It’s Finally Here!!! Gale Banks Monster 4” Exhaust LBZ DURAMAX 6.6 @Banks Power https://youtu.be/s5Jx_RjGjCQ
Visit my Second Channel on Youtube, RainmanRay Off Duty https://www.youtube.com/c/RainmanRayOutoftheShop
Follow on Twitter: @RainmanRay4Real
Check out Spicy Shorts on TikTok: www.tiktok.com/ @rainman_rays_repairs
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers! https://rainmanraysrepairs.myspreadshop.com/
Support the channel on Patreon: https://www.patreon.com/RainmanRaysRepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
ATD Tools 13782 10-Piece Triple Square Spline Bit Socket Set https://amzn.to/3RV2fUB
Same as Matco. Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 https://amzn.to/3OJTRp2
Mercedes BMW VW Wheel Stud Master Kit: https://amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! https://amzn.to/3IfDeOa
Brake Caliper Compressor: https://amzn.to/3gQBuiB
My Camera Gear:
Gopro Hero 10 https://amzn.to/3AaxELe
Gopro Hero 9 https://amzn.to/3EKDcM1
Hero 9&10 Dual Battery Charger MUST HAVE! https://amzn.to/3g5KdAT
Flexible Camera Mount https://amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”

Hello everybody! good day to you and good day to me this is the day that I've been waiting for I don't have any customers here today, but I do have my bank's exhaust system and uh in the shop. It was delivered yesterday last night when I got home and I'm super happy and now I'm going to take a day for me I'm gonna put my exhaust on my 2007 Chevrolet Silverado with 217 0.38 miles on the clock I'm gonna put it on my uh, my big rack the 12 000 pound rack. So I need to learn how to how to sweep that crazy angled corner to uh to get it lined up and and we're gonna see if we clear the air compressor that is next to the front door. Oh I see a cute little kid poking her head out. uh-huh she knows better I'm gonna have to close that uh that swinging door right there. I think I'm gonna make it. Yeah, we're gonna make it. I uh I insist I'm gonna do this one shot see how this works. Just gotta clear the wall in the door. All right, we're hard over to the left. we're gonna make it I Think we're going to make it better than last time. actually I'm too far over backing up. Check the camera, make sure there's no kid back there. Good, it's a kid-free Zone This is the most intense moment of pulling a vehicle in ever. Oh I'm running into the wall. yeah, awfully close it. I See it Wife unit? say hi hi I'm gonna run it over. Yeah thank you. Thanks. All right, it's working. I Do have a lot of space on the passenger side. That's good. Moving on in. All right. and I think right about here is good. All right. Parker Seattle Powering down the rack is set. Let's check this. Frame Flex I've got a uh, what is it a 90 gallons I've got 90 gallons of diesel in that tank. about 800 pounds or so plus the weight of the tank. Let's watch this thing. Flex I was talking to uh A-Rod with power stroke Tech Talk with Bayrod. uh last night and I told him about that. He couldn't believe it. Watch This Is it here? Hang on I'll let it down. You can see it again. Moving back up. Watch this. All right? That's enough fooling around. Let's uh, get this thing up in the air. We'll get the old exhaust off and the new exhaust on. Now there is something I Want to be clear about that. Banks Kit does not delete anything. There's no emissions delete stuff in that bank's exhaust. I Realize it's a scary time for diesels and it's a scary time to do anything. uh, regarding modifications to your diesel. But public disclaimer right now and everybody can go away with their fluting nonsense. I'm not removing any emissions components with that Bank's exhaust kit. Disclaimer over and let's set this down on the locks for safety very slowly. Escape Uh, no, that lock didn't work. that's not there. Hello, let's go down to the next one. Oh, not even is that it There we go, that's on the locks now. Okay now. I Feel better? Oh, that's a lot of weight flinging around up there. 