Back to part 1: Cut the Frame, Pull the Cab, or Suffer? Ford Powerstroke F350 https://youtu.be/i8oHvw_Jg0M
Check out my Merchandise Store Below the video for Men's and Women's Apparel, MUGS and Stickers! https://rainmanraysrepairs.myspreadshop.com/
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage right now
Must have for any toolbox!
Mercedes BMW VW Wheel Stud Master Kit: https://amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! https://amzn.to/3IfDeOa
Brake Caliper Compressor: https://amzn.to/3gQBuiB
GearWrench Hose Clamp Pliers: https://amzn.to/33YCVJ3
My Camera Gear:
Gopro Hero 8 https://amzn.to/3mPnpFA
Gopro Hero 9 https://amzn.to/3EKDcM1
Hero 8 Dual Charger https://amzn.to/3EId84c
Flexible Camera Mount https://amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”

Ford f-150 six-liter diesel v8 day number. Three. I've figured out what's wrong with the ac system put in a condenser, a compressor, a belt receiver dryer a new orifice tube. I removed the old two orifice tubes that were in there, but the system still didn't come on.

After some careful probing with my meter device here, we discovered that there were two fuses that were open, one of which was the ac uh compressor power supply fuse number 15 or 15 amp. I think used 20, something like that. Anyway, i threw a couple new fuses in there. Should fire right up here, let's put our thermal meter in the dash and see what kind of temperatures it makes be back in five here we should probably take our goodies out of here.

Yeah there's one of the blow it up fuses, oh, come on there all right. What is the let's verdict? What we got survey says that idol we're doing 58 degrees. I can accept that better than 100 a rat okay, i'm still waiting for a hose barb to show up. So i can extend this hose a little bit and then i'll refill the coolant, and this one is done so mission accomplished.

Success achieved all right. Let's back this thing out make some space - i'm not gon na leave this in the stall for just for one little piece of plastic. Let's get out of here. Can i get out looks like it yeah we're good, oh cute, little horn, that's coming with me all right guys! That's the me wrap for this one thanks for watching this short little video.

I know some of you wanted to see this thing through to conclusion. Again, thank you for watching. Most importantly, don't forget to have yourselves a great day see you guys later for powering down.

100 thoughts on “All that for a fuse? f350 6.0”
  1. Avataaar/Circle Created with python_avatars Liane Cornils says:

    Thats how it goes when your a hot commodity. 🤣😇😊😉

  2. Avataaar/Circle Created with python_avatars Larry Ciarrocchi says:

    Sooooo, you threw a buncha parts at it, then checked the fuses?

  3. Avataaar/Circle Created with python_avatars Carlos Cardona says:

    Should alway check for cause of blown fuse.

  4. Avataaar/Circle Created with python_avatars QOTYIT says:

    🤙🏽🤙🏽

  5. Avataaar/Circle Created with python_avatars Tom Kennedy says:

    Good mechanics have Swiss Army Thumbnails

  6. Avataaar/Circle Created with python_avatars Bill in Phoenix says:

    Great videos, you do good with one hand think how fast you could go with 2. Could you mount a camera on your head like a motorcyclist. I was a mechanic for 10 years, don't miss it a bit, those holes were in the wrong place I would have taken a hole saw and made some new ones to line up with the bolts, then tapered the bolt ends to help line them up too

  7. Avataaar/Circle Created with python_avatars Carey Boggess says:

    Your shop phone… can you change the ringer? My husband is watching your videos day and night, and prrrRRRrrrrr prrrRRRrrrrr.

  8. Avataaar/Circle Created with python_avatars Cherokee2005 says:

    This one was quite the job!

  9. Avataaar/Circle Created with python_avatars InsideOfMyOwnMind says:

    That's a hell of a lot of parts cannon when all it needed was a fuse.🤣

  10. Avataaar/Circle Created with python_avatars Dis Emboweled says:

    Its making what?!!!?? I can't hear you!!!! 🤣

  11. Avataaar/Circle Created with python_avatars Hola! Dave Bell says:

    I gotta get me one of those thumb nail screwdrivers that you put the fuse panel back on, that was pure professional! Thanks for the video, as we all say we all learn something each tiime.

  12. Avataaar/Circle Created with python_avatars Scott Marshall says:

    Fun "ship in a bottle" job. Nice work, but just be glad it's not a NY vehicle. Up here, that job could easily escalate to pulling the motor, as everything from wires to fasteners would be salt eaten, especially with that kind of mileage. NO walk in the park on a Florida vehicle either, but you nailed it. There are so many things to go wrong getting to the buried accessories on these newer vehicles. Some repairs require a minor miracle to pull of as described in the book. Thanks for filming it, it's gotta be tough on a job like that. Looking forward to tomorrow, don't know how you do it.

