In this video we have a look at 2004 GMC 1500 5.3 that came in with a customer complaint of "no four wheel drive." The shop said it has a code C0327 "Encoder Circuit Malfunction" stored in it. They also said that the encoder motor was replaced along with the transfer case AND the vehicle had been taken to the dealer in an attempt to repair it. They gave up so now it's our turn. -Enjoy!
Bosch Tech 2: https://www.boschdiagnostics.com/pro/products/tech-2-pro-optima
OTC 700A 70 Amp Power Supply/Battery Charger: http://amzn.to/2ChakLk
Diagrams Used In This Video: https://drive.google.com/drive/folders/15tpLEL61R4ozQwcJvpEYBmLOLQd0D2kA?usp=sharing
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store: https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a Paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the Paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair

49 thoughts on “Chevy truck: no 4 wheel drive w/ code c0327”
  1. Avataaar/Circle Created with python_avatars JJ Ruggles says:

    Does anyone still have the schematic used on this video? I have a similar problem and the link don't work anymore.

  2. Avataaar/Circle Created with python_avatars Meicken84 says:

    I wanna see the fix lol

  3. Avataaar/Circle Created with python_avatars David D'Amico says:

    Which is also a good thing cuz my mechanic trying to rip me off $800 to change the motor and it might just be a wire so I'll go through and check it all myself

  4. Avataaar/Circle Created with python_avatars David D'Amico says:

    It was kind of slow but you're throwing it telling me what I may have to be as thorough As You Are

  5. Avataaar/Circle Created with python_avatars Les Walker says:

    Look like a good job to me

  6. Avataaar/Circle Created with python_avatars 77 Zrod says:

    I can not belive a dealer didnt find this.

  7. Avataaar/Circle Created with python_avatars Coy Carlson says:

    Stupid cars 🤨😊👍✌️

  8. Avataaar/Circle Created with python_avatars Coy Carlson says:

    Simple visual inspection can sometimes lead one right to the problem – especially if one finds a rats nest 🧐😳🤨. Makes me have to wonder , did the dealer even make any checks of fuses ? , or just ship the truck over to your shop for repair. 🤔🤨

  9. Avataaar/Circle Created with python_avatars Last King says:

    I can't thank you enough man, you did great job.

  10. Avataaar/Circle Created with python_avatars BreitbachTheGerman says:

    I was quoted from a parts store wanting a core charge for a TCCM

  11. Avataaar/Circle Created with python_avatars Wayne Allen says:

    2000 Chevy, same problem. Rat chewed same wire, same location. Watching his video saved be a lot of time.

  12. Avataaar/Circle Created with python_avatars Zeeke Bagley says:

    I love this video I'm sitting here with the stuff he knows sinus infection and trying to figure out why God damn thing won't come out of love for love but anyway video didn't help my problem none but I always enjoy your videos

  13. Avataaar/Circle Created with python_avatars Tim Sparks says:

    Fixed our problem thanks man

  14. Avataaar/Circle Created with python_avatars J B W says:

    Hello Eric, Glad u found the issue. NP8 should use doc id 770220. I could be wrong but I think you were using 769868 for the NP1 transfer case.
    I was following along and have a similar code and issue and built mine as a NP2 case and found 770220 . My application is a 2002 Silverado 4wd NP8 Option. Hope you are feeling better.

  15. Avataaar/Circle Created with python_avatars Jose Liberato says:

    Good buddy tanks💡☘

  16. Avataaar/Circle Created with python_avatars R theprizeisright says:

    I take it Mrs. O wasn't in the shop when you did this 1, lol And those strippers (wire) are terrible the 1st set.

  17. Avataaar/Circle Created with python_avatars Gord Currie says:

    Fantastic Job detecting the problem! All the best to your Health.

  18. Avataaar/Circle Created with python_avatars Troy Omstead says:

    Damn awesome video. I’m working on my 2008 2500hd at the moment. Just changed transfer case and running into same issue. Already changed out the tccm and tried to do the learn but to no avail.

  19. Avataaar/Circle Created with python_avatars Jeff Brisson says:

    Nice, very good analysis, all ya need now is a Fluke!!

  20. Avataaar/Circle Created with python_avatars Stephen Naccari says:

    Where do you buy a connectus from

  21. Avataaar/Circle Created with python_avatars Bill Mudd says:

    Love that you used the tech 2! Dealer scan tool. It does have the interface of an old Atari system. But in the right hands, it does work.

  22. Avataaar/Circle Created with python_avatars meballsac says:

    Went through changing a few parts and then came across this video. Didn't find a nest but found a crammed wire pinched in half by the cover. Cut, soldered, heat tubed and got my 4wd back! Awesome brother!!

  23. Avataaar/Circle Created with python_avatars Jeremy Finn says:

    Brother…I've been trying to hunt this down for probably 24 months. I haven't found any threads in forums covering how to isolate the wiring, everything just says replace the encoder motor, test the switch at the dash, etc, etc, etc. My issue turned out to be the EXACT same thing, so lucky-ish for me, but man, I just didn't know where to look for those wires at the connector next to the fuse block. I will definitely be donating soon. Thank you so much, and even on a day when you don't feel good at all, you were able to provide something that has made me VERY grateful. thank you thank you thank you. I hope you are getting everything you need in life. Love this, love you, keep up the legit work.