9 000 pounds actually. All right. So I'm Gonna Save the tip and reuse this tip because that's actually pretty nice when it's clean. So we're gonna take this one off and keep that. uh, we're gonna lose all this piping right here. Uh, this Muffler goes away. and I've got piping all the way up here to this section so it looks like that's a band clamp. We're going to unbolt that. uh, we're gonna reuse these hangers right here. This one. this one. that one I can't see. there's my light, that one right there and uh, probably one more or two more in the back, so looks fairly straightforward. I may have to cut this off to get it over the axle. Maybe not. we'll see. I'll go ahead and unbolt everything first and then lose. Uh, lose the hangers and we'll go from there. Considering that this has never been removed in 217 000 miles, we're gonna spray some lube on there and I think there's another clamp? yeah, the one back here on the uh. on the tip. There we go. All right, let's go ahead and see how easily this is going to come apart. Loud noises? Okay, there's some more of that Alabama play and yeah, that's stuck on there. Pretty good. Okay, more loud noises. I'm gonna give this some linear impacts to see if we can't break the bond between uh, the tip and the pipe. Nothing crazy? Nope, not yet. Oh, it started to move. Okay, we're getting somewhere more. Lube I Think this is going to take a little longer than I had uh, originally guestimated. We'll see I do have a Sawzall after all. Oh I wonder I Have an idea. Let's see if I can rotate it with a band wrench if this is gonna fit. Yes, rarely use tool, but when you need it comes in handy and that's a negative. not turning fail. Yeah, it moved okay. I guess I just need to work this a little bit until it comes off your hair. it's moving. foreign. about a quarter of an inch. Ding fries are done. a half inch foreign noodle arm. All this for just the tip. What is this? Come on. yeah, we're moving now. and no, it's not denting the tip right here. It's good. Come on now. dang, he's wearing me out more. Lube that was a lot of Strokes Well, it's starting to dribble here. Hang on. All right back at it. Not yet. there we go. Yeah, oh, it's stuck I was wrong when I thought it was halfway there. That was very wrong. There we go. Come on. almost please. Oh no. as far as it's going, man, enough to make a whole video. just about my tip. that's uh, this is taking too long. Thank you thank you. Oh yeah, all right, got it. Okay, let's put this thing over here. we'll put that back on later. Wow. Taking a break All right. So for those uh, those rubber exhaust hangers there we go I have a tool for that. It pushes up against the rubber part and then it pushes it or pulls it rather off of the uh The Hanger portion that hangs out. You'll see. Check this out. There it is. there's the rear most hanger. I'm gonna give it a little bit of lubricant and this is kind of a larger one. I Hope this works. It presses that rubber hanger right and off. Look at that. No more pry bar There we go. Okay and we repeat. moving forward on the on the other hangers. get that one there. a little bit of lube. easy peasy, foreign I lied this one's uh, binding. there we go. I moved up to the front right here and I'm gonna loosen this clamp because uh as I take these hangers off, this thing should start to free itself and hopefully I can just wiggle it out without having to uh, hammer it or torch it or cut it or any other, uh, escalated levels of operation so to speak. Whoa. Gravity. Look at that caught it. Move through the Matrix In case you were wondering if there's an Amazon link for these wrenches down in this video's description. Okay, Hanger number three, lubricate it and this one, it's gonna. It's gonna drop down. The exhaust is gonna drop down once. I Pull this one off. There's already a good bit of tension on this. Take the weight on this side guys and it's coming down some. that's about right there. I'm out of order I put that rear clamp back on to hold the weight I need to remove the clamp that's above our heads real quick because it's starting to uh to stretch too far and I don't