Come along with Eric O. at the SMA shop as he installs a "Billy Boat Fusion Exhaust" on this 2010 C6 Chevy Corvette Grandsport. In this video we show the installation of the control box and removal of the stock mufflers.
Part II : https://youtu.be/16CmbPDljm8
http://www.bbexhaust.com/shop/chevy-c6-corvette-fusion-exhaust-for-factory-npp-3/
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : http://astore.amazon.com/httpswwwy083...
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

49 thoughts on “Billy boat fusion exhaust – c6 corvette install – part i”
  1. Avataaar/Circle Created with python_avatars Daddyoh says:

    Aren't directions from the vendor written for a reason. Just use a cutting torch if you don't want to follow instructions by Billy Boat.

  2. Avataaar/Circle Created with python_avatars chris munos says:

    I'm glad my C6 base didn't have this version of BB on it. Someone put the more basic static BB on it. Seems like a lot of places for a failure to happen.

  3. Avataaar/Circle Created with python_avatars corkforbrains says:

    "This should bring some comments I'm assuming?" Dude.. you have NO idea!! ๐Ÿคฃ๐Ÿ˜‚๐Ÿ˜†

  4. Avataaar/Circle Created with python_avatars Johnny Sechrist says:

    High priced stuff…I like a manual cut-out. Welding required. Even doing an alignment on a Vette is a headache.

  5. Avataaar/Circle Created with python_avatars Richard Langhorst says:

    You should block out customer plates

  6. Avataaar/Circle Created with python_avatars Frank Reichl says:

    should have pulled the short end into the box .

  7. Avataaar/Circle Created with python_avatars Frank Reichl says:

    OMG Now my ids know where babies come from ! ;O

  8. Avataaar/Circle Created with python_avatars Jason Cruise says:

    ๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘

  9. Avataaar/Circle Created with python_avatars B. W says:

    I think I'm going to name my band Droppin' Sockets

  10. Avataaar/Circle Created with python_avatars skidco1 says:

    Fantastically helpful video. I'm planning to get one of these exhausts installed and now I know how to do it.

  11. Avataaar/Circle Created with python_avatars Michael Martinez says:

    I thought you did not like that aftermarket junk.

  12. Avataaar/Circle Created with python_avatars Steve G says:

    Must have been nice not fighting a bunch of rust for a change.

  13. Avataaar/Circle Created with python_avatars richard Turk says:

    Its pronounced button not bu en

  14. Avataaar/Circle Created with python_avatars dailystance 63 says:

    I came here cause I thought the last owner welded those clams on and I just wanted to be sure if they just come like that before I saw that weld off ๐Ÿ˜‚

  15. Avataaar/Circle Created with python_avatars no body says:

    I hate when a customer stands over me when I'm working it doesn't matter if they r cool r not it still makes u uncomfortable and nothing is going to go right

  16. Avataaar/Circle Created with python_avatars Ozzy Krahn says:

    im not a fan of after market, but i say this system is by far well desinged

  17. Avataaar/Circle Created with python_avatars phil merrifield says:

    Eric Eric Eric tut tut tut thought these videos are meant to be pg lmfao ๐Ÿคฃ๐Ÿคฃ๐Ÿคฃ๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜ now I'm not going to say what that looks like to me on that whiteboard

  18. Avataaar/Circle Created with python_avatars highrzr says:

    The grade school humor is never lost…poor Hannah. Good job!

  19. Avataaar/Circle Created with python_avatars mindtouchone says:

    Wouldn't it have been easier to access vacuum by installing a T into the brake booster hose?

  20. Avataaar/Circle Created with python_avatars Orpheuss says:

    Hold up, this is the first Grandsport Iโ€™ve ever seen with out a dry sump piling system. I donโ€™t believe you have a real GS…..

  21. Avataaar/Circle Created with python_avatars djhaloeight says:

    Vacuum cutouts eh? Never seen those. I think the electric ones would last longer and work faster…no need to run air lines to the motor etc. Just the power/control wiring.

