Come along with Eric O. as he steps outside of the shop and has to do some repairs on his own stuff for once! In this video his brother Scott comes over to reinstall the Farmall H's real wheel that Eric repaired by welding on a new stopper. He will also reinstall the tire. --Enjoy!
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
THANKS A MILLION!!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

50 thoughts on “Replacing a rear tractor tire – rim repair installation”
  1. Avataaar/Circle Created with python_avatars Robert Wood says:

    Today I learned I need a second tire bead breaker tool to do the job right. Thank you for the video!

  2. Avataaar/Circle Created with python_avatars William Hanley says:

    Just spent all afternoon trying to resolve a similar problem. After seeing this I concluded if he can do it I'm gonna let him. Super H just got a New ignition. Wish I had one when I bought it.

  3. Avataaar/Circle Created with python_avatars Jeffery Bye says:

    Excellent job Mr.O like usual..i love your channel i said it before and i will say it again, y'all and no nonsense knowhow channels are my favorites and the best by far mechanical and educational videos on you tube…thanks a million y'all

  4. Avataaar/Circle Created with python_avatars Don V says:

    Laying down the dimes! Nice. Maybe not full pen with the 110 but gotโ€™er done. Yeah, we had calcium in the Ford 1810 turfs and it would rot the cores. I have the beet juice in my sub compact rears and had a valve stem twist off after 8 years. Seems to deteriorate the stem rubber from the brass core. Sprayed all over me and my Focus parked next to it. Sat there like the little Dutch Boy with my finger in the dam (stem) til my son brought a stack of wood blocks. Managed to save the juice by just breaking down the outer bead and fishing a new stem out. Fun times. ๐Ÿ˜œ

  5. Avataaar/Circle Created with python_avatars Pete Turton says:

    That was brilliant!

  6. Avataaar/Circle Created with python_avatars Todd Williams says:

    Grew up driving those Farmall narrow front tractors. I still love those things. Great video.

  7. Avataaar/Circle Created with python_avatars Roger Thomas says:

    ๐Ÿ‘ nice job your brother is really good and fast at his job he knows his stuff.

  8. Avataaar/Circle Created with python_avatars Wings an things says:

    No need to go to tanning salonโ€ฆplenty of UV from welding arc.

  9. Avataaar/Circle Created with python_avatars kerzwhile says:

    Loved it!!

  10. Avataaar/Circle Created with python_avatars Stephen Lawson says:

    Really enjoyed this video- I drove a Farmall M as a kid and always wondered how the tire maintenance was done – Thanks

  11. Avataaar/Circle Created with python_avatars Stephen Lawson says:

    What kind of welding is this ? Great looking bead !

  12. Avataaar/Circle Created with python_avatars Ron says:

    Sounds like the rear end could use a handful of sawdust. ๐Ÿ™‚

  13. Avataaar/Circle Created with python_avatars The One says:

    That was cool.

  14. Avataaar/Circle Created with python_avatars Michael Dunagan says:

    This was a first for me: at 56 years old with four years of my life working as a hired-hand during the summers, I have never seen the breakdown and reinstallation of a big tall tractor tire.

    I also appreciate the scenery shot. When I did over-the-road trucking I went through Ithaca and Syracuse I think up to Watertown was the name of it: gorgeous land.

    Too bad New York is like Illinois where the wonderful rural land is dominated by bunch of kommies in the major cities.

  15. Avataaar/Circle Created with python_avatars Lee Hodge says:

    I was thinking, wouldnโ€™t that mess up the balance, then I thought, not at least than 10mph

  16. Avataaar/Circle Created with python_avatars jos says:

    I've enjoyed many dozens of your videos and i always enjoy your honest skilled work. Please consider covering all exposed skin when welding. It's not just about protection from heat and sparks, or globs of molten metal. The arc produces intense uv light that causes cell damage same as way too much tanning bed. You know how to weld which means you've done lots of it. Dont make me tell Ms.O that you're flirting with the big C.

  17. Avataaar/Circle Created with python_avatars Jeffery Powell says:

    at work we repaired many tractor wheels even widened some

  18. Avataaar/Circle Created with python_avatars Scooter30FTW says:

    Actually I don't think I've seen a tractor tire replaced before. Kinda interesting actually.

  19. Avataaar/Circle Created with python_avatars Tim Graham says:

    I used to work in a body shop. The painting was my favorite part. Smells better than gasoline.

  20. Avataaar/Circle Created with python_avatars Jim Getz says:

    Outstanding video.

  21. Avataaar/Circle Created with python_avatars onefixitman says:

    LOL….."If he can do it….you probably ought to call him" Best quote I have heard yet.

  22. Avataaar/Circle Created with python_avatars James Jones says:

    I enjoy your channel.

