49 thoughts on “Customer states: wire coming out of glass?”
  1. Avataaar/Circle Created with python_avatars Hola! anonymuswere says:

    hey, I think you've just given me a possible solution for a problem in my last two cars! I get on and off pressure hiss from my current car when I pull the gas cap, and the previous one never seems to hold any pressure in the tank.

  2. Avataaar/Circle Created with python_avatars Javier Cadena says:

    U need to pour things..fyi i appreciate the work u post…it has integrity..

  3. Avataaar/Circle Created with python_avatars A g J . 7 says:

    You took two bolts out of the bottom track and only installed one, Why ?, Cumon Ray, Get a grip

  4. Avataaar/Circle Created with python_avatars Jerrod James says:

    I just found your channel and I watch it often I am an auto body technician with 20 years experience. I enjoy watching you work. You forgot the bolt in the left bottom corner of the window track but but it's not like I've never done it.

  5. Avataaar/Circle Created with python_avatars Chuck Smitley V says:

    Ah it’s the 3.7 V6… the Grundy noise is normal 😂😂

  6. Avataaar/Circle Created with python_avatars Tom Kennedy says:

    is that your regulator, or is your window just happy to see me?

  7. Avataaar/Circle Created with python_avatars Ken Smith says:

    I absolutely hate dodge electrical connectors!

  8. Avataaar/Circle Created with python_avatars David Mata says:

    You have the patience of Job my friend. In all honesty if I had to go through what you just went through with the door motor I would have scrapped it, left it that way and just motored on.. Or I would have destroyed the door out of frustration, broke the window, thrown a tantrum and then maybe walk away after a little more destruction.. Then I would calm down a bit, go check what I just did, felt guilty and then take it somewhere to pay double what it would have cost to fix it in the first place plus the extra damage I created.. LMAO – – You are a saint..!! :)~

  9. Avataaar/Circle Created with python_avatars The Wrong MF says:

    I knew from the thumbnail it was a Jeep Liberty. Worst regulators ever.

  10. Avataaar/Circle Created with python_avatars Christopher Sines says:

    Maybe a softer rubber doorstop for holding up the glass. Better gription maybe. Sort of thing you buy and it sits for a year before you need it again. But when you do your glad to have it. Occasionally may find other uses for it which adds to the value in the space it takes up. Got a handful of objects like these on my truck.

  11. Avataaar/Circle Created with python_avatars Pj Boudwin says:

    i'm stealing your comment econo box with a jeep badge on it when some one says they have a jeep other then a real 2 door jeep I say no you have a in this case a liberty its just made by jeep but I also tell people with 4 door jeeps they have fire wood made of metal or a low class Hummer not a jeep haha

  12. Avataaar/Circle Created with python_avatars Castinn says:

    I've had good luck using a razor blade on the black door seal goo. It leaves some on the door and it leaves some on the liner – super easy to get off and super easy to reattach the liner to to the door. Just pull the liner away an inch or so and make slices with the razor blade.

  13. Avataaar/Circle Created with python_avatars Russ L says:

    good job , just one question , did you put the second bolt in at the bottom of the vertical tract ? the camera didn't show it . any spare parts ? lol

  14. Avataaar/Circle Created with python_avatars The Dramanator says:

    Your code scanner obviously doesn’t speak Italian.

  15. Avataaar/Circle Created with python_avatars Ynnel?! says:

    you know when the cord is coming out of the window, the regulator is Fucked, with a capital F.

  16. Avataaar/Circle Created with python_avatars starving artist says:

    You should of open the oil spout cap to see if the motor has a lot of blowback , I had one that did, they sold it to me like that, unless I'm wrong , that's a sign bad piston rings or possibly a head gasket on any other motor that does that,,,,I mean you could hear the exhaust coming out of it and it covered my hand with an oil film, I quite sure it shouldn't be doing that,,,,,I took back to the dealer and gave it back, I hadnt even made the first payment,,,,they can eat that one !

  17. Avataaar/Circle Created with python_avatars Per-Johnny Tøgersen says:

    Did you remember to put the two paperclip-like pin clamps for the window bracket inside to the mecanism?

  18. Avataaar/Circle Created with python_avatars David S says:

    I laughed my as off. Can you imagine going down the road at 70mph, and that wire comes up. I'd have a heart attack.

