Let's go full gorilla with Eric O. for a bit on this F-150 as we get these rusty nasty exhaust manifolds off! Hopefully it goes with out snapping off any studs!! Not sure what happened to video rendering here but it looks a bit shaky? Well the price is right any how haha, enjoy!
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

47 thoughts on “Ford f-150 exhaust manifold – remove and replace”
  1. Avataaar/Circle Created with python_avatars Indian Creek says:

    You no your stuff, wish you were close to me I’d gladly pay you good money to do my o2 rust bucket, 4.6 f-150

  2. Avataaar/Circle Created with python_avatars Dennis Geroux says:

    We’re glad your full of guilt, go for it.

  3. Avataaar/Circle Created with python_avatars Fred Walker says:

    I know this is an old video! But Iv’e done my share of these Fords ! This is / like you,,,, below your pay grade! To me hard to do for the money! Once you start it,,, you own the job! Got something to do with “ego” ! Nice work, you burnt your beard, arm, neck,hair, & everything in between! LOL. But…..get r done ! Chinese parts again… Yuk !

  4. Avataaar/Circle Created with python_avatars MountainSalsa says:

    Ty

  5. Avataaar/Circle Created with python_avatars Kent Schroeder says:

    Warmed some nuts today, always good to see fire at work!

  6. Avataaar/Circle Created with python_avatars Beaver C says:

    That manifold looks like the slag that one of my coworkers use to let build up behind his bench grinder. 😳

  7. Avataaar/Circle Created with python_avatars Jeffery Bye says:

    I think thats a bunch of crap how shops and stealerships price jobs so high cause they don't wanna fix em..if you dont wanna work on stuff then they shouldn't be mechanics..its not like its all gravy unless your down in Florida..

  8. Avataaar/Circle Created with python_avatars Jeffery Bye says:

    Eric O is the brake clean master and kroil..

  9. Avataaar/Circle Created with python_avatars Don Kim says:

    Did this cause a misfire?

  10. Avataaar/Circle Created with python_avatars grey says:

    Really appreciate this video, it's just the sort of thing nobody teaches. Also the reason I subscribed. More nuts and bolts please.
    By the way, your wife is gorgeous!

  11. Avataaar/Circle Created with python_avatars Rick Ptak says:

    Cracker (rock band) also has a song called Euro Trash Girl which is a hidden track (Track 69) off of their Kerosene Hat album.

  12. Avataaar/Circle Created with python_avatars Chris L says:

    Hey Eric, I'm wondering how much you charge to do the manifolds on a truck exactly like this one? I'll gladly drive to you, I'm about an hour and some change away.

  13. Avataaar/Circle Created with python_avatars botheone40 says:

    😂 looks like gona be some carniage.

  14. Avataaar/Circle Created with python_avatars KEN MCCORMICK says:

    you should make a clicking noise, when the nut is tight enough.

  15. Avataaar/Circle Created with python_avatars Jason Garcia says:

    Nice job well done

  16. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Great video as always Eric O was very Entertaining @SouthMainAutoRepairLLC

  17. Avataaar/Circle Created with python_avatars Brian Dolata says:

    Cut the exhaust manifold off at each port and then the exhaust pipe that way you can get at the bolts with nothing in the way

  18. Avataaar/Circle Created with python_avatars J Stewart says:

    Anti seize the studs

  19. Avataaar/Circle Created with python_avatars J Stewart says:

    I thought you would have used a tap to clean out the threads ,before putting in new studs ,just a thought .

  20. Avataaar/Circle Created with python_avatars J Stewart says:

    What about using an air operated chisel for the bottom studs,I don't know how much access there is ,just a thought .

  21. Avataaar/Circle Created with python_avatars Edwin Rosales says:

    Very informative! Out of curiosity, how much is a job like that?

  22. Avataaar/Circle Created with python_avatars texg King says:

    Great work. Question? My 2013 F150 King Ranch 5.0 v8 has what appears, a water leak at one of the back exhaust manifold bolts. I believe it's the coyote 5.0. Question is do the exhaust manifold bolts protrude into the water jacket? Water appears to be dripping off the heat shield onto the exhaust at the flange,. I can't get back there yet, but figure maybe either a stud has broken off or loose enough to allow water under pressure to come out. If not there then I assume a head gasket or worse. thanks for any info you might provide.

