Yes it's another SMA brake job, including not only pads, rotors, brake cleaner and fluid film. It also includes toot around town and a few tips from memaw when it comes to servicing your front brakes.. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained

48 thoughts on “Mazda mx5 miata: front brakes w/ tips from memaw”
  1. Avataaar/Circle Created with python_avatars Lala Jee says:

    I just bout the same can of brake parts cleaner and I love it.

  2. Avataaar/Circle Created with python_avatars Ragen Rat says:

    WHERE IS MY T-SHIRT? MY ORDER IS IN!!! BIG DAVE GOT MY OLD SHIRT DIRTY 🙂

  3. Avataaar/Circle Created with python_avatars John L says:

    Your Memaw is one smart lady! I'm going to use her tips on my next brake job.

  4. Avataaar/Circle Created with python_avatars Jose rocha says:

    So , car owner bought the cheapest set of brake pads that money can buy and pay a professional to install them lol 😂😂

  5. Avataaar/Circle Created with python_avatars David Kerner says:

    Why would u let people bring their own parts ? When they fail, they’re going to blame u.

  6. Avataaar/Circle Created with python_avatars GT350TCB says:

    Just finished the SMA Miata YouTube marathon (clutch, suspension, now brakes). I've done everything but the clutch on my own '91, down to taking the whole dash out to replace the heater core. Suspension was a lot of work on the ground, but I'm in CO and it's not rusty. (How on earth do you deal with all of that all the time?) But that clutch? Oh, hell no. Glad I had that done. Congratulations on tackling that without picking up the little car and tossing it across the bay.

    Your vids are always great. I've done video on some of my work, but getting lighting right and not ruining my camera equipment with filthy hands keeps me from ever achieving your level of quality. Plus, I end up swearing so much that I'd spend hours just editing the audio!

    Fun seeing my car represented and providing challenges to someone else, too! I don't know how you keep that sense of humor, but it makes all of this very interesting as well as entertaining. (Must be – as I said, I just watched 5 or more hours on all the Miata stuff.)

    Keep up the good work!

  7. Avataaar/Circle Created with python_avatars cpngdth says:

    Oh man, I'm so happy I watched this video! My Fusions brakes are just like this one (with the spring clips) and I definitely need the vice grip trick! Thanks, Mr. O! They'll make my next brake job way easier!!n

  8. Avataaar/Circle Created with python_avatars MetalTeamster says:

    " Braaa "… I just subscribed and chit… now…back to my armchair to critique away….

  9. Avataaar/Circle Created with python_avatars THEDRAGONBOOSTER8 says:

    Well done CRC ..

  10. Avataaar/Circle Created with python_avatars Cash Dollar says:

    Wait……you can't use a rubber twice? We're doing it all wrong in the south!!!

  11. Avataaar/Circle Created with python_avatars Cody Wichman says:

    best free tip ever

  12. Avataaar/Circle Created with python_avatars mistermatsuda says:

    What happened to the "napper, not a sponsor" brake cleaner?

  13. Avataaar/Circle Created with python_avatars s1991nick says:

    Does anyone know what type of blasting media he uses for the caliper brackets in his videos? I don't think he has ever mentioned the type.

  14. Avataaar/Circle Created with python_avatars Steve Fleck says:

    Another sweet video. Thanks Mr. O. I think I am beginning to know my way around Avoca…

  15. Avataaar/Circle Created with python_avatars Kurt Zimmerman says:

    Bring your own parts. Charge extra for that .

  16. Avataaar/Circle Created with python_avatars Bohuslav Zettesberg says:

    The ANTICIPATION!!!!
    Break Cleaner !!!!

    Wow!!!

  17. Avataaar/Circle Created with python_avatars Mark Harris says:

    The brake clean drama gets me everytime.

  18. Avataaar/Circle Created with python_avatars Rupert Pupkin says:

    Here in UK most garages will not fit customer supplied parts as they are usually secondhand or poor quality – when the parts prform poorly they blame the poor guy that fitted them….

  19. Avataaar/Circle Created with python_avatars Rob Groves says:

    Hi Mr O please make a sound effect when you use the blueish grease on the breaks. Rob from Australia.

  20. Avataaar/Circle Created with python_avatars Brent Owen says:

    I've come up with a new method to remove bolts that are stuck in your socket. Take the socket off with the bolt and slam 'em on the ground semi horizontal. Try it. quickest way I think.

  21. Avataaar/Circle Created with python_avatars Spelter says:

    You hook up with a "hooker" …. really… after that "one hole is bigger than the other one"….

  22. Avataaar/Circle Created with python_avatars Aaron B says:

    It would seem that not buying pads with the hardware is a false savings. You are spending too much time cleaning the old stuff that it’s probably cheaper to spend the extra few dollars on the premium set.

