In a previous video https://youtu.be/aWJLUzqK0r0 I had a look at a 2010 Kia Sedona that has a code P0016. I found a bad cam phaser solenoid that we think is keeping the bank 1 cam fully advanced. It is time to pop in a new on and see if it solves our problem. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
Do you happen to upload your good cam/crank waveforms to the web? Drive or anything?
Hello sir. I have a 2007 kia Sedona with a 3.8. Had a fault P0346, cam shaft position sensor, in the ecu. I replaced it. Now the fault (P0346) moved in next door, to the transmission control unit residence. The fault now in the ecu is P1692, immobilizer indicator lamp error… ?
Believe it. The check engine light comes on, after turning off the ignition and then turning it back on. I checked and found the immobilizer light sensor not working. I will pick that up later today. But for cam sensor fault going into the transmission control unit. That is not normal, is it?
The car runs like it has no engine oil when starting it up in the morning. For only 2 seconds. Then after that. It starts smooth and runing all day, is a charm.
Can you give me some advice on were to go from here. I would appreciate it hella much.
Like all your post. I've learned a lot from you. Thank you…
What scanner do you have? Software? I like that it shows you actual vs desired cam timing.
I am having a problem with intermittent missing on this same engine with bank one. Your video has helped me to understand what could be going on. This engine actually has 2 single timing chains and it could be the difference in the values. Mine has the chain rattle at start up because of worn chain tensioners, but not enough to replace due to the time involved. Thanks for a very precise explanation of the problem.
The L is silent
How wonderful you are, man
I just have a question in my head, does this intake solenoid cause knocking sounds when I start my car in the morning because I haven't opened this solenoid for more than 4 years?
also I noticed your kia was taking a really long time to fire
hey man just q question did u check if it had bludged up I'm currently doing one for a client and it had a bad vvt solenoid and it was bludged right up….
"…..'cause there always that OCD viewer…"
Yeah, you know me all too well.
Great job! I just replaced the same one you just did. But have a question how you get out the other one behind it (left bank 2) trying to replace in pairs but when i try to slide it out it hits the manifold plz help?
how much should this diagnostic cost?
So what size drill did you use, and how deep? Looks like I will need to do the same thing on my Sedona.
The 127,000 miles has caused a loose timing chain. All is normal. Give the guy the advice to change timing belt according to manufacturer. Specs. Great job.
You are the best, just viewed 2008 Kia Sedona 3.8 VVT solenoid diag and replace, great info and well done, thanks much.
How much would a typical job like this cost? I have the exact same cost but don’t want to pay a fortune 🙁
5 degrees variation due to aftermarket sprockets or chain?
You're pronouncing Solder correctly without annunciating the "L." Your COMMUNICATION is reaching the people. LOVE YOUR CONTENT. Carry on.
There are part swappers, and then there's this guy…
Have you ever seen an issue where the van rapidly turns looses power and makes it feel like a buck? We've been to 3 shops and they cant figure it out. One of them had it for 2 weeks before he told me the teeth on the timing was off 5 teeth. He put a new belt on and every once in awhile it will start bucking. Not transmission related because engine RPMs drop instead of rise.
I LOVE BEANS!!!
How did you put it into flood moad so fast. ? Did u have it up on the scan tool or did you just hold the pedal to the floor. I know if you hold some cars matted they will go into a kind of flood mode so that the car don't start if it's matted wide open
Why are the new plugs wires both black.. sounds like they want you to short something out and boy more things from the dealer or from nappy lol
That PICO is a bad boy!
I can't believe you soldered that. Nothing like a little intense heat, vibration, and moisture to ensure a durable repair. Is there a reason you don't like butt splices?
Not only will that solder not last, but you doing that possibly made it so the next guy won't be able to fix it correctly without cutting out the ruined wire or replacing the harness.
Man oh man those Kia's are absolute junk!
See you at the auction with your cheap fixes! Good show! These cheap fixes scare me! I don't have your skill set yet!
If you own South Main Auto, delay my last! Salute!
Build a garage on to your house or have the hag park on the street and buy auction troubled vehicles running your own youtube diagnostic show! (Sorry bout the hag refrence, I don't know!)
Sign those cutters with your initials and swag'em next month!
For the love of God will Napa please sponsor us!
The wire repair made me have a solder smoke relapse. I had to go heat some up and inhale deep. Nice job Eric getting deep down into that hole to get the job done.
You don't pronounce the l in solder, you just think it.
What diagnostic software are you using? I assume that program with the OBD2 clip is expensive
I was hoping Eric was going to have to change the phasers, chain, chain tensioner and guides, as I need to do that with my Sedona but I am afraid. I have that horrible chatter sound for 1-2 seconds on startup sometimes.
For soldering invest in some flux paste or liquid. It'll make your day on how easy the solder flows. Tip tinner will keep condition and shine your iron.
IMO and that of google you are pronouncing solder correctly.
Eric, Can you or someone else explain the way you stick the wires together before soldering? I've been doing this stuff for a long time and have twisted the wires and am just curious why you don't twist but stuff instead?
sol·der Dictionary result for solder
/ˈsädər/……I pronounce it the same as you, The "L" is silent
LOL….The look you got when she said, "….SERIOUSLY!?!?!" It truly scares me when a lady uses that word in that tone…lol. Keep up the GREAT work Brother
I'll bet the offset is a wear indicator… either that, or it's related to the different ages/flows of the solenoids. Either way, run it 'till it quits.
The data on the pico looks great looks like it's running properly now very nice fix
Suppose to use wet sponge after every use and clean the soldering iron tip off
😅 somone really giving u grief on solder it's Sawda, saw-dah.. it's Patwa so it's correct enunciation to me 😁pat-wah.. Good job with the Kia
The offset must get interesting on a v style engine if the heads have been cut.
You say soldier the same way I do. Lol try having your wife correct you on every wrong way you pronounce something mine does all the time. Lol
Do they ever say “there’s no L in Autel”? 🙂
Tang “the drink mix for astronauts”