Well this fix was pretty straight forward on this old 2006 Pontiac G6. It has a code P0449 Evaprative Emissions (EVAP) vent solenoid control circuit. This is a pretty common problem with theses cars and many other GM products. The test procedure is very standard. Hope you enjoy!
Want an SMA STICKER!?!
Simply send and E-mail to SMAstickers @outlook.com, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!
--Eric O.
Feel like sending some swag to SMA but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

49 thoughts on “Repair: pontiac g6 engine light p0449”
  1. Avataaar/Circle Created with python_avatars JoeyLovesTrains says:

    Ok, do you think this might possibly be a fox for P0455? I remember it clicking, and the second it clicked the P0455 (large evap leak) popped up. I think it might be clogged with sand or something

  2. Avataaar/Circle Created with python_avatars Aaron says:

    I have a p0446 and heard a whining nose whenever I accelerate. 2007 g6 gt. Think it might be evap hose?

  3. Avataaar/Circle Created with python_avatars NO RELATION says:

    I'm going to attempt this on the ground with a few fuck yous and a son of a bitch I should be half way done

  4. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Good easy Repair Eric O pretty night Space for the Vent solenoid @SouthMainAutoRepairLLC

  5. Avataaar/Circle Created with python_avatars Carlos Aguilaralba says:

    No hay modo de tra ducirlo en espaรฑol

  6. Avataaar/Circle Created with python_avatars Pete Bachelder says:

    Thanks so much for this video!! I have the exact same car (Pontiac G6) and had a vague idea where this vent valve was.
    Now I know where and how to get this tricky part off my car, and put the new one on! My tank straps are just as rusty, hope they hold together
    during this process so I can put it all back together.
    Awesome video !!

  7. Avataaar/Circle Created with python_avatars Deborah hallett says:

    I literally just did that same job on a 07 Malibu,the only difference was I had to undo the fuel filler hose to get it down far enough and I tested it for continuity before I put it up in took me a long time,but got it done!thanks to you!

  8. Avataaar/Circle Created with python_avatars Billy says:

    Great video bro definitely helps quick question whatโ€™s the name of those pliers That you said in the beginning of the video that you use for taking hoses off? Thanks bro

  9. Avataaar/Circle Created with python_avatars Billy says:

    Hey Eric great info and video!! Eric let me ask Could it be accessed from up top if you cut an access door open under the seat?

  10. Avataaar/Circle Created with python_avatars pinacho1979@gmail.com pinacho says:

    Excelente viedo amigo ..you are the Man

  11. Avataaar/Circle Created with python_avatars Keith Dunn says:

    Great video! What issues were the vehicle having prior to replacement? Thank you

  12. Avataaar/Circle Created with python_avatars Oscar Rios says:

    I have a question for a08 G6 2.4.
    I already replaced my throttle body 3 times and still the rpm is still high at 4 rpm and disconnected and reconnected the accelerator position sensor on the pedal while motor running and rpm stayed at 4000 rpm … What should I check or look for????

  13. Avataaar/Circle Created with python_avatars Mephiston says:

    gosh, by this point the snap on tool is becoming a subscription service of 1300 every few months

  14. Avataaar/Circle Created with python_avatars CAPTAIN AMERICA says:

    how much did you charge to do that

  15. Avataaar/Circle Created with python_avatars bbaaspencer1 says:

    Tires?

  16. Avataaar/Circle Created with python_avatars Josh Stane says:

    For future reference, Iโ€™d advise clearing codes, driving the car for a hot minute (assuming itโ€™s safe, this one wasnโ€™t), then running codes again. You cleared codes than read the codes, of course there arenโ€™t going to be any codes lol

  17. Avataaar/Circle Created with python_avatars GASKET AUTO says:

    Nice part

  18. Avataaar/Circle Created with python_avatars LESTER PENA says:

    "HAA BIG DUMMY" That was priceless I loved it!! LMAO!!!

  19. Avataaar/Circle Created with python_avatars JoeyLovesTrains says:

    How do you remove the tank straps?? I see the front bolt, but I donโ€™t see the rear bolts

  20. Avataaar/Circle Created with python_avatars Edward Aiken says:

    Always enjoy watching your videos. Had to do the same thing to my daughter's G6 convertible. Ugh! No room at all. Hands look like I was in a cat fight…. thanks for your videos.

  21. Avataaar/Circle Created with python_avatars Jacob Downey says:

    Thank you Jerry, or whatever your name is, thank you for taking the time! You've helped Vroom-Vroom go zoom zoom again!

  22. Avataaar/Circle Created with python_avatars Ian Frost says:

    How much it cost for this job

  23. Avataaar/Circle Created with python_avatars Larry Fry says:

    The patience you exhibit is unbelievable. Decades ago, I did of lot of my own automotive repairs, even replacing a couple of engines, transmissions, etc. As I get older, I find I have less and less desire to go through the frustration of parts that are next-to-impossible to access, or even to get my hands dirty. I'm so thankful there are still guys like Eric to pick up the slack.

  24. Avataaar/Circle Created with python_avatars Charity says:

    What is the name of the part, so I can order it and or ask for it?