  23. Avataaar/Circle Created with python_avatars WisdomVendor1 says:

    I'm still trying to understand why in the previous video about this wheel, you said that was enough slippage it could shear off the valve stem and cause a flat tire. How can the hub slipping inside the rim cause that? They don't seem to interfere with each other.

  24. Avataaar/Circle Created with python_avatars Mark G says:

    The trick of leaving a bar in to let the air escape between the tube and the tire was well worth the time. Nice weld beads.

  25. Avataaar/Circle Created with python_avatars Harry Kaminski says:

    Does your wife think your tractor sexy

  26. Avataaar/Circle Created with python_avatars Randy Cordes says:

    Your brother did a great job on putting that tire on they are a lot of work

  27. Avataaar/Circle Created with python_avatars Michael Stabile says:

    I'd love to see a brake cleaner coffee mug thing a magger

  28. Avataaar/Circle Created with python_avatars Joseph Roe says:

    Old farmer Eric ๐Ÿ˜†

  29. Avataaar/Circle Created with python_avatars Adrian Resendez says:

    We need a day in the truck vid with Scott and then a Scott channel.

  30. Avataaar/Circle Created with python_avatars Alexis DeVille says:

    I grew up on a then bigness dairy farm in Vermont we had 2 Farmall Hโ€™s and an green Oliver 66 ! Now big farm milk 500 or more cow we had 100!

  31. Avataaar/Circle Created with python_avatars Brian Walter says:

    Still using my farmall super M.

  32. Avataaar/Circle Created with python_avatars John O'Gara says:

    Well Eric your brother made it look real easy fitting that tyre, that's a pro for ya, great work ๐Ÿ‘๐Ÿ‘

  33. Avataaar/Circle Created with python_avatars Eugene Neill says:

    I like it use to have a farmal A

  34. Avataaar/Circle Created with python_avatars Good ole dave 73 says:

    Awesome

  35. Avataaar/Circle Created with python_avatars Sutton Coldfield says:

    Q for Scott – ain't it annoying when the owner hangs around and makes smart-arse comments?

  36. Avataaar/Circle Created with python_avatars Creighton Demarest says:

    Nice vids on the servicing of your Farmall & rim stop repair. Nice to have a brother to help. My mother grew up near by in Wayne over looking Bluff Point Keuka Lake and graduated Hammondsport HS '42. My family still farms there. I bought a '51 John Deere A as a tribute tractor like the one my uncle gave me a ride on when I was six back in the 50's. The Keuka Lake area is very dear to my heart. Work safe, CD in Hillsboro, NH.

  37. Avataaar/Circle Created with python_avatars TheStevester2 says:

    I saw the resemblance once your bro picked up the air impact

  38. Avataaar/Circle Created with python_avatars Walter Francis says:

    Nice weld job ๐Ÿ‘

  39. Avataaar/Circle Created with python_avatars Sasha Whitefur says:

    I vbaen't seen a tractor tire changer in about 60 years, all done by hand. No tools. !:)

  40. Avataaar/Circle Created with python_avatars George Swindoll jr says:

    Love all your videos no matter what the subject!!!! You have a great family, great channel, anyone who doesnโ€™t like them should just go away!!!!!!

  41. Avataaar/Circle Created with python_avatars Jeff Bohn says:

    Wow..you likely hear this more than not, beautiful welds..Nice to watch a master..Miller or Lincoln?

  42. Avataaar/Circle Created with python_avatars WILLIAM SUMNER says:

    Hey Eric O
    Make sure your not using chlorinated brake cleaner while you welding. Chlorine and argon gas produces phosgene gas that is deadly to you . Please look into this. Love your videos man.

  43. Avataaar/Circle Created with python_avatars watch this says:

    A welder hired a helper every time he would go to weld he would tell the helper as a warning watch the weld after the 5th time the helper said you're going to have to watch it my eyes are killing me

  44. Avataaar/Circle Created with python_avatars Leroy says:

    Eric great video Why down vote donโ€™t like it donโ€™t watch it

  45. Avataaar/Circle Created with python_avatars roy archibald says:

    Looks like the first tractor I ever drove.

  46. Avataaar/Circle Created with python_avatars Patrick Madigan says:

    You should do more of these type of videos… I like seeing you and your family… =)

  47. Avataaar/Circle Created with python_avatars Hobby addict says:

    Love the way a Professional ,makes it look so easy!

  48. Avataaar/Circle Created with python_avatars Michael Price says:

    No speed balance or nitrogen fill?

  49. Avataaar/Circle Created with python_avatars northislandnavalbase says:

    When you don't use primer it's almost a waste of paint, acid etching will due, paint won't flake off in a year.

  50. Avataaar/Circle Created with python_avatars WorldRenownedCFE ๐ŸŽค says:

    My dad has one of these tractors, and my dumbass stepmom sold it when he passed.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.