  19. Avataaar/Circle Created with python_avatars randy beard says:

    This is one of those jobs that sometimes you have to walk away, Relax for awhile, come back and fix it…

  20. Avataaar/Circle Created with python_avatars robert marini says:

    why did u replace window regulator, the cable needed tobe rerouted

  21. Avataaar/Circle Created with python_avatars Martin Ström says:

    You for got 1 screw…. The windowslide will now be unevenly loaded and might breake due to this misstake.

  22. Avataaar/Circle Created with python_avatars Eric Hamilton says:

    You are the man Ray. Had a shop repair a broken window and the moron that did the repair just took a knife and cut the plastic door liner so it ruined the barrier.

  23. Avataaar/Circle Created with python_avatars Shari Lee Slater says:

    put your suction cups on window Ray!!!!!! lol

  24. Avataaar/Circle Created with python_avatars William Duncan says:

    Good video Ray look forward to more 👍👌

  25. Avataaar/Circle Created with python_avatars Black III says:

    I see you forgot to snap in that cable tail end into its plastic button hole. No big deal but it could chafe or rattle around. I've done this repair on various vehicles half a dozen times. It's nice to see Jeep has a sorta bullet proof door panel removal sequence. No hidden hardware to bust the panel out.

  26. Avataaar/Circle Created with python_avatars bug bug says:

    fixed a couple smashed windows …..tons of glass at the bottom…make sure you get the pieces around where the glass slides into the frame…cut my wrists …sharp as hell those areas….

  27. Avataaar/Circle Created with python_avatars BurritoMagnifico says:

    Didnt see him put the pins back in holding the glass lol

  28. Avataaar/Circle Created with python_avatars Bleek Man says:

    Thanks for showing all the details and not just saying "remove the door panel" and then jumping to "disconnect electrical".

  29. Avataaar/Circle Created with python_avatars DenmarkRadar says:

    The second lower bolt for the vertical bar of the window-mechanism… Reeeeeeeeee!

  30. Avataaar/Circle Created with python_avatars Crash Zone says:

    couldnt you just put a glove on a wedge to help to stop it? I you recommend shelf liner, or some type of rubber, but since you always seem to have rubber gloves I figure that was an easy fix.

  31. Avataaar/Circle Created with python_avatars JW Imposter says:

    Am I the only one who noticed that you didn't replace (or mention replacing) the pin retention clips once you had correctly aligned the pins in the regulator?

    As well as the third screw/bolt at the bottom of the regulator assembly?

  32. Avataaar/Circle Created with python_avatars Daniel Delrie says:

    I have to work on my car myself , thanks for info

  33. Avataaar/Circle Created with python_avatars Tim Mack says:

    I was reaching for the Valium when I saw it was the power window. I've done a few, not happily.

  34. Avataaar/Circle Created with python_avatars Paul Monk says:

    A rubber door stop can be used to hold the glass up. Or put friction tape on your wedges.

  35. Avataaar/Circle Created with python_avatars Paul Monk says:

    Cover those sharp edges in the door panel with masking tape.

  36. Avataaar/Circle Created with python_avatars Don Bavol says:

    I am glad to see you didn't install the speaker in upside down. When you do accidentally install them upside down, the music plays backward.

  37. Avataaar/Circle Created with python_avatars raphael bussy says:

    Looks like you forgot a bolt on the railing, bottom part.

  38. Avataaar/Circle Created with python_avatars NerveGas says:

    I'm no mechanic but I love watching these videos. I try to learn as much new stuff as I can…but I mist have missed a step? I didn't see how you got those little clips back on the pins of the window slide?

  39. Avataaar/Circle Created with python_avatars christopher miller says:

    I’m so triggered. How dare you gender that connector as female. You have no right telling it it’s pronoun. HA!

  40. Avataaar/Circle Created with python_avatars James Robinson says:

    Yes Ray have got my F150 back from dealership with smudges allover the 👓
    NOT COOL, 😑

  41. Avataaar/Circle Created with python_avatars Frank Daddyoh says:

    Your so slick ….you skipped over a missing screw on the regulator assembly . I know you saw it , we saw it …. we know !…

  42. Avataaar/Circle Created with python_avatars Tony Winslow says:

    02-07 Jeep liberty are know for window clips on rear passenger to break you can just replace the clips. Also the white pipe that the worm screw travels through breaks at the ell on the window track or at the motor sometimes you can clean the joint and glue it back.

  43. Avataaar/Circle Created with python_avatars Denver1976Man says:

    I hate working n doors…lol

  44. Avataaar/Circle Created with python_avatars Mark Yarbrough says:

    Are the two metal clips already in place in the new unit to hold the glass pegs?