  25. Avataaar/Circle Created with python_avatars Richard Bambenek says:

    It would help to be a double jointed contortionist to work on today's cars

  26. Avataaar/Circle Created with python_avatars Tom Oakhill says:

    Tires? I don't need no stinkin tires!

  27. Avataaar/Circle Created with python_avatars Tom Oakhill says:

    AS a professor of computer science it amazes me that Eric O. has to tell the scan tool what car it is plugged into. This is the ultimate in stupidity. Clearly the ECM must know what it is controlling.

  28. Avataaar/Circle Created with python_avatars SOTO'S says:

    I have p0455 on my g6 I replaced the purge valve but still light comeback on, any advice

  29. Avataaar/Circle Created with python_avatars Steve Chase says:

    You sir saved me one heck of lot headache. Thank you Thank you Thank you for your patience and thorough video and description. This was a tough one for me but I got her done. Thanks to you

  30. Avataaar/Circle Created with python_avatars Russ Wentz says:

    Thank you for your time and experience. I can't afford to have my wife's Pontiac repaired and your video helps me to get through the procedure. Thank you, Thank you.

  31. Avataaar/Circle Created with python_avatars J Pol says:

    Hey Eric. A lot of us can't afford a scan tool that we have to send in for repair several times a year. Lol In future videos is there any way that you can show without using a scan tool or power probe the easiest optional method for activating things like solenoid vent valves, ac clutches, etc.? Or did I just over think this. A fused jumper from battery positive. (For 12v circuit) Right. How about 5v?Thanks Eric. Cash strapped and Always trying to work around needing more than just a code reader with live data, test light and meter. Tanks. Jpol.

  32. Avataaar/Circle Created with python_avatars spiralnapkin says:

    Thank you for this! I'm about to do the same thing on the same car.

  33. Avataaar/Circle Created with python_avatars George Gaspar says:

    How did you not get dirt in your eyes?

  34. Avataaar/Circle Created with python_avatars Laura Butler says:

    Why can't cars come standard with that??? Lol

  35. Avataaar/Circle Created with python_avatars Luis Echeverria says:

    I change that piece but still have the light on saying that that part is bad even though I put a new one any advice what could of be?

  36. Avataaar/Circle Created with python_avatars JimmyJokerstreamer702 says:

    I just swap it out check engine still on, this was freaking hard to swap out if u dont have some pliers similar to what u had, now gotta go back to autozone to see wth is wrong

  37. Avataaar/Circle Created with python_avatars Daniel Schulte says:

    Great video. Very descriptive.

  38. Avataaar/Circle Created with python_avatars Timothy Butler says:

    I just did this repair, and noticed there isn't even a top line connected??? Do I need to order the top hose, and where does it go to?

  39. Avataaar/Circle Created with python_avatars Mike Chiodetti says:

    Tight fit, but Great Video!

  40. Avataaar/Circle Created with python_avatars Jonathan Bryant says:

    You must live up north somewhere cause that car is eat up with salt or corrosion and I donโ€™t have all the fancy computer stuff so Iโ€™m screwed but thanks anyway you are very educational

  41. Avataaar/Circle Created with python_avatars Duncan Mac says:

    Do you have to pay Snap-On for the repairs every time it breaks down? A job well done, thanks for the video.

  42. Avataaar/Circle Created with python_avatars Brenton Mobley says:

    I did it a bit differently. Dropped the exhaust off the hangers had it held by a dead pole. Used a trans jack on the tank. Removed the filler neck to gain complete access. Oh. Also left the rear driver side bolt in the hanger for the gas tank, just move it out of the way. This was actually an easy job.

  43. Avataaar/Circle Created with python_avatars Fishing with Landon says:

    Hey there man I love ur video Iโ€™m looking for any help I can get my 2006 3.5 g6 is saying low engine power so it wonโ€™t even rev lights wonโ€™t come on Iโ€™m just wondering whatโ€™s my best option to find out the cause Iโ€™ve read a lil it could be the sensor on the pedal or a faulty wire any advice would be great thank you

  44. Avataaar/Circle Created with python_avatars Billyโ€™s Tricks & flicks says:

    Why not use your Power Probe and power up the solenoid from the connector. Pretty much has to be open after testing the harness though I guess huh? I was a California Smog tech and its reasons like this I quit doing it. Evaporate canisters have to be visually confirmed every inspection . What a crock of shit GM!

  45. Avataaar/Circle Created with python_avatars Billyโ€™s Tricks & flicks says:

    Looks like you got a hurricane flood car in your shop with all the flood corrosion

  46. Avataaar/Circle Created with python_avatars Khalid Jackson says:

    Hey. I got a similar code (P0442) and it also read as the EVAP. I bought the part and installed it but it was in the engine bay next to the throttle body. Ate there 2 EVAP solenoids on this car?

  47. Avataaar/Circle Created with python_avatars Alfred Dorsey says:

    SMAR very informative info

  48. Avataaar/Circle Created with python_avatars Tanker says:

    pull it off the clamp before disconnecting the hoses so you can pull it down and disconnect them easier, then reconnect the hoses first.

  49. Avataaar/Circle Created with python_avatars Gary mardirosian says:

    Great video. Your excellent teaching saved me about $500 . Working on the ground gives you different challenges. The rear gas tank straps were hard to get back on especially the drivers side. Thanks again.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.