Lets see if the new Astro 4980 Air Hammer is as "Bad" as they say it is. We'll see if is up for the challenge of replacing ball joints in this 2002 Ford Explorer Sport Trac 4x4!
Want "BIG Nasty" For your own box: http://astore.amazon.com/httpswwwy0837-20/detail/B01C2RTJZK'>http://astore.amazon.com/httpswwwy0837-20/detail/B01C2RTJZK
Don't forget the hammer bit: http://astore.amazon.com/httpswwwy0837-20/detail/B013OT20Y2'>http://astore.amazon.com/httpswwwy0837-20/detail/B013OT20Y2
Oh and the quick chuck: http://astore.amazon.com/httpswwwy0837-20/detail/B007QV94JO'>http://astore.amazon.com/httpswwwy0837-20/detail/B007QV94JO
Other Astro Air tools used in this vid: http://astore.amazon.com/httpswwwy0837-20?_encoding=UTF8&node=2'>http://astore.amazon.com/httpswwwy0837-20?_encoding=UTF8&node=2
Astro's Ball Joint press kit I used in the vid:http://astore.amazon.com/httpswwwy0837-20/detail/B00061SGZO'>http://astore.amazon.com/httpswwwy0837-20/detail/B00061SGZO
Couldn't find the MOOG Bulletin? : http://www.moogparts.com/content/dam/marketing/North-America/moog/pdf/problemsolver/english/MOOG_PS_Bulletin_29009_K8695T006_En.pdf
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the **ALL NEW** SMA A-Store and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.
Want "BIG Nasty" For your own box: http://astore.amazon.com/httpswwwy0837-20/detail/B01C2RTJZK'>http://astore.amazon.com/httpswwwy0837-20/detail/B01C2RTJZK
Don't forget the hammer bit: http://astore.amazon.com/httpswwwy0837-20/detail/B013OT20Y2'>http://astore.amazon.com/httpswwwy0837-20/detail/B013OT20Y2
Oh and the quick chuck: http://astore.amazon.com/httpswwwy0837-20/detail/B007QV94JO'>http://astore.amazon.com/httpswwwy0837-20/detail/B007QV94JO
Other Astro Air tools used in this vid: http://astore.amazon.com/httpswwwy0837-20?_encoding=UTF8&node=2'>http://astore.amazon.com/httpswwwy0837-20?_encoding=UTF8&node=2
Astro's Ball Joint press kit I used in the vid:http://astore.amazon.com/httpswwwy0837-20/detail/B00061SGZO'>http://astore.amazon.com/httpswwwy0837-20/detail/B00061SGZO
Couldn't find the MOOG Bulletin? : http://www.moogparts.com/content/dam/marketing/North-America/moog/pdf/problemsolver/english/MOOG_PS_Bulletin_29009_K8695T006_En.pdf
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the **ALL NEW** SMA A-Store and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.
Yea those rubber caps are crap, very brittle especially if its cold outside..they should supply us with urethane bushings for the price they charge for there crap
Ive used them on several occasions and haven't had any issues so far..good product
Hi Eric. New subscriber and loving your videos and the tools. However; none of the links work. Is your SMA store no longer up?
Now tell them why the caster on both sides is never equal Eric.
Don't forget the axle nut
How is the trigger control on BIG NASTY?
for that boot that MOOG says you just put it on. What i do on some of the hard ones i take a cone from my ball joint press and i hook up the ball joint press like i was going to press in a ball joint and i tighten the shaft with my hand. And when it has a couple pounds of pressure i wiggle the shaft and tighten the shaft by hand and the boot will go right on . I've been doing the ones that give me trouble like that for about 28 years. it works pretty good .
My husband bought me this for my birthday with a huge dildo attachment. It's just like creepy uncle Joe biden ass fucking me out of every penny I got….
Where’s your hearing protection and safety glasses?
What air compressor do you use
Love your small 3/8 air gun so powerful.
Small and easy use. Lightweight.
Eric, I've been fixing shit 28 years. Had a honda civic in for a no start. Low compression on 3 cylinders. In a brain fart moment put oil in three cylinders for a wet compression. Durrrrr. Fresh oil all over my neck computer's and fresh painted walls.
The birth of "Big Nasty" classic.
How can I pass up a video that has a Big Nasty tool in it
The little impact wrench. "The little guy"
Awesome vedio Big Nasty sure was tuff ima get me one of those.
