…major sucks 🙁 always make sure to close all open folders and programs using the files and tell the computer to "eject" the drive. This ensures everything stays where it should! Also might look into an external hard drive. I've got one that's pocket size and holds 1T of data. They are easy to swap between computers. Thumb drives can be glitchy 🙁 sucks putting all that time and energy into something and poof it's gone 🙁

  42. Avataaar/Circle Created with python_avatars Eric Corse says:

    Some folks have been asking about Rob at One Auto. It is my understanding from someone on Leon's channel that he closed his shop and went to work for someone else. If this is incorrect please correct it.

  43. Avataaar/Circle Created with python_avatars Brad Forrest says:

    Thanks for just taking the time to make these videos people have to understand this is a hobby this is your job

  44. Avataaar/Circle Created with python_avatars Brad Forrest says:

    Is the company Dorman

  45. Avataaar/Circle Created with python_avatars CrimeVid says:

    Best penetrating oil for is PlusGas, better than any of that filthy stuff with graphite in it !!

  46. Avataaar/Circle Created with python_avatars ScanMan79 says:

    What's your other channel Eric? I didn't see it listed anywhere on this channel.

  47. Avataaar/Circle Created with python_avatars Mike A says:

    most precious thing is time. So thanks you for that. Plus the great info

  48. Avataaar/Circle Created with python_avatars Adam Trombino says:

    See? You are in coffee withdrawal! LOL. BTW, I wore my Rigid brand brake line flaring tool as well, same way as you did, since I am in Chi-Town….

  49. Avataaar/Circle Created with python_avatars Tim Wrenn says:

    tst?

  50. Avataaar/Circle Created with python_avatars InsideOfMyOwnMind says:

    Earthequake won't pull the flywheel nut off a Wankle.. 300ftlbs. 236,525,816 ugga duggas.

Leave a Reply to timothy finn Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.