  13. Avataaar/Circle Created with python_avatars Rob Ames says:

    I suspected the fuse as well but I cannot understand why it should blow. The magnetic clutch was not shorted to ground, it did not work but it was jammed up against the compressor, This should not have caused more current to flow. Please let me know what I am overlooking

  14. Avataaar/Circle Created with python_avatars Sting says:

    As the compressor died it drew more and more current until the fuse protected the wiring and prevented a fire.

  15. Avataaar/Circle Created with python_avatars Keith Woods says:

    I bet the frozen AC compressor caused the fuse’s to blow!

  16. Avataaar/Circle Created with python_avatars Ron Sloan says:

    Well that was a challenging fix. It was really, really broken. Great to see you got it running properly again Ray.

  17. Avataaar/Circle Created with python_avatars Ping Pong says:

    I identify as a WORLD CLASS MECHANIC – I should now be able to fix all the problems on my beater.

  18. Avataaar/Circle Created with python_avatars James Kennedy says:

    👏👏👏👏alright stay tuned for part four. Patiently waiting for it

  19. Avataaar/Circle Created with python_avatars Paul says:

    Dang it Ray, you didn't do clicks on the fuse panel cover, it's gonna fall off and be a come back!!!!!!111111qqqqqqqqq. lol

  20. Avataaar/Circle Created with python_avatars G Crauwels says:

    Yay!! Success!!

  21. Avataaar/Circle Created with python_avatars Ramon Chavez says:

    But you didn’t take us through the process. I feel incomplete. You said it was a ground. 😃

  22. Avataaar/Circle Created with python_avatars 9mm Mike says:

    Eff Tree Fiddy

  23. Avataaar/Circle Created with python_avatars Marshall MotorsSC says:

    Ye ole fuse popparooni

  24. Avataaar/Circle Created with python_avatars jacob roscoe says:

    Love them fuses….

  25. Avataaar/Circle Created with python_avatars Mr G says:

    Great job Ray!!! Very impressive gent to observe on his mastery of mechanical ability and know how!!! Thank you for sharing all the work on this vehicle!!!

  26. Avataaar/Circle Created with python_avatars Chris Freemesser says:

    Glad you're finally done with that POS and can move on with your life 😉

  27. Avataaar/Circle Created with python_avatars Hola! Garry Reid says:

    Wow so much work on that piece of crap,so happy you got it buddy

  28. Avataaar/Circle Created with python_avatars Mitch Staff says:

    I called it last video.

  29. Avataaar/Circle Created with python_avatars Ju M says:

    Yeah, you want to add that segment of hose, so that when the engine rocks back under acceleration, it doesn't pull out.

  30. Avataaar/Circle Created with python_avatars Ju M says:

    makes sense a fuse was blown with the compressor locked up. It can't continue to engage the clutch when seized.

  31. Avataaar/Circle Created with python_avatars William Squires says:

    I think the Ford needs to turn into a silvery rado. 😏 Or, in this case, a yellow one.

  32. Avataaar/Circle Created with python_avatars D Eastman says:

    Why use a screwdriver when you have long thumbnails 🤪🤪🤪

  33. Avataaar/Circle Created with python_avatars Poppi Arlin says:

    The question is, why would it blow two fuses? One I can see however two fuses is not likely a coincidence.

  34. Avataaar/Circle Created with python_avatars MrMagnat007 says:

    Money light is still on ?

  35. Avataaar/Circle Created with python_avatars Saunders Jones Jr says:

    WHEW!!!

  36. Avataaar/Circle Created with python_avatars Mike Mcguire says:

    Thanks.

  37. Avataaar/Circle Created with python_avatars Robert Amantea says:

    Wouldn't you check the fuses first before replacing all the i'm just kidding. Watch the other videos first before saying anything like this nubcakes<<<

  38. Avataaar/Circle Created with python_avatars Peter Ganter says:

    The old thumbnail screwdriver trick. 😀

  39. Avataaar/Circle Created with python_avatars Ed Chenal says:

    Very involved repair. You are a patient person. Thanks for the informative video.

  40. Avataaar/Circle Created with python_avatars Sam Jackson says:

    Comment added…

  41. Avataaar/Circle Created with python_avatars Rigell says:

    Glad to see that there's a light at the end of the tunnel for you, Ray 🙂 I do IT for a living and nothing's better than finally fixing an issue that just wouldn't go away.