  22. Avataaar/Circle Created with python_avatars Leonard Klein says:

    WHAT A DICK !

  23. Avataaar/Circle Created with python_avatars Amanda Montgomery says:

    A VACUUM PENIS NIPPLE. WOW! Now I want a Corvette.

  24. Avataaar/Circle Created with python_avatars Frank says:

    Is that car a automatic or manual?

  25. Avataaar/Circle Created with python_avatars Sean John022992 says:

    the extra 6 inch of wire to make it easier to install would have put billy boat out of business ๐Ÿคฃ

  26. Avataaar/Circle Created with python_avatars Mark Hildack says:

    I kinda wanted to see how he drilled the holes into the side of that tiny trunk box๐Ÿค”

  27. Avataaar/Circle Created with python_avatars SS Sandman says:

    Awesome video. Thank you very much! I am getting ready to install the OEM NPP exhaust on my 2012 Grand Sport that didn't have it stock, so I will be adding the NPP in a Box kit which is pretty much the same as this Fusion controller to control the baffles. I like how you installed the control module in the cubby hole.

  28. Avataaar/Circle Created with python_avatars Ceasar Vasquez says:

    Man those were some drawings ๐Ÿ˜‚

  29. Avataaar/Circle Created with python_avatars ROBERT R Penny says:

    Didn't know this was an x rated video site. But you're kicking it up a notch from Escapes with evap codes. Vettes and erotic art should help viewer interest quite a bit.

  30. Avataaar/Circle Created with python_avatars The Alignment Guy (R) says:

    Rubber exhaust hangers and other flexible parts: Pledge furniture polish might be the slipperiest water based thing in auto repair.

    JMF The Alignment Guy

  31. Avataaar/Circle Created with python_avatars zakura ayame says:

    I did not expect that to fold down like that in the passenger footwell. That seems really nice and clean. New respect for Corvettes. I really like the C7, so maybe in a decade or two, find a steal on one as there are many other cars I'd rather have at even the used price range of a C7. But much nicer than the fit and finish of the older ones I've been in certainly. Color me impressed.

  32. Avataaar/Circle Created with python_avatars Kaye Wortman says:

    Really clean under there Eric

  33. Avataaar/Circle Created with python_avatars Van says:

    nice drawing. LOL

  34. Avataaar/Circle Created with python_avatars Ron S says:

    But can she do it?

  35. Avataaar/Circle Created with python_avatars Nebur Salcido says:

    Sickooooo๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚

  36. Avataaar/Circle Created with python_avatars BAR 20 BBQ says:

    hahahaha Eric drew a ding ding lol

  37. Avataaar/Circle Created with python_avatars ffhgu 07 says:

    One of my favorite cars on SMA this is a treat

  38. Avataaar/Circle Created with python_avatars Doug Borrett says:

    Dick and balls minus the balls.

  39. Avataaar/Circle Created with python_avatars Kent Schroeder says:

    Fun video t watch even though Iโ€™m a couple of years after everyone else. The black box left of the fuse panel in the passenger footwell is probably the body control module.

  40. Avataaar/Circle Created with python_avatars Roberta Williamson says:

    Push the long hose up from the bottom and you don't have to push much,duh.

  41. Avataaar/Circle Created with python_avatars Roberta Williamson says:

    After market ,huh,I remember someone saying some rather rude comments about after market "junk" ,making their job harder,hmmm,can't put my finger on the name,but I'm sure it will come to me.

  42. Avataaar/Circle Created with python_avatars Roberta Williamson says:

    Looks like a male thingy.

  43. Avataaar/Circle Created with python_avatars Roberta Williamson says:

    You've drawn a picture for us on the board twice that I know of and Josh is running that dang impact wrench both times,do you time this on purpose just for laughs?

  44. Avataaar/Circle Created with python_avatars Eric Bennett says:

    you let me down eric! installing aftermarket CRAP! SHAME ON YOU!