want to tear it I Also went back to that tailpipe and secured it with a bungee so this thing can't fall. I Don't want to tear any of these. uh, these hangers because I don't want to go buy more. These ones are still in good shape. Okay The Hanger on that. I Reinstalled all right. And now for the bungee cord. Okay, it's loose. Let's try to scooch it back and see if it won't disconnect and we're We're free. Gonna hit you guys in the head with an exhaust? No, Maybe. Yes. Hope you're okay. Now the instructions I Read them last night just uh briefly for for fun. Uh, they said I had to cut this off I don't think I do I think it just comes right out. Nice. There we go. Oh, that's a heavy right here. Actually, things okay, so it's all removed. Let's go ahead and start putting these sections in. I'm pretty sure I can figure out where they go. there's only four pieces, something like that. I'm just gonna get the hangers on and then we'll start getting pieces fit. I need a I need lubricant for the shaft actually I'll Lube the hole and then what come? what are you doing? It's not spraying. Oh no, there got it. It's dribbling on me there. It slides right in. Beautiful gravity, exhaust, gravity. all right. I've identified this piece with the slant cut to be the uh tailpipe. so let's just squeeze this one in right now and get this piece out of the way. Just slide this up into here and stick it in. it's a little hanger putting it in dry again. What am I thinking there? Wow, right in there. Okay, that's our that's tailpipe, that's in. Okay, we've got the next section slid into the tailpipe. Let's get some lube up here on our hanger. There we go. We'll connect the next section. None of these are straight, but once everything is kind of fitted together, we can. uh, we can maneuver things around and get them done. Get them straightened out. Words: Okay, let's try to get the uh. the muffler fit next. trying to see. Okay, it's got an inlet marking and an outlet marking. so we're coming up. This is the outlet side. slip that over our pipe. There we go and I'm trying to mate it to the other side. Bear with me. I know you guys can't see foreign together please. All right, break time. Okay, next piece, it's this little angle piece that makes meets the forward pipe tight squeeze. There we go and we go ahead and try to join this up with this next piece here. Maybe foreign? Yeah, there we go. Got it? That's pretty okay. So far so good. kind of all in place. All the pieces are there I'd seem to get them fit a little bit better and then we'll put the clamps on. There we go. Alrighty, So uh, after a lot of wiggling and maneuvering and tapping I think we're just about in position and everything, all the pipes have clearance. We're pointed the right way. This one needs to come. I think up a little bit, but I'll start from the front, work my way back. Actually I'm going to start from the middle because I have a uh, a clamp slash hanger right here and this is going to be my starting point. So let's get this hanger on. We'll make our first connection here, then we'll do the band clamps out front and then we'll move to the back, straighten out the tailpipe, and uh, that'll be that. We'll be done. Let's try it out. Okie dokes a little bit of Lube in there, again, some on the shaft. Perfect. This is going to go think like that or something like that. So go this way. um negative. Now let's just see I'm thinking thinking it goes like that and if I'm wrong, you guys will tell me in the comments there. another yeah. we'll give these a couple clicks to Snug it up. Nothing too permanent just yet while we're here. I'll put this clamp on here. Let's go ahead and disassemble this clamp. so I can. whoa Parts Gravity It's cool I See where it all went? No worries. Anyway, let's go ahead and get this guy on there. dude. I need a tool for that? No sense in stressing out the flanges. Whoa. That was cool. Two Nippex is to the rescue. There we go. Slide that on washer. I could have slid these on during uh assembly but I didn't So so there loud noises and