Pretty ordinary drama free water pump replacement here. But hey I didn't forget the brake clean ๐ So stick around and see what it take to change out the water pump and thermostat on this 2002 GMC 2500HD equipped with the fuel efficient 6.0 liter.
Want hose clamp pliers like the ones I used in the video? Check out the new SMA A-Store: http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN SMA STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.
Want hose clamp pliers like the ones I used in the video? Check out the new SMA A-Store: http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN SMA STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.
Nicely done ! I missed why it was leaking in the first place. pump cracked ? weeping at gasket ? My 6.0 has about three drips a day from that area. cheers.
What temp stat do yโall use?
Can you use the 1 piece thermostat and housing or the 2 seperate piece housing and thermostat?
Do we no longer use Permatex gasket sealer?
Have you ever had these water pumps whine and sound like an alternator? I am chasing an annoying one.
What is the yellow piece that you're using in the air tool to help clean up the surfaces along with your scraper tool? No need to put ANY rtv on the gaskets at all, including the metal type? I've had a fuck of a time getting mine to seal properly. Thanks for the video and hope to hear from you soon!
now that was smart taking the tire off…will have to remember that next time working on my super duty..thanks
Super helpful video, found out exactly where that weep hole is and how to take those pins out of fan shroud, might even take up tip on using that lower hose for drain instead of messing with radiator… Thanks for the pro tips!
Helpfull! I figured it was not too tough and video is faster than reading the service manual.
My buddy showed me a long time ago about pulling tires off. We even use old steel wheels with no tires for long term projects so you can roll them if needed.
Did my diesal injectors this summer. Built over top creeper for that project it's perrty handy to .
thank you for this video, very helpful.
What kinda scraper did you use Bud? I cannot find a good one anywhere. Thanks ๐ค
Wanted to see what it entailed. Should be an easy fix for me. Thanks for the video.
Every time a water pump pulley chimes. . . . an angel gets his ________
Any issue getting the air of of these systems? I just drained and flushed by 2015 1500HD 6.0L and I canโt get the lower radiator hose to warm up. The temp gauge shows normal and the upper radiator hose gets warm, but the lower hose stays cold. The hose to the coolant tank gets warm also, but it seems the t-stat isnโt opening. It seems odd it would stick at this point in time, unless it has been that way and I just didnโt know it. Seems though that the truck would overheat and that has never happened. However, I just drove the truck 15 miles and the lower radiator hose going to the t-stat housing was still stone cold. Very odd.
Nice work
Why is one click on our torque wrenches not enough? Ido the same thing, tighten all down until it clicks , then go back through for a second pass just double checking. Does everyone else do that too? Or just us with OCD?
I always just let the air out of the tires by removing the valve core. Im 5'8" so I did it alot.
Why I just got the recommendation for this channel I will never know, but glad I found it. Great content!
I like the puppy
Any thoughts using a temporary pressure cap with a tap for adding air on the coolant reservoir just after filling to check for leaks under pressure?
6.0 is the best small block chevy ever made
Thanks.
I got an old screwdriver that I ground to a blunt point and bent into a hook. Makes pulling the stuck hoses easy.
Thanks again. I've changed other vehicle's but nice to see a pro do a particular vehicle first, makes you feel like you done it before. I got prices ranging from 575 to a thousand to have it done. Parts were under 200 including the fan clutch holder. There was room for a big crescent wrench but you need the clutch holding tool. I just stood on a hf folding step platform. Not bad at all. Hardest part was pulling those plastic clips on the radiator shroud.
This was an excellent how to. Great job.
THANK YOU LOT OF HELP GOING REPLACE MINE
LOL good thinking (tires off no leaning) I dont like doing it at the best of times.