  23. Avataaar/Circle Created with python_avatars Teribus13 says:

    Is this the same MX-5 you did the clutch on last year?

  24. Avataaar/Circle Created with python_avatars youllnevergetmynumbr says:

    Been doing my own brakes for years. After watching a couple of your brake videos, turns out I've been doing a half-assed job.

  25. Avataaar/Circle Created with python_avatars cubleycat says:

    I got to ask, when you say your "Memaw taught you" is it just something you say or is it true?

  26. Avataaar/Circle Created with python_avatars austin shores says:

    Eric O I have to say you really love your attention to detail and that fact that your so miticulas about everything and that's why you are so good at what you do keep up the great work and P.S. I would watch you do a break job any day

  27. Avataaar/Circle Created with python_avatars Dick skinner’s Shop and snap on tools says:

    What kind of brake clean sounds like rock ‘n’ roll

  28. Avataaar/Circle Created with python_avatars Ron A. Bolton says:

    Is that the one you put the Clutch in?

  29. Avataaar/Circle Created with python_avatars Brian Beard says:

    This video score in the high 90's for innuendo… How long until that violates some idiotic standard on YT? SMA and chilll….

  30. Avataaar/Circle Created with python_avatars Ryan S says:

    Usually you change brakes in pairs so it wares evenly

  31. Avataaar/Circle Created with python_avatars Marshall Heartley says:

    Only a case of brake clean? That won’t last long in the hands of Mr. O!

  32. Avataaar/Circle Created with python_avatars JP Auto says:

    Eric you are more thorough with every brake job than 99% of mechanics, your customers are lucky to have you. I usually don't replace the hardware if the original hardware is still reusable. Even though they appear to be stainless steel, most hardware kits that are included with brake pad sets rust terribly within 2 yrs in salt states.

  33. Avataaar/Circle Created with python_avatars Andy Burk says:

    Electric windows on that thing ?

  34. Avataaar/Circle Created with python_avatars kiddanger11 says:

    Love the brake sound effect

  35. Avataaar/Circle Created with python_avatars Dlf Idgaf says:

    I watched this video 3 times … lets get on to the next NEW VIDEO !!!

  36. Avataaar/Circle Created with python_avatars Av8tore71 says:

    "Gotta work the lube"……….That's what she said!! Lol

  37. Avataaar/Circle Created with python_avatars Original Name 123 says:

    Love me an MX-5 👍🏽
    Shame that the ricers have shot the price up by thousands.

  38. Avataaar/Circle Created with python_avatars Rajvinder Manku says:

    Hi there really enjoy watching your videos and the work you do is excellent keep it up!!

  39. Avataaar/Circle Created with python_avatars Lon Willis says:

    LOVE YOUR BRAKE JOBS ! THANK YOU THANK YOU THANK YOU THANK YOU! I only like your challenging repair videos more….

  40. Avataaar/Circle Created with python_avatars Boofy Fart says:

    We miss you SMA must be a busy week there at SMA was looking for my afternoon Zen session with a new video from you… went back to the archive though all good wishing you the best

  41. Avataaar/Circle Created with python_avatars Nb says:

    Marry me.

  42. Avataaar/Circle Created with python_avatars Hola! Terry Harvey says:

    What you're doing cleaning the caliper mount slide groves and the caliper mount bolt holes plus the lubrication to prevent rust as well as noise is the difference between changing the pads for 89.95 and a true brake job. If you charge extra for cleaning old parts the cost of cheap pads versus quality pads with hardware will be offset. A 1 job. That is the way PROFESSIONAL mechanics do brakes!

  43. Avataaar/Circle Created with python_avatars Emmett Thompson says:

    Most problems in life can be fixed by the proper amount of lubricant. "jarhead Andy"

  44. Avataaar/Circle Created with python_avatars Robert Evans says:

    Congrats on 300k and soon we will have been down all the streets in your town 🙂

  45. Avataaar/Circle Created with python_avatars vwwrenchie says:

    Sound effects activated for FF👍!

  46. Avataaar/Circle Created with python_avatars DIY Rob Hence says:

    Congrats on the 300k plus subs … Followed your channel for a while now First time commentor ever of YouTubes lol…
    Thank You for being such a sharing out going individual … Love you channel and appreciate your knowledge and humor.. Was curious if you could answer this question for the Millionth and One time … What do you think of the

  47. Avataaar/Circle Created with python_avatars Benny Bitela says:

    What are you using on cleaned hub before rotor

  48. Avataaar/Circle Created with python_avatars maurice fyke says:

    Is a bear catholic? – lmao at that. So, Mr. O., are those calipers and brackets painted red, or are they red from a sloppy paint job?

Leave a Reply to THEDRAGONBOOSTER8 Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.