again, I'm not going to wrench down on it until everything is lined up and confirmed. Foreign. So good. Got everything bolted in? Looks like we have clearance everywhere. That clamp's tight. that clamp started moving back a little bit. That one's secure. We have clearance. Yeah, that Hanger's taking some weight. Let's see that Hanger's got some weight and the only thing it's touching is the leaf spring right here. But that's no big deal because the axle is hanging and once the weight comes down, the spring is going to move up. and uh, that exhaust tip is gonna be free of obstructions and there won't be any rattles I think fingers crossed. Um so I got that tip that I spent all that effort on and it completely escaped me that the factory exhaust is a three inch and this one is a four inch. So I don't get to use my tip? yo? Yes, there is. Yeah, it is because I don't want it either. It has to go. That's the yeah, it's it's been decreed. I Talked to Uh, yeah, I talked to her about that. Oh perfect. Yeah, we're not allowed to store stuff up there I know. Perfect. That's where it goes. All right. See you man. Okay, um well since we can't use the tip, I'll uh, let's put that over here in inventory. I'll figure out something to do with that later. Um, well, not for the moment. I think I'm waiting for and I'm sure you guys are waiting for. Let's let this down and starting with the engine now. it's probably not gonna make the wooshy sound because I have to have the uh, the veins where I have to have the ECM tuned. So the veins in the turbo operate appropriately to produce that sound. but it still should make some nice but uh, well. let's get it on the ground. find out. screen subscribe button. we're gonna come off the locks and we're gonna bring her down. Silverado Coming down slowly. No, all right, let's see a contact. All right. All right, let's see what we get. starting is the engine I Like it. Okay, that's pretty cool. It's not horribly loud and uh, it's got a little bit of tone to it that's perfect. See what I say yesterday? I Gotta keep it classy. Okay, not obnoxious classy. but I will get this thing tuned a little bit and we're gonna have that nice whistle that throaty transition into a whistle sound I do want that? Let's go ahead and restart this and I'll check it for some leaks. Moving back up. Thank you! Okay listening for leaks grinding you guys feeling for leaks? Negative: Check over here negative and what's called? Yeah, that's pretty good too. There's a little bit of a leak there I don't like this clamp. I'm going to get a larger one that's a that's not really working. it's pinching the pipe a little bit, but I can live with that one for now. All right, let's get out of here. Okay, let's back this Beast out. and uh, take for a test drive side squeeze. but that's okay. it's like maneuvering the Titanic but hey, if I can fit this thing in here, I can fit probably anything that's a pickup anyway and a little forward and to the right, we'll wake up the backup camera here we go looking good, we're clearing the door hard over and we are out of here. All right here we go. put the windows down so we can hear it. The exhaust notes nice I Like it, not too much, but you can tell it's a little throaty. Sure, Happy Birthday three months too late for me. All right, all right guys, it's gonna bring this one to a uh Swift Conclusion: I'm gonna head down, drive a little bit more, swing back to the shop. just uh, recheck it one more times for one more time for leaks and clearances and now we'll be good to go. So uh, that being said, as always like to thank you for watching this video. Hope you enjoyed this video. If you did enjoy this video, please feel free to let me know about that. Bye tap that like button down below. If you do not enjoy this video then uh, give me some feedback on what I could have done more better and I'll try harder next time. So again and as always, thank you for watching and most importantly, do not forget to have yourselves a great day! See you guys later in the transmission and powering down.