The premier of Big Nasty 😀
So I’m guessing that you can use an air hammer to remove a ball joint but it’s not recommended for installation
Meticulous!
Lol this video was just in my recommendation! All these years later, somewhat of a YouTube legend 😎
I've got to tell you Eric, because of watching your videos, my collection of Astro tools has grown considerably! When you consider the cost vs the quality and performance, Astro tools are impossible to beat!
With all that rust and dust in the air, he'll never suffer from iron deficiency.
GLASSES -SAFETY
Suddenly became conscious of the fact a torsion bar can't snap and puncture a tire like a McPherson coil could.
But if it happens it is rare. There is no right way, I guess.
Put a little lube on it…
Great video.
try to move your hand out of the way {showing set-up}
would appriciate( more detial) ,appreciate the help patrickallen85@yahoo
What air pressure do you run on your tools?
Come on now that hugh shop dont have more work work tables,
Yeah I haven't figured how to review a tool used in theory to me either you use it or dont and most repairs I seen you perform here their actual repairs nothing theoretical involved that I've seen.thus far.
Yep those new moog ball joints had me going when I first got them for the jeep and yes I called when I unboxed them because they looked like something was missing in fact it was fine it was just built differently than they where. But once I got them mounted and fully installed they were awesome
Big nasty seems to work well. I have the snap- on Super duty at a cost of 300.00 that I love, they sure do the job. This video is from 2016, Is it still holding up and working good? As for the comments welding the ball joint. I have actually seen that a few times now of them welded in. Personally, I am too particular to even consider that as I take no short cuts, If it's not right, replace it. When Moog came out with the oversize ball joints that was a real blessing.
I need one!!! This ball joint on 2011 Chrysler 300 is a pain
A trick I have used in the past to put the rubber boots on is find a ball joint press sleeve that fits on the boot and then gently drive it on
New subscriber. I really like your style and the video.I'm going to attempt this on my son's 96 Explorer.I'm 70 so I'm a little hesitant but we'll see how it goes. Thanks
Your right a broken rubber ain't good for nothing…lol
You da man Eric..
its amazing how grease will take the slack from a balljoint lol
If there wasn’t so much dirt and grease in that upper ball joint to absorb the shock, it might have popped quicker.
I love it THERES YOUR PROBLEM LADY
Big Nasty is actually a 5X rivet gun designed for use in aerospace. There are also 7X and 9X which have longer barrels. The main difference between a rivet gun and a muffler removal gun is that rivet guns are supposed to have a fine tease trigger to slowly go from tap…tap…tap…to faster and faster. This helps the riveter stay controllable and on the head of the rivet you are bucking. The internals are completely different as well. Chicago Pneumatic were the early makers, but now, most if not all are made in China, bringing the price down to an affordable level. I have a 3X on the side of my work bench to help drive out pins, or whatever needs hitting. It's like having a one-handed hammer and punch setup.
My goes want to knowwhere to purchase big and nasty
"and the cotter pin comes out in pieces" no point in wasting time taking it out, you don't want to re-use it anyway.
Thank you for showing your tools. I've got a chubby now. I spent 16 hours changing my control arms on my 2009 Camry on Saturday. Used my relatively new DeWalt 20V cordless impact wrenches (3/8" and 1/2"), LED light and grinder (cut-off tool). It was going smoothly when I got to the second (passenger side) control arm, I was unable to break the castle nut on the ball joint. Ended up having to cut it off. Figures. No room to use the breaker bar (1/2" drive) or my impact wrenches. My breaker pipe was not big enough for the boxed end wrench. So cut off was necessary. Did not have a powered ratchet. Not sure if that would have broke that nut. Anyways, still felt empowered to do it myself. Sure wish that nut would have broken free. It was my first time doing this. I had to remove the engine mounts to access the mounting bolts for the control arms. That's what made it the bitch of a project that it was. First time doing that as well. Love your channel!
Sept 2020 ….. watching your videos for days since discovering them …… I'll be a qualified mechanic before christmas
Any mechanic out there use a cordless rotary hammer drill as a substitute for "big nasty'? I'm just a home DIYer with no cordless tools. Wondering if I should take out my hammer drill and try it sometimes on a stuck rotor.
l think you are one of the best mechanics, l like the way you work.
Maybe you should use the Big Nasty on the links the vibration knocks them loose all the time ol school trick just saying great channel by the way!!!