Finally after watching me do hundreds of brake jobs it is Hannah's turn to do her own, and she wanted to do it! So I told her to have at, and with a little guidance I think she did a pretty good job. In this video Hannah replaces the front pads and rotors on her 2007 Chevrolet Malibu. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store: https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a Paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the Paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store: https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a Paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the Paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair
Question, brass or steal wire brush for the rust cleaning?
You did an excellent job Hannah ! Keep up the great work !
Awesome kid..nice!!
Looks like she has been watching Rainman videos where she goes click every time instead of using a torque wrench
No rotor screws on Gm cars thats good my Honda/Acura vehicles use those Retaining screws. Those are annoying yeah they hold the rotor on there when the brake caliper is off but meh.
Nicely done! You’re absolutely correct Hannah. I can do it too. Replaced the front and rear brakes on my Chevy truck once before. I’ll be doing it once again and I’m feeling confident.
Great job Hannah. U are a great mechanic. U show up most men I know. Especially the NAVY guys I know. Yes that means u TERRY.
What's Hannah up to these days? Did she stay in the medical field?
Great job Hannah, you go girl! It is so great to see a young person like you take a hands on approach. I have two adult daughters that were raised with the same approach to life and has served them well. I am sure Mom and Dad are proud of you , God bless.
Great job young lady. Your father has taught you well, and you listened very well.
Very impressive indeed. Somebody was paying close attention.
You taught her well, Obie Wan…… Nothing's going to stop that young lady in life. Well, done!
I am 60 years old and have never done my own brakes because no one showed me how and I was afraid of messing them up. I am confident you will always do your own brakes and I am jealous. Keep on learning and tackle even more difficult repairs. Great job.
People loose their freaking marbles when you don't Crack the bleeder when you push the brake piston in, been doing it myself the same way no bleeder (often sized and will cause more issues) for many moons, abs yet to go bad on any car….
Great job Hannah
Beautiful, I want to show my daughters how to do it themselves.
Awesome job loved it. I can see it now Eric not feeling well today so Hannah will sub in
The old saying says<"The nut never falls far from the tree". I'll give these parents a ten.
My brakeclean cans don't have sound effects…
Eric and Mrs O your daughter is a credit to you and your family
When's Mrs O getting her own channel Mr O?
This is way too cool! I really dig this channel! And I'm really proud of the young lady, she was not afraid to get her hands dirty, she's tougher than me, because I have to wear gloves so I don't get my hands dirty 😁 I like the fact that she's interested in automotive repair, it's a great field to be in, I've been wrenching for over 30 years now myself, and still love it. Much encouragement and respect to her.
Hannah you did a great job!! Keep it up and looking forward to your next video!😃
Click! 😆😆🤣🤣
Great job, Miss Hannah!!
Coolest thing ever, good job.
This is super cool. Our children watch what we do. And if we do it right, they will learn, and will want others to see what they are capable of. I am very grateful my Dad took the time to teach me these kinds of things. Great job, Hannah..and Dad!!
hilarious and adorable, good job 3 years ago Hannah.
Hannah, where is your Jeep cap?
She almost sounded like Eric and even got the brake cleaner right too.
Every time there’s an SMA video on brakes, I get giddy with excitement for the inevitable brake cleaner sting! Love you all!
That's the way a brake job should be done, attention to details. She was taught by the best ! Great job Hannah and Mr. O
I am new to the channel. Who are Hannah and Marie? Are they related to the family or something? I'm confused.
Love the vids and the content. Wish we had a good mechanic like this in Florida.
Hannah closing with the classic "If I can do it, you can do it" makes this an excellent motivational clip… I intend to show this to my granddaughter as soon as she can identify a wrench.
Been watching a lot of this channel and you did a pretty good job. A couple of things you didn't do right though. You used your turn signals and seat belt while test driving. We'll forgive this error though.
great job
I guess I'll have to start buying that brand of brake cleaner…. Mine don't make that sound 🙁
The next generation I love it great job
Very nice job Hanna
Awesome… Somebody has been paying attention in class… Working next to Eric O. you are going to pick up a lot of good habits and the correct way of doing things… A+, Hannah!!!
How do I check the atf on a 2006 Chevy Malibu
Good Job Bill N LINY
She taking over or u giving up
She handles the impact wrench way better than me. Great work!
That was a rather unenthusiastic "click" on those last two caliper bolts. You might want to check the torque on those.
No jeep hat? Cmon
brake kleen
Eric, you the man. Give this young lady a chance to show what she has learned from the master. Every tool has a hammer side. Precious. Hannah you the lady!
hannah is awesome, great job
PLEASE READ BEFORE YOU COMMENT: Anyone leaving derogatory, deprecatory, disrespectful, demeaning, suggestive or sexually explicit comments will be permanently banned from the SMA channel, reported to YouTube and all comments removed. Yes she is a female, we all know this. She is also a minor so think with your big head, not you little one…