97 thoughts on “Silence deleted! let it sing!! 2007 silverado 6.6 duramax”
  1. Avataaar/Circle Created with python_avatars bobbg says:

    You should put a door closer on that dam door, commercial grade. Or your going to hit it one day backing out.

  2. Avataaar/Circle Created with python_avatars A Okay says:

    If your up to it they’re having a bunch of car shenanigans this weekend there fri,sat,sun. Check into 2.4 hr of Le’mulet, burn out contest, +. Cleetus Mcfarland youtube channel

  3. Avataaar/Circle Created with python_avatars Rick Y. C. says:

    WOW taking off that tip was about half way thru this video…lol

  4. Avataaar/Circle Created with python_avatars Kenneth Schilling says:

    Ray it isn't a good idea to run over your extension cords it damages the wires in them so it might be a good idea to get shop cords that hang from the ceiling that can retract. It is just a suggestion.

  5. Avataaar/Circle Created with python_avatars Colin Lyon says:

    A can of rust spray paint wouldn't go amiss under that truck

  6. Avataaar/Circle Created with python_avatars Magnum Muscle says:

    Those racks make me nervous. I would be using tall jack stands for extra support and to balance the load.

  7. Avataaar/Circle Created with python_avatars Timothy Laurent says:

    Close that small door and it would be easier to get the truck in and out your losing at least a foot of room but I do enjoy watching your videos keep up the great work

  8. Avataaar/Circle Created with python_avatars youdosuck says:

    Wife Unit is a Babe Unit

  9. Avataaar/Circle Created with python_avatars Skookapalooza says:

    Nice!!!

  10. Avataaar/Circle Created with python_avatars D'l33t C0dr says:

    Wife Unit, you are a classy young woman and a very commendable spouse. I hope you & Ray enjoy a very long marriage.

  11. Avataaar/Circle Created with python_avatars gaz ferg says:

    i would rather a 4 post wheels free hoist over a two post at that weight.

  12. Avataaar/Circle Created with python_avatars Christopher Wise says:

    the wife unit has it going on…

  13. Avataaar/Circle Created with python_avatars Cheese Burger says:

    I just put a 4" pipe on my 1.3 sohc non vtec civic.

  14. Avataaar/Circle Created with python_avatars John Angelico says:

    Suggestion: put markers on the floor (for you US folks in feet) to guide you with different vehicle sizes into each of your lifts.

  15. Avataaar/Circle Created with python_avatars David Bowsher says:

    I agree. I like lubing the hole. Does that sound dirty? Didn't mean it to sound dirty. It's just mechanics.

  16. Avataaar/Circle Created with python_avatars Cheese Burger says:

    I dont know how you do it Ray. The number of incoherent know it alls in the comment section is incredible.

  17. Avataaar/Circle Created with python_avatars Ihate Dietcola says:

    Wish you were in Washington State. Wouldn't mind you doing some work on my old Dakota so that I don't have to do it lol. And I know you would do it right. Be careful with the background music., google police might hit you with copywrite and demonitize your videos.

  18. Avataaar/Circle Created with python_avatars stanley koziol says:

    i cheat with my clamps i put on one untill it breaks to crimp the pipe then put on the good one

  19. Avataaar/Circle Created with python_avatars Vincent Apa says:

    So mucb bangin' I had to rate it XXXX !

  20. Avataaar/Circle Created with python_avatars Richard Purton says:

    Just gonna say this once, and take it in the good humour that it is intended, we have a saying in Australia, mate , you are batting out of your league. If you need that explained, let me know LOL, regards from OZ

  21. Avataaar/Circle Created with python_avatars morton upshot says:

    dry insertion of the tailpipe is just rude and totally uncalled for in this modern day.

  22. Avataaar/Circle Created with python_avatars Sean Powers says:

    Wife unit lol

  23. Avataaar/Circle Created with python_avatars Laura Vance says:

    Soooo…. innuendo porn today? Should've done a pornstache. 😇

  24. Avataaar/Circle Created with python_avatars Tim Graham says:

    You should always lubricate the shaft and hole.

  25. Avataaar/Circle Created with python_avatars Brandon Caldwell says:

    Just the tip… reminds me of my first time. Just the tip, but of course it ended up being much more as i had to do the full thing. You know test out the fitment at the tip usually falls out. Turns out it all was a touch tight afterwards 🤣

  26. Avataaar/Circle Created with python_avatars Chris McCaslin says:

    More cowbell!!!

  27. Avataaar/Circle Created with python_avatars MobileTec Jay says:

    Can you link your rear view camera? The one thats on your mirror.

  28. Avataaar/Circle Created with python_avatars livingdeadbtu says:

    REEEEEEEEEEE exhaust modifications!!!
    Lol, I'm in Texas… we do that stuff all day long. I cannot confirm or deny I just helped my buddy install some kind of tubular intake thing on his Ford just this week… looked kinda….legal, I guess. We threw a lot of parts in his bed for storage though!
    Glad your mods are kosh!

  29. Avataaar/Circle Created with python_avatars Diavel_K says:

    Question: how do you validate that the floor can take the weight of the loaded lift? Would think that the lift concentrates the weight on a much smaller area of concrete, which may / may not hold up.