So earlier today I watched this video, and didnโt realize that I would need any kind of specialty tool. I went online and found various kits, mostly just the wrench, and even then, they generally werenโt in stock. By this time it was 5:10 pm, a d I knew I had to rush if I was gonna catch the only place that seemed to have the pulley holder, and of course I read all kinds of makeshift rigs to get by if needed. Iโm really good at breaking parts so i was trying to do the right thing and use the right tool, the whole deal. Got the anti-seize, blue RTV, hose removal tool (which was totally worth it. So simple, so effective), the red kool-aid coolant, and was ready to do the deed on my 2006 Suburban Z71. So I was having trouble sourcing the actual pulley holder tool, so I went to go look and was gonna check to see if my big crescent wrench would work instead of a 36mm wrench. I pop the hood, and this has been my parentโs since new, mind you, itโs got almost 180,000 miles, and is in great shape. So this whole fam clutch removal issue has soaked up over an hour, and now I realize with some shock, that there is no clutch fan at all! Just two electric fans. And the new pump I got with the optional preinstalled thermostat. So since there was no need to remove the shallower fan shroud, and no clutch fan to remove. I couldnโt believe how easy it was, I kept thinking I was being pranked. Remove air breather plenum- two 8mm band clamps, minimal tugging to remove the whole airbox apparatus. Then one large and two small hose clamps. The type on the bigger hose was a royal pain if you donโt have the right tool, and apparently those too are make believe since no one at any of the stores could help. I spent an hour on just that type of hose clamp while replacing a radiator on a Milan. If you get it right though, they click into an open position, and slip right off. And again, I spent more time on that one hose clamp replacement than the whole rest of the procedure. Thermostat was preinstalled, and South Main โbolts in place to hold he gaskets in placeโ trick worked great. Minimal old gasket to scrape. Hood up to hood down was about 90 minutes, with pretty laid back pace and just a little trouble figuring out the serpentine belt route, even though I took pictures. I still feel guilty because it was so easy, since I didnโt have to remove the shroud or the fan. Three hose clamps, six bolts, pop or scrape, the old gaskets off the block, put bolts in water pump, antiseize the bolt tips, slip it in, finger tight the bolts, torque to whatever, 30ish ft/lbs, replace hose clamps, curse the bigger one for fifteen minutes, replace air box, :top off coolant. Oh, and a big concrete mixing type black plastic tub caught all if the coolant , no mess at all. Burp radiator.done.
Love the video. No Gasket Maker on the gaskets Huh? Yeah, I own a 2001 Jimmy 4.3 and I did the pump, hoses, thermo, radiator, heater core, and belt. I flushed and put in the green stuff. I don't trust dexcool. Had to change head gaskets on a 1999 Blazer because of that stuff. I've owned 3 different 4.3L. I like GM.
โProbably a million videos showing how to change a 6.0 water pump โ. Yeah, but I sought out this one. And it all started more than a year ago with the Fusion/Milan vibration which turned out to be the transmission mount. Aces. All day long. Aces.
Love your videos dude makes everything so easy thankyou
Have a 1997 chevy with a 303 misfire code changed wires plugs cap rotor coil cant figure it out
Sheeba says "Nooooo" to Chevrolet!
Thanks
Thanks for the step by step. Starting on my 4.8L tomorrow.
Those metal gaskets with the o-rings are junk. Even the OEM ones. 05 Tahoe, 5.3 and could never get them to stop leaking … until I used the paper gaskets.
I would advise to check or replace the belt tensioner and idler pulley as they got out.
No need to use gasket sealer?
Hey man I just watch your video on how to change water pump I change my water pump on my 04 chevy tahoe about six or seven months ago and now it's leaking again could it be parts issue I pick up water pump from autozone
Gates sends the metal gaskets too
Stop telling me how boring it is to watch
Lol as soon as I see the lift up I knew you were doing what I used to do. I had always used my 18 inch crescent wrench and a screw driver
Eric o its alwyas exciting watch and learning from you man come on man
Just wondering what noises you hear when the water pump is going bad Eric?
universal coolant. dex cool sucks. solves all coolant issues. yes, I know this is an old video
I watched your video about three times. I have an 01 chevy 2500hd. Had the engine replaced about 60,000 miles because of the piston slap issue. I have 210,000 miles on it and replaced the water pump today. Not as fast, but took me about 4 hours, including a trip to the store.