Click to play the original Youtube video. Post navigation If you re not making a mess you re not making a paycheck! mechanic shop! #repair Lower intake manifold leak-final assembly! oil in coolant gm 3.8l 3800 series ii engine #repair
Hey Ray. Hope you’re not trying to muscle your way into our friend Eric’s ‘I do Cars’ territory. 😏 Reply
That right there is the definition of the word "catastrophic". It's actually impressive how it seems to have completely flown apart at high RPM. Reply
Hydro lock. Maybe a blown head gasket or drove through a deep puddle and sucked it through the intake. Reply
Why can’t they sue the gas station that allowed these chunks of aluminum to get into the engine? Reply
39th! Hope you and the wife unit and family are having a fun weekend. Roger in Pierre South Dakota Reply
Ford Tech turned indy shop owner Immigration expert content creator sent you one of his engines after he "rebuilt" it? 😂 Reply
This Pentstar V6 Engine has more failures than its fair share. Unlike GM's vaunted 3.8 that began as a vibrating annoyance of the 1960s, becoming a quiet, reliable power thru 2009 , Stellantis shows little effort for such refinement of their engine. Reply
water down the intake can blow a rod like that..and a shop rag sucked into the intake can do it too 😎 Reply
probably rev the motor like crazy why it end up like that, the oil looks clean even the oil pan has no sludge Reply
😮 Did someone put a frag. grenade in that thing and pull the pin?? Holy blown engine Batman!!!🤯🤯😳😳 Reply
OBVIOUSLY, hydro-lock. THAT is operator error.
It was always going to be around for a goodtime not a long time was it not…
Hey man I'm a lil shirt on coin this week , think ya can patch this quick & cheap 🤔🤣
Just Needs oil!
Yep, blowing chunks is never good, no matter what.
Looks pretty standard for the brand
Little JB WELD WILL FIX IT
Hey Ray. Hope you’re not trying to muscle your way into our friend Eric’s ‘I do Cars’ territory. 😏
DAAAAAMB !
Oh oh oh i know what's wrong with it!!! It ain't got no gas!!!
A little Super Glue and your Midas Touch and it will be back on the road tomorrow. 😂😂😂
That right there is the definition of the word "catastrophic". It's actually impressive how it seems to have completely flown apart at high RPM.
thankfully pentastars come with a bunch of extra parts in the pan.
Hydro lock. Maybe a blown head gasket or drove through a deep puddle and sucked it through the intake.
Must be that pen star or whatever 3.9?
The way ppl drive its no wonder
I hate those engines with passion
Carnage…..kewl.
Why can’t they sue the gas station that allowed these chunks of aluminum to get into the engine?
That's either been hydro locked or pneumatic locked if Boosted and stuck closed blow off
Piston struck valve's r Hydro locked! The 3.6 is pretty reliable except valve train.
Did the rod just give up thhe ghost? Need to see the top of the piston.
Walter Percy Chrysler would crawl back into his grave if he came back and saw this.
The oh so lovely Pentastar. Lol
Is this I Do Cars?
Love both of those channel’s contents. You both have helped me learn a lot!
Just a flesh wound sir.
Rainman
RayRepairsRainman [I Do Cars] Repairs
39th! Hope you and the wife unit and family are having a fun weekend. Roger in Pierre South Dakota
Carnage. Maybe they added the oil after the failure…… after the Pep Boys oil change.
WELL…..There's your problem.
Ford Tech turned indy shop owner Immigration expert content creator sent you one of his engines after he "rebuilt" it? 😂
This Pentstar V6 Engine
has more failures than its fair share. Unlike GM's vaunted 3.8 that began as a vibrating annoyance of the 1960s, becoming a quiet, reliable power thru 2009 , Stellantis shows little effort for such refinement of their engine.
Don't be stepping on Eric's toes. This is I do cars thing.
WTH?
Probably a dropped intake valve and the engine got hot…
Oh, that's normal.
I DO CARS. 😀
Be careful that you don't do anything to upset Joe!
Error code P9999 connection rod too long
Just pour you a can of enjun restore from auto shack and your good! THAT'S RIGHT!
Case of metalfatigue
Timing issue?
aluminium 🤣
Well it's not like it's worthless. There is the money from the recycling.
By any chance did the owner put any C-4 in the engine? Or maybe a Claymore?😂
Are you trying to take over Erics channel?
Hot trash. Hydro locked.
water down the intake can blow a rod like that..and a shop rag sucked into the intake can do it too 😎
Yea. I had one in my shop the same way. The owner said "All I Want Is A OIL CHANGE!!🤬🤬🤬
Some jb weld and rtv, it’ll be better than new!
probably rev the motor like crazy why it end up like that, the oil looks clean even the oil pan has no sludge
All that brakeclean in the intake ports.🤣
So how big was that grenade??😮
Idk if flex tape can help with this one.
That is alot of damage.
And it all happened at idle
Uh oh Dave fixed it
Thought this was I do cars for a sec
Your going to need a lot of SUPER GLUE ,TO FIX THAT ONE😅😅
😮 Did someone put a frag. grenade in that thing and pull the pin?? Holy blown engine Batman!!!🤯🤯😳😳
That would appear to be a 3.6 pentastar. Looks like a P-303 code. Cylinder #3 misfire.
That's fine, all that's needed is a good engine flush!😅
Looks like a hydro lock block to me
Chrysler bad engineering