  30. Avataaar/Circle Created with python_avatars HoundDogMech says:

    Do you also Use Remote Mics or Voice over in some spots? Us Wouldbe Editors need to know.

  31. Avataaar/Circle Created with python_avatars Dave George says:

    Nuclear fusion only possible with muffler pipe removal.

  32. Avataaar/Circle Created with python_avatars Noah Howard says:

    What you could've done more betterer is to tell us about that vette you were parked next to! But seriously, good video.

  33. Avataaar/Circle Created with python_avatars julius liles says:

    I get it Ray, I have a 1997 12 valve. It will never be done, I plan on driving it another 10 years. New diesel's lack reliability, fuel economy, and generally suck!

  34. Avataaar/Circle Created with python_avatars WalkenDead1369 says:

    The full length of that tip was shoved onto the pipe. That's a bit of overkill

  35. Avataaar/Circle Created with python_avatars Mark Dearman says:

    You need to switch your lifts. put the 12k on the right side.

  36. Avataaar/Circle Created with python_avatars PayMe says:

    Wife unit lol

  37. Avataaar/Circle Created with python_avatars Hyde Whyte says:

    Watch the frame flex … now I'm hungry for a taco

  38. Avataaar/Circle Created with python_avatars rbr2c says:

    isn't it nice, no goofy service writer to rush you or tell you what to do. You will need a shop manager to handle all the office bits. Perhaps you have the wife unit to do that now. Kinda like SouthMain Auto does it.

  39. Avataaar/Circle Created with python_avatars adrian nicholson says:

    having your own business is all good but you need the right staff to do all the accounts billing and PR and to pay the power account and make dam sure there is more money coming in than going out and to pay wages and yes the business pays you a wage and you own the business not it owns you but at the end of the day all ways put your family first happy wife happy life

  40. Avataaar/Circle Created with python_avatars Tony Facebook says:

    Looks great. Put a door closer on the swinging door

  41. Avataaar/Circle Created with python_avatars Stephen Cryoskie says:

    …had to break out the dead blow Ford tool to remove the tip!

  42. Avataaar/Circle Created with python_avatars Hola! Ronald Fulton says:

    Lift is out of adjustment. Instructions are online.

  43. Avataaar/Circle Created with python_avatars Joseph Egon says:

    Don't look up (just the tip) it might scar you lol

  44. Avataaar/Circle Created with python_avatars Phuoc Nguyen says:

    the way you have that left there no room if its like that
    it waiting for something to happen dent or scratch on someone car

  45. Avataaar/Circle Created with python_avatars Robert Bull Carmichael says:

    After watching you do all that work on the tip, my arms hurt and thought I needed a nap.

  46. Avataaar/Circle Created with python_avatars HKGaming says:

    Where can i get those hangar pliers?

  47. Avataaar/Circle Created with python_avatars Robert Page says:

    During the tailpipe end removal, you needed that universal meme, "A Few Hours Later" in a bad French accent.

  48. Avataaar/Circle Created with python_avatars Dlf Idgaf says:

    so you getting any work in you're shop ??

  49. Avataaar/Circle Created with python_avatars michael seward says:

    I think you should switch the lifts around.

  50. Avataaar/Circle Created with python_avatars mike94560 says:

    I got those wrenches a while back. Nice and long. Distances me from the grease and hot stuff. I like them.

  51. Avataaar/Circle Created with python_avatars Chris Lizon says:

    not a single doodledoodlydoo in the whole video, this new shop is so strange….

  52. Avataaar/Circle Created with python_avatars Robert Page says:

    You need an automatic door closer on that door,
    They make spring hinges that will do that.

  53. Avataaar/Circle Created with python_avatars TheBwkaylor says:

    I just noticed something. I have a 06 duramax 2500hd. I have a solid aluminum drive shaft. I realized that the dually has a two piece drive shaft. Is that how all duallys are?

  54. Avataaar/Circle Created with python_avatars Chris Robinson says:

    Make a whole video just about my tip…

    No. Just NO.