  23. Avataaar/Circle Created with python_avatars Roberto Espinoza says:

    I've done a few of those manifolds, it needs a lot of paciens

  24. Avataaar/Circle Created with python_avatars Roberto Espinoza says:

    Miss O, she needs a cocking class

  25. Avataaar/Circle Created with python_avatars dan trejo says:

    Man I remember working in the rust belt then moved to AZ and I felt like I was spoiled to be a tech there then I came back to Michigan and I really missed AZ LOL but it's good to know how to do rusty vehicles

  26. Avataaar/Circle Created with python_avatars Lawrence Anderson says:

    I am in Florida too. Used to live on Long Island. I am gonna be up in your area mid December. Me and the family will stop by for a few hours so I can watch you work and offer some advise with whatever your doing. Just kidding. Happy Holidays

  27. Avataaar/Circle Created with python_avatars J Stewart says:

    Can't you stick the gasket to the engine block ,then offer up the manifold ,that way the manifold will be easier to fit past pipework ,then insert studs to hold manifold ,tighten up from there rather than trying to manoeuvre the manifold around the studs .

  28. Avataaar/Circle Created with python_avatars J Stewart says:

    If the manifold is scrap you could cut it in pieces in such away it gives you access to the bolts maybe without going underneath just saying.

  29. Avataaar/Circle Created with python_avatars J Stewart says:

    Can't you use an air driven chisel and just cut the nuts ,rather than. Putting fire anywhere near the car .

  30. Avataaar/Circle Created with python_avatars clasher 1234pizza says:

    Love this, much appreciated

  31. Avataaar/Circle Created with python_avatars Beardy Face says:

    Can you imagine my frustration, place I worked the boss had a torch but wouldn't buy new hoses or gas, I was taunted by the empty cylinders doing jobs like this.. he wasted more money paying me to beat on stuff & curse than repairing & re-loading the gas torch would have cost on numerous occasions.

  32. Avataaar/Circle Created with python_avatars George Karagiannis says:

    Brother, with all due respect, please make sure you know what year the vehicle you're recording is because 04, 05 or 06 is a completely different setup from 03 or earlier. I wasted 48 minutes watching this video in order to get help with my 2007 F150. Not to mention all the extra time I wasted trying to figure this out… Thanks

  33. Avataaar/Circle Created with python_avatars Bill Smith says:

    Dang! That salad looks great, and I'm not crazy about salad!

  34. Avataaar/Circle Created with python_avatars Keith’s Kustoms says:

    great video, so how much do you charge for this service?

  35. Avataaar/Circle Created with python_avatars Steve Jaenghan says:

    I betcha he uses brake clean to rinse after brushing his teeth . Keeps them pearly white .

  36. Avataaar/Circle Created with python_avatars Ed says:

    I enjoy the diagnostic stuff. You’re good at it and I learn a lot.

  37. Avataaar/Circle Created with python_avatars Blair Tully says:

    Just put new manifolds on my bought new 03 F150 Lariat Super crew. 5.4 litre/302 Triton, 79K KM'S/50,000 Yankee miles. Passenger side manifold rusted through at the front cylinder and started that terrible racket for the 1st minute every time I started it, would go away after a minute, but return every time you stepped on the gas ! One of those sit in the garage and corrode trucks. We got salt too !. Rest of the truck is like new. First job ever on this tr uck besides a battery and tires was calipers, pads, rotors 6 months ago. Your video's are excellent Eric and learned a lot with your diagnostic stuff ! You get North of the border look me up, take you and the bride for a ride in a Mahogany barrel-back along the river with a 350 Mercruiser Dad and I built. Upper NY is not far away and the torches are always hot !

  38. Avataaar/Circle Created with python_avatars Tip S says:

    My favorite part about this video is youre not wearing any gloves.

  39. Avataaar/Circle Created with python_avatars Alan Robison says:

    Did you lose your safety glasses again?

  40. Avataaar/Circle Created with python_avatars Anime Noob says:

    Can you put a link in the description for your tools?

  41. Avataaar/Circle Created with python_avatars Jim Burgess says:

    I love work – could sit and watch it for hours — Thank You for reminding me why I no longer work on my own vehicles. Protect your hands Eric – is your livelihood. (Something should arrive Sept 24 – that may help)

  42. Avataaar/Circle Created with python_avatars Contemplating suicide says:

    You made it look to easy I'm having a really hard time even with a torch

  43. Avataaar/Circle Created with python_avatars Jonathan Alcox says:

    I got to do them on the same style truck but don’t have the torch what would you suggest I use cause I would hate to deal with broken studs do you think the small nut splitters would fit on the manifold I haven’t looked

  44. Avataaar/Circle Created with python_avatars Dale Burrell says:

    …every time I watch your videos, it sounds like you're saying: "SELF MADE Auto…"-(!)

  45. Avataaar/Circle Created with python_avatars WhattheVloggity says:

    How much do you charge for a job like this?

  46. Avataaar/Circle Created with python_avatars N. B. P. Davenport says:

    I don't know the owners crazy not to put stainless studs

  47. Avataaar/Circle Created with python_avatars N. B. P. Davenport says:

    It's called stuff sit down and eat it

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.