  24. Avataaar/Circle Created with python_avatars John Vrba says:

    Nice… dealership probably charged an arm n leg without fixing it.

  25. Avataaar/Circle Created with python_avatars Brian Goldsmith says:

    It's funny, You work on GM's constantly and wear a jeep hat. I have a yard full of both myself and have most of the same issues with the GM's. True blue on the dealers (God bless em). Great videos!!

  26. Avataaar/Circle Created with python_avatars John P Gorden Sr says:

    Even under the weather you do a hell of a job keep up the good work love your videos

  27. Avataaar/Circle Created with python_avatars ChineeyMark_BxNY says:

    Can you share the diagrams again?

  28. Avataaar/Circle Created with python_avatars Jeffrey Battousai Strader says:

    <- – – – – in his echoing stadium voice…….."CHHEEVVVYYYY TTHHUUNNNDDDEEERRRRR – ERR – ERR – ERRRRR!!

  29. Avataaar/Circle Created with python_avatars Darrell Benally says:

    I have a problem on a 2005 Chevy Tahoe it does crank but it will not turn on do you know any other problems

  30. Avataaar/Circle Created with python_avatars John E. Carr says:

    A great video.

  31. Avataaar/Circle Created with python_avatars Lee Fisher says:

    I would have took hey shopvac and sucked all of that out I hate rats

  32. Avataaar/Circle Created with python_avatars RsToEvo says:

    thank you for the inf and hope you feel better and thank you

  33. Avataaar/Circle Created with python_avatars RsToEvo says:

    did you get a chance to upload the wire diagram please i need a copy for my 2003 Chevy Avalanche

  34. Avataaar/Circle Created with python_avatars Andrew Higdon says:

    Again, awesome, awesome, awesome!

  35. Avataaar/Circle Created with python_avatars Richard Simons says:

    Wow! Great video, thanks so much! I'm willing to bet I'll find something similar to this on my Suburban when I look at it again tonight. It sat without being driven for 19 months and there is evidence that mice have visited. All of the 4WD button lights are on along with the CHECK 4WD message. I wouldn't be surprised to find a similar pile of mouse mulch in the same area.

  36. Avataaar/Circle Created with python_avatars Michael Nicholson says:

    Used to have my own repair shop years ago, had a customer come in with a Cadillac cts with electrical issues , while diagnosing removed two full plastic grocery store bags of mouse nesting material. After repairing a multitude of chewed up wiring , she informed me that she couldn't possibly have mouse damage because she lived in an upscale neighborhood !

  37. Avataaar/Circle Created with python_avatars d solo says:

    dude your zip ties were pointed in the wrong direction. What the hell. thats not a Ford

  38. Avataaar/Circle Created with python_avatars Mike Robbins says:

    👍👍👍👍👍

  39. Avataaar/Circle Created with python_avatars young dro says:

    Your the #%*?ing. man Thank you for sharing and caring

  40. Avataaar/Circle Created with python_avatars Gerald Antos says:

    Get well soon….sinus infections are a bear…

  41. Avataaar/Circle Created with python_avatars flyboy 2610 says:

    I really wish I had a scan tool that could do all those diagnostic tests! Maybe someday… In the meantime I'm fortunate that here in Lincoln, Ne. there is a good automotive electrical shop that can do all that stuff. Good job finding that wire! I've had sinus infections before, no fun AT ALL!!

  42. Avataaar/Circle Created with python_avatars Wendal Coe says:

    It's great to see someone that actually knows what he is doing! I refer to his video's a lot for information and suggestions.

  43. Avataaar/Circle Created with python_avatars Red Camaro says:

    Great video i have tested everthing someone unplugged the decoder motor years ago i plugged it in it killed the battery within minutes i think the rats have been wiring this truck too got to check tomorrow

  44. Avataaar/Circle Created with python_avatars Stephen James says:

    Im buying a 1999 chevy z71 4×4 and the transfer case is stuck in neutral was told it was transfer case but I've seen that the encoder motor on the transfer case could also be bad I'm at a loss any help would be great thank you!

  45. Avataaar/Circle Created with python_avatars Isaac Dillon says:

    It blows my mind they didn't notice the rats nest under the fuse box. My first thing to do with electrical is to test fuses

  46. Avataaar/Circle Created with python_avatars luke codere says:

    Thank you for these videos I own a 01 Sierra and you’ve helped me out a lot ! Respect for taking your time to make this video while you’re sick and still doing your everyday job to pay bills. Much appreciated 🙏

  47. Avataaar/Circle Created with python_avatars robert Last says:

    dude i wish you were close you would be my go to guy

  48. Avataaar/Circle Created with python_avatars Kenneth Franklin says:

    I want to go get a shop vac so bad…

  49. Avataaar/Circle Created with python_avatars Griff the Drummer says:

    You should have gotten one of your helpers to vacuum that out. That's the least they could do when you fix their cars for free !!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.