  42. Avataaar/Circle Created with python_avatars Thirza Peevey says:

    I learn something every time I watch. I very much appreciate all the good mechanics who take their time to make content like this. It can only raise the educational level of both the mechanics and the consumers.

  43. Avataaar/Circle Created with python_avatars Kentucky Ranger says:

    Hate to say told you so… 🤣🤣

  44. Avataaar/Circle Created with python_avatars Alex Wolf says:

    When the comment section actually has a WIN!

  45. Avataaar/Circle Created with python_avatars SStreet says:

    Good Work Ray! Man that F350 was named right, a 350% pain in the ass.

  46. Avataaar/Circle Created with python_avatars 8760 says:

    Almost forgot how loud the 6.0 was.

  47. Avataaar/Circle Created with python_avatars Kenny Shepherd says:

    Looking good!

  48. Avataaar/Circle Created with python_avatars 73 Maverick says:

    I was confident you would get it to work. If this were my truck I would've smashed it into a tree by now, lol.

  49. Avataaar/Circle Created with python_avatars mark E mark says:

    This wasn't a fully loaded parts cannon fired for two fuses, was it?
    👍😎👍🇬🇧🇱🇷 m-E-m

  50. Avataaar/Circle Created with python_avatars Moefuggerr says:

    Finally Done

  51. Avataaar/Circle Created with python_avatars CHRIS LJ says:

    Yeah, there were commenters yesterday that predicted a blown fuse. Congratulations to them!

  52. Avataaar/Circle Created with python_avatars Samuel Williams says:

    You the man Rainman.

  53. Avataaar/Circle Created with python_avatars Job38 Four says:

    Good fix, I like happy endings and for some reason I didn't fall asleep on this video……

  54. Avataaar/Circle Created with python_avatars Robert Bamford says:

    Fuse did its job! Mission accomplished! Ordeal ovair! Thanks for the series. Hope the owner had enjoyed the savings from using the wrong parts in a previous repair.

  55. Avataaar/Circle Created with python_avatars Steve Schaff says:

    nice thanks for making the follow up video!

  56. Avataaar/Circle Created with python_avatars Wills Restorations says:

    Please explain to me how 58 Fahrenheit is acceptable for a completely new AC system from A to z. You should be in the mid-40s.

  57. Avataaar/Circle Created with python_avatars bd O says:

    Combat pay you should get. great job,

  58. Avataaar/Circle Created with python_avatars Mykl Langridge says:

    Great to see it was an easy one to finish off! (I have to admit I was dreading hearing that the belt or something had eaten part of the wiring loom!)

  59. Avataaar/Circle Created with python_avatars SomeGuyInSandy says:

    As an internet expert Ford 350 diesel mechanic, I agree that the fuse was the problem all along. /s

  60. Avataaar/Circle Created with python_avatars John Kinnane says:

    G’day Ray and greetings from Tasmania Australia 🇦🇺 your a good technician and I wish you were down here, you follow through even with the most complicated problems to find a solution. I enjoy watching the channel look after yourself regards John

  61. Avataaar/Circle Created with python_avatars John Henry says:

    Which comments told you the end of the last video. Remember to always check the fuse first.
    Good vids big guy

  62. Avataaar/Circle Created with python_avatars William Mulligan says:

    You quite often quote bolt sizes in mm and AC charges in kilograms any chance you could use Celsius as well.;-)

  63. Avataaar/Circle Created with python_avatars Ted Enderpal1 says:

    Had similar blown fuse on 2001 Jetta, fuse holder was corroded.

  64. Avataaar/Circle Created with python_avatars Richard Warnock says:

    So a little Probing interesting 🤔 blowed up Fuze!

  65. Avataaar/Circle Created with python_avatars Kevin Durica says:

    I wish we could see a customer's reaction sometimes or hear the total price of the job.

  66. Avataaar/Circle Created with python_avatars Dan Geiger says:

    You're a toolaholic Ray👍😃

  67. Avataaar/Circle Created with python_avatars Dan Geiger says:

    Wow,Rays new tester lights up like a hockey goal red lamp.

  68. Avataaar/Circle Created with python_avatars Ed Crego says:

    nice job cool man alot of awkward hard work

  69. Avataaar/Circle Created with python_avatars jdraupp says:

    The 6.0 powerstroke doesn’t have a check engine light, it has a change engine light.