  55. Avataaar/Circle Created with python_avatars Rich Lockyer says:

    Put the old tip on your weed blower 😀

  56. Avataaar/Circle Created with python_avatars Walter Butscher says:

    Great job. Just curious is that a diesel thing when you say tune the exhaust? Still sounds and looks great. Have a great day Ray

  57. Avataaar/Circle Created with python_avatars Albert Nieves says:

    Ray we need the phone Ring. It's not the same without the dudududu.

  58. Avataaar/Circle Created with python_avatars Peter Casella says:

    I would swap the lifts if you can. Pull straight in on the bigger lift would be much easier. Also you should just speed up the video like a lot of others do instead of watching you beating on that thing for a while lol.

  59. Avataaar/Circle Created with python_avatars Scott R says:

    That's the sound i want my suburban to make. That is perfect!

  60. Avataaar/Circle Created with python_avatars Nick A says:

    Just curious what does your wife think about you being your own boss? Pretty sure I know the answer but still curious

  61. Avataaar/Circle Created with python_avatars Shadowofchaos 89 says:

    Hello Brother in law! Keep Ray on track and enjoy the melted cheese. You stay safe!

  62. Avataaar/Circle Created with python_avatars Walter Latham says:

    Ever consider reversing the racks?

  63. Avataaar/Circle Created with python_avatars Walter Latham says:

    Ever consider reversing the racks?

  64. Avataaar/Circle Created with python_avatars Pendex Welding says:

    Ive got a 2020 Sierra dually with the 6.6 dirty -max and Im thinking about doing this same project in the spring. Do you think the sound was worth it the money?

  65. Avataaar/Circle Created with python_avatars Andrew Ahlfeld says:

    i had mbrp 4 inch on my 02 f250. id like to do full 4 inch on my 96 f350 as well.

  66. Avataaar/Circle Created with python_avatars HAMMER300RUM says:

    Wife unit… help me 🤣🤣

  67. Avataaar/Circle Created with python_avatars Michael's Productions says:

    Dam send those pipes to Wisconsin there in great shape for the salt belt

  68. Avataaar/Circle Created with python_avatars Eastern KY Views (Larry Epling) says:

    Never go in dry 😆😆

  69. Avataaar/Circle Created with python_avatars Daniel Jordan says:

    You all have lovely manners with each other, it's a great thing to witness! Please, thank you, and you're welcome all come easy to you and your family. Great work as always, but that's to be expected!

  70. Avataaar/Circle Created with python_avatars Jason Olsen says:

    I want to know more about the cursed fondue set. Are we just not going to talk about how it appeared in his neighbor's back seat?

  71. Avataaar/Circle Created with python_avatars scott russell says:

    Since it is a Chevy diesel it will sound like a civic with no muffler

  72. Avataaar/Circle Created with python_avatars Jr & I Davis III says:

    You should have stuck a BIG regular screwdriver in the slot and twist. It would have helped loosen.

  73. Avataaar/Circle Created with python_avatars Eric DesRosiers says:

    Hey Ray, what can you tell me about Trailer Brake System warning when I start the vehicle.

  74. Avataaar/Circle Created with python_avatars Redacted Logic says:

    That top view flex was crazy. I knew trucks flex but DAMN not that much. Lol thanks for sharing!

  75. Avataaar/Circle Created with python_avatars marty says:

    Chevy THUNDER

  76. Avataaar/Circle Created with python_avatars Matthew Friedly says:

    is it really a tip when it's shoved so far on?

  77. Avataaar/Circle Created with python_avatars Shane Curfman says:

    You're driving my OCD nuts with leaving that side door open, especially when bringing vehicles in. 🥴

  78. Avataaar/Circle Created with python_avatars Charles Casey says:

    Whe is that Vet just sitting there?

  79. Avataaar/Circle Created with python_avatars BigDish101 says:

    Nothing compared to all the open pipes I hear here in Texas on a daily basis.

