This is a video showing how to remove and replace the window regulator in a 2006 Jeep Grand Cherokee. Any questions or comments leave them in the comments box and I'll get back ASAP.
come fix your car…
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Ive been watching SMA for over 6 years, enjoying every one. Ive never really gone back to the earlier vids until today when I was searching for a video on exactly this replacement. How awesome is that, I get the tutorial and I get to enjoy some SMA classics.
Great job, thanks a lot
Great job y'all. I used your video to keep my wife's driver side window up. I found that one of the two nylon rollers was absent and the other was worn down. So that's as far as I can take it for now.
Cool x
I have a 2007 Grand Cherokee. Unfortunately my window due to frigid temps froze my window and I could not put it back up. Could I just replace the motor itself??
Going to attempt this. the assembly at Mopar was $230 and a dorman is $100 less so I think I'm going to have to go with the dorman
thanks very helpful
Ok
Great video, thanks for sharing
Do you remove the batter cable before you replace a power window regulator?
What if the regulator is inside a riveted panel with no access?
Nice job. Quick, but not sloppy!
Good Video!
Is this same basic design the same for most domestic car/truck regulator removals?? I learned a lot from this video as regulator removals always have scared me because I was never sure how they would come out of the door at one solid piece. I really like those suction cup holders. Do you happen to remember where you bought them?
Number 1 killer of window motors? Unlubricated window seals. Put some silicone on the window seals on the bottom of the window so the window motor doesnt have to work so hard
Thanks for detail video, I have problem with rear window, roll down but it wont roll up. I did not remove the regulator out of door panel yet and try different switch and same result then I detached the motor from regulator (only motor without mechanism behind it) and try it and works in one direction and not the other. Do you think the problem is motor?
Good idea attaching something to the glass to keep it in the up position instead of fighting with it. Thanks for the video.
Loved the video I have 3 things I need to replace on the door panel so I think I will wait and replace all of them together.
My passenger side window is stuck up. Using this for DIY at home. Thanks! $140 for parts @ local store. Too much!
This was the most helpful tutorial to fix something I have ever seen. I did this step for step thought it would take me 3 hours and I did it within 1. Thank you so much you are awesome!
nice vid, it helped me out a lot on my 07 grand cherokee
Great video! I got the new regulator in the Jeep in one hour with the tools put away.
Thank you very much for making the video!
mi grand cheroke is 2000
CLUSTER NEEDLES STILL FADE AND WINDOWS STOPPED
You gotta be kidding me. I may be looking forward to this in a jeep commander. Your video doesn't inspire me, although it may save my life.
thanks for your time making the video , you save me a lot of dough and time…
Thanks for taking a lot of guess work out of replacing the driver side motor window on my 2002 jeep liberty . THANKS FRIEND
Great video! The other videos on this subject are for earlier model Jeeps than the one I have. I have a 2007 Grand Cherokee. This video was spot on. I just followed the steps in the video and other than having some old window clamps that needed some persuasion to let go, all went well. Thanks for posting!
thanks…
Nice video. I was hoping to see a close-up of the regulator mechanism to see which part had broken. If the old elec motor is working, can only the window mechanism be purchased & reattached to the old motor?
I like that little Dewalt impact, that thing is fast.
Don't like messing with door panels, always a pain in the butt.