  70. Avataaar/Circle Created with python_avatars spyder1110 says:

    Where's the Pew ? How do we know you shut it down if you didn't do the pew?😉😅

  71. Avataaar/Circle Created with python_avatars Arthur Apostolopoulos says:

    Hi ray. I have the same engine except in van form and I'm wanting to do this same job on mine plus a new transmission cooler……can you give a ballpark on what this job that you did cost?

  72. Avataaar/Circle Created with python_avatars Guess Who says:

    Go Chiefs

  73. Avataaar/Circle Created with python_avatars night train says:

    fords and a stick of dynamite go together

  74. Avataaar/Circle Created with python_avatars Bone Daddy says:

    If you had to replace the compressor, I wonder if we’d see a 60 minute video of flying F bombs and wrenches!

  75. Avataaar/Circle Created with python_avatars Don's Junkmail says:

    134 or 134 qrst

  76. Avataaar/Circle Created with python_avatars GeekBoyMN says:

    I've had that happen, get so deep into a repair and spend so long on it, you're just ready for it to be done and a simple little thing escapes you. Cars and PCs, they can be complicated.

  77. Avataaar/Circle Created with python_avatars sawmill123456 says:

    What did it cost them to get all that fixed??? Ballpark number???

  78. Avataaar/Circle Created with python_avatars John Larkin says:

    Ray a really great video and I must say the camera angles you manage to get are fantastic unlike poor Ivan from pine hollow although his videos are entertaining as well, great work and great result itwas only a fuse to wrap it up as the owner was in for a hefty bill as it was. 👍

  79. Avataaar/Circle Created with python_avatars Don's Junkmail says:

    One for Chunks one for Bubbles…

  80. Avataaar/Circle Created with python_avatars Michael Manke says:

    The owner surely is impressed by your skills and brings this truck in for additional repairs. 😀

  81. Avataaar/Circle Created with python_avatars Jack Martin says:

    Smartness goes a long way!

  82. Avataaar/Circle Created with python_avatars Darrell Adams says:

    Hose barb. Nice . An uncle of mine ( ASE certified ) will sub out automotive part with home improvement parts if possible and save customer money while doing shade tree repairs.

  83. Avataaar/Circle Created with python_avatars Dirt Biking with Donnie and Chase says:

    Nice work! How did you handle that ground wire mess that you showed when you were taking it apart in the first video?

  84. Avataaar/Circle Created with python_avatars Thomas Melander says:

    Why dont u do the sound after u turn it off anymore it so funny and me and my wife like it alot please continue

  85. Avataaar/Circle Created with python_avatars Sho chan says:

    I learned Something new, If air condition failed check fuse First.

  86. Avataaar/Circle Created with python_avatars Shawn C says:

    Of course…it's a Ford. The epitome of questionable engineering practices.

  87. Avataaar/Circle Created with python_avatars Bad Monkey 17 says:

    I wouldn't mind seeing a video of you shopping inside the Snap On truck, if the guy will let you. i bet there are some sweet tools in there

  88. Avataaar/Circle Created with python_avatars Brad Haines says:

    i imagine when it ate the belt it overloaded the fuse and popped it. when you put in the new parts the fuse was still popped and that was your problem. should be all bueno now

  89. Avataaar/Circle Created with python_avatars Eldon Howard says:

    👍

  90. Avataaar/Circle Created with python_avatars Jeremy Murphy says:

    Back to Rule No. 1: Check the simplest things first.

  91. Avataaar/Circle Created with python_avatars Shane's Trains says:

    I knew this video was coming 😂

  92. Avataaar/Circle Created with python_avatars boeli space says:

    Up to the next.

  93. Avataaar/Circle Created with python_avatars Mike Hudson says:

    After major parts canon and it was a fuse. That will be $1500 for a blown fuse.

  94. Avataaar/Circle Created with python_avatars Jim Cullen says:

    As usual, great video sir.

  95. Avataaar/Circle Created with python_avatars Bruce Bates says:

    Bet your glad to get rid of that one.

  96. Avataaar/Circle Created with python_avatars Ben Aldredge says:

    Ray, what a sense of accomplishment you must feel when fixing such a monstrosity like that. What a PITA!

  97. Avataaar/Circle Created with python_avatars Joe Landavazo says:

  98. Avataaar/Circle Created with python_avatars Mikey D. says:

    Ray, how did you reattach that frayed(?) ground wire to the frame???

  99. Avataaar/Circle Created with python_avatars Saint Si says:

    Did you charge the guy for all the parts and work before you found it was the fuse?

  100. Avataaar/Circle Created with python_avatars MrOrlandobob2 says:

    that ground wire that was screw to the frame

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.