  80. Avataaar/Circle Created with python_avatars Hoser Man says:

    I think it would be wise to move lifts so you can pull strait in.

  81. Avataaar/Circle Created with python_avatars FOXTROT says:

    This was a neat video. Really enjoyed it. Keep it up Ray!!

  82. Avataaar/Circle Created with python_avatars Mathew Novaes says:

    I want to see pulling the Silverado out of the shop. 😮 editing it because at end you took it out lol. Thank you great shop.

  83. Avataaar/Circle Created with python_avatars Mike Martin says:

    No wonder that's such a good truck u got it from here in sweet home Alabama lol

  84. Avataaar/Circle Created with python_avatars Maxx Michael says:

    thew muffler was for keeping. the "coal smoke" from coming out the end….

  85. Avataaar/Circle Created with python_avatars Patriot Land Management LLC says:

    Who was the genius who installed the high capacity lift at an angle to the door. That is dumb. It should be straight in the door

  86. Avataaar/Circle Created with python_avatars franco deiuliis says:

    Nice upgrade for you and your truck
    Wife unit lol I get a kick out of that and she answers 😂😂😂
    Cheers from Nova Scotia

  87. Avataaar/Circle Created with python_avatars bobcougar77 says:

    I didn't see a catalytic converter? Already stolen or did I just miss it?

  88. Avataaar/Circle Created with python_avatars Robert McBee says:

    On my Banks exhaust for my 04 Silverado the tone is a lot louder than yours… which I don't mind, except, that I have a hard time hearing any conversations inside while driving. One thing you might look at is the angle in which your exhaust tip is pointing, which I think is "up". This will allow water to sit inside vs. down, or flat, which will allow for it to not get in there in the first place. Wish I could afford all of the Banks goodies for my rig… maybe when I win the lottery! I shoulda started working for him back in the 60's when I saw a rail at Irwindale run twin turbos. Coolest thing I had ever seen! Can't beat Banks products!

  89. Avataaar/Circle Created with python_avatars David K says:

    While you were pounding away on the exhaust tip I was flashing back on Sid Caesar and Edie Adams in the hardware store basement, pounding on the door to escape in "It's a Mad, Mad. Mad, Mad World."

  90. Avataaar/Circle Created with python_avatars HouseCallAutoRepair says:

    "I like my Duramax in two parts…" "…Rear half gravity"

  91. Avataaar/Circle Created with python_avatars Shane Robertson says:

    That seems to be your go-to rack, any reason not to swipe them? Is it difficult

  92. Avataaar/Circle Created with python_avatars Maxx Michael says:

    do t think that's suppose to do that….
    I'd be looking at the frame very carefully… and possibly putting metal flux and looking for cracks in the frame rail it's self…. and then if all good… really. reinforce that truck frame
    good video as usual 😎🤘

  93. Avataaar/Circle Created with python_avatars Hola! Jason Hankins says:

    "All this work for just the tip?" 🤣

  94. Avataaar/Circle Created with python_avatars OnE says:

    Wife unit 😂😂

  95. Avataaar/Circle Created with python_avatars Know One says:

    careful with that old dog….it might break in half…LOL

  96. Avataaar/Circle Created with python_avatars Hot Wheelz says:

    Oh the little boy in us blokes never really leaves. Ray has had the components for the front end rebuild of his truck sitting around for the past 6 weeks or so but the new exhaust arrives and its on the truck the same week. Priorities 😂…. Not knocking you Ray, I do hope that you enjoy the new throatier exhaust sound (It does sound much better) and you probably also got a modest performance bump from moving to a 4 inch exhaust. Definitely need an exhaust tip to finish the ensemble though. Looking forward to the front end rebuild.

  97. Avataaar/Circle Created with python_avatars Banks Power says:

    Thanks for installing a Monster Exhaust on your Duramax! But you definitely need an exhaust tip. Keep an eye open. We're dropping one in the mail.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.