In this video I bring you along as I swap out the pads and rotors on the front of a Volkswagen Beetle Convertible 2.5. Pretty easy job really. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
Good video
Thank you I have a VW Beetle and this is a Great help.
Thanks bro that was an excellent brake change
What ft/lbs do the lug nuts torque at? Please no fig/newtons
Great job, quick and to the point! I donโt like vw but when the daughter wants one you have to fix the common stuff!
What about bleeding the brakes?
I'm doing brakes on a 2000 VW today, my first brake job on a VW and it looks pretty simple. An elderly lady called me yesterday to see if I work on other people's vehicles because I always have some vehicle sitting out front that I'm working on to flip. She said that her husband has vertigo and can't do it I told her that I would help them out. I'm watching videos just to make sure it's nothing weird to do the brakes. Thanks for the great video as usual.
I drove wrecker for AAA for a while and I still remember the first flat change I did on a Rabbit. Seriously thought I'd broken off the stud or something. Then we were on unlevel ground and was a royal pain to get the spare mounted. Did LOVE towing those old VWs. Easiest car on the planet to hook. No laying in the mud just two T-hooks and a 4×4 and away you go!
HAHAAAA…stumbled upon this while looking for the torque settings on the caliper bolts, stayed for the witty repartee! Subscribed
I have 2 New Beetles. an '03 and an '06. My '06 has 279,000 on it. If you want "genuine" VW parts then you can pay the difference! OEM spec parts from Napa (not a sponsor) etc, are just fine with me, as long as the pads are ceramic. There is no need to pay 5x as much for the same quality. If I know ahead of time, I often order my parts from ECS Tuning, (European Car Service). Their branded parts are high quality, and sometimes as little as 1/10th the cost.
EX: Fuel pump for my '06. Special pump for a METAL tank.
$1,050 from VW.
$750-$850 from local parts places.
$150 from ECS.
What would you do?
More mechanics should hook up with ECS Tuning.
The idea of using bolts instead of studs is that the bolts don't rust up and they don't sheer off or break when trying to remove nuts. What is a good inexpensive scam tool to do an 'ABS pump test/brake bleed'??? I have a 2000 VWGolf with 398,000 miles that I put all new brake rotors and pads. Then the master cylinder went out. I replaced it, but the brake lines were frozen to nuts. Tore them up removing…junkyard time. Now I need to bleed.
One newton-metre is equal to the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long. The nonstandard notation Nm occurs in some fields. You know meters is what the whole world is using except 'merica
Did my front 2009 new pads and rotors and pads are scraping in rotors even when brakes are not pressed. Sounds horrible. ??? Do I need new calipers too or is it a different issue ?
Thanks Man.
Believe it or not but volkswagen actually is German for people's car love the videos dude nice to see another PROFESSIONAL working instead of the hacks that give us a bad name
Lol another fine job
Jeep compass stank bolts in canada they callem lol
"Whatever a Newton-Meter is". It's the unit used by 96% of this planet's population, or 7.7 Billion people, to measure torque. But you ignorant Americans probably think you're alone on this planet.
One newton-metre is equal to the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long. One newton is the force needed to accelerate one kilogram of mass at the rate of one metre per second squared in the direction of the applied force. 1 N-m = 0.74 Ft-lbs of torque.
It is a brave man who works on the modern Beetle. Years ago I had a boss who owned a VW dealership and I promise you that service department was the big money maker, even during the bad recession. Made big money. Parts are crazy expensive
No. A Nm is a measure of pain in numb nuts.
I am sort of surprised, you don't give a small dab of DEOXIT on most all connectors, before you reconnect, as a matter of routine, as the FLUID FILM is….
……nice job, Rick, as always…!!!
Do the rear brakes. Thatโs a good time. Make sure you have your 14mm triple square.
No money lights on in that VW?? The only one on the Earth without em
Very informative channel. I have a Subaru 2015 sti! Can you post more Subaru stuff thanks.
Hello Sir. A quick question. I changed the rotors (discs) and pads on my car but I had to drill out the set screws (they rounded off on me). afterwards I am getting a strange wosh wosh sound. it comes and goes. Can it be the missing set screws?
You said that Chryslers use a similar brake pad wear system that turns on the brake light when itโs time for a brake service. Now I know for sure itโs time to service the front brakes on our โ05 dodge van! Thanks for the information!
I don't like bugs!
Why silicone on the piston?
So what would make the rotors wear like that? I did my own brake job on a mk5 GTI, and the same thing happened after some years – I attributed it to my own incompetence because I didn't clean the hub and grease the sliders, but now it looks like it's a VW thing.
is there an Arizonian counterpart to SMA? I'd be curious seeing the same repairs done except without NY threadlocker.
Is it just me or does every vw beetle smell like a box of crayons inside?
hm… i've never seen one side of the rotors being that bad before, could that be an issue with the caliper(s)?
Heh and im fread of rarely seen USA cars plastic connectors. But i must say you do exactly like i do it(first you have to put it in) on every car USA Europe or what ever..
125 Newton Metres is the same as 92.2 Ft Lb. "Newton metres — Whatever that is". Smart Guy — lovely display of sarcasm. It is a measure of torque, of course. I learnt that in my physics class (in an Academic Course, not Trade Course) at school when I was 18 years young (many, many years ago).
German cars used to be good quality, they are down with the Chrysler\Fiat now-days , just more expensive. Over-engendered, built to get you when the warranty expires.
Mr. O is the only one that make changing brake interesting and fun to watch.
Lug bolts vs Wheel studs vis-a-vis VW The year 1937 The cheapest possible design, 20 fewer parts per car. 1946, Not like we have the resources to change it. Heck! We're fighting for ever spare cabbage and turnip! My S.O.'s 2003 Passat came with a plastic (What else) wheel alignment pin in the tire change tool kit.
Nice work as always :)…If the calipers were painted would you use a screw driver to remove the retaining clip…I personal don't like the chipping paint.
Nm = neuton meter…or use VW specs of Guetentiten. ๐
Saw that you posted a comment on Fox News waiting for trump today
Hi Eric, when you are Torquing the wheels I noticed that you have the vehicle on the ground. The proper way is to torque the wheels while the vehicle is still on the lift. The reason is that there is not to have any weight on the wheels at all. Thanks and I always watch your videos.
Have you ever seen the Red Green show, you remind me of that guy…extremely funny. Thanks for making lockdown a little more bearable.
Are you still cashing in your iron and donating to the rescue?
No lug studs: you get used to it. Saab's/Volvo's have lug bolts. Ehh…
Eric, I enjoy the brake videos, always learning something and saving bucks !!
I'm waiting on my brake job until this blows over who cares about new brakes when your dead.
Is the snap on mid rise lift for sale
Funny story about the lack of wheel studs, they have a massive problem with loosening up if you don't re-torque them. Every car I see on the side of the road missing a tire with an inch of brake disc ground off is a Volkswagen.