Surplus electronic parts : https://epartsconnect.com
Stock and Crypto AI Prediction : https://stocksignalslive.com

Link to final assembly of rear axle including axle seal, diff cover and gear oil. https://youtu.be/D6LGlIAvgoU

48 thoughts on “Hit by cadillac escalade! 6.2 never fixed something like this before!”
  1. Avataaar/Circle Created with python_avatars Tuck Frudeau The Cowardly Soyboy Dictastor says:

    Is that similar to a limited slip diff?

  2. Avataaar/Circle Created with python_avatars Toomanybikes says:

    Some donkey pounded oN CALIPER with big hammer to push pistons back into caliper and bent mounting frame

  3. Avataaar/Circle Created with python_avatars Big Al says:

    PS. Thanks. You saved me a ton of extra work by showing me how to remove something.

  4. Avataaar/Circle Created with python_avatars Big Al says:

    I've got one of those bore scopes. Also, have an adjustable digital inspection camera from Harbor Freight that's been a blessing. I like HB stuff and know what to get and what not too. Mostly I've had great luck and if any of it breaks, get another with no questions. The stuff that I've had issues with is the ocassional drill with not enough power. My fault. Other than that, I've got a lot of there tools. They are having a parking lot sale and you should go by and check it out. I'm picking up a couple of torque rachets tomorrow and another camera for my Bro/inlaw. That way he can stop borrowing mine.
    Love the vids. I've been tearing down my 75 Honda 360t for paint today. Had to tag all the wires for the new harness as some of the color codes are a bit off. With my cancer, I can only put in a few hours a day and have to be careful with the grinding/sanding with one lung. BUT!!!! when I have made some progress, I get to take a shower and get in bed and watch a few of your vids. I love the stuff. I had hoped to go from a suit and tie to grease and grime when I retired but that won't be in the cards. I'll just do the vintage honda things and be happy with it. I hope to do and earlier CB 175, and if I could get my wish granted I would find a 1961 CB77 that's restorable. I love working on them.
    The one I'm doing now has a special place in my heart. It's also got a lot of work. I'd intended in making it flawless but now I'll just get her as close as I can without taking the motor out and power coating. Most of the stuff is by hand and lots of 0000.
    Sorry but the meds make me talkative. Ha. Just want you to know how much I enjoy your content and can't wait till you have your own place (if you choose).

  5. Avataaar/Circle Created with python_avatars Trev says:

    Not gonna lie. I woulda just smacked that bracket with a mallet and made it straight.

  6. Avataaar/Circle Created with python_avatars Tri Nguyen says:

    It must cost a fortune for this kind of repair. Let me guess…probably 1,500 dollars job?

  7. Avataaar/Circle Created with python_avatars bcubed72 says:

    Go eat your Fred
    Wilma and Fre-ed
    Barney, Barney, BARNEY!

    (Sponsored by Flintstone Chewable Vitamins)

  8. Avataaar/Circle Created with python_avatars John Clunan says:

    It's great to watch someone who takes so much pride in their work and does the right thing for his customers

  9. Avataaar/Circle Created with python_avatars Blowdowndro says:

    epic shaft insertion moment

  10. Avataaar/Circle Created with python_avatars Dave Colvin says:

    Take parking brake shoes off you can listen bolts manually leaving them in housing

  11. Avataaar/Circle Created with python_avatars Marc Whinery says:

    You need to drive over a camera every time. That was a hilarious shot.

  12. Avataaar/Circle Created with python_avatars A. C. E. says:

    I watched this and the previous video to it. Watching these types of videos and others like it (South Main Auto Repair and Diagnose Dan) are the best way to spend time on the internet. I do ALL of my own work and it is nice to see "some" repair shops that do good work. Off topic, but what a disappointing interior for such an expensive vehicle.

  13. Avataaar/Circle Created with python_avatars Spoder man says:

    Damn all that lol. I would of just said to clearance the caliper. Grind it or something 🤣🤣

  14. Avataaar/Circle Created with python_avatars old polak says:

    I would have put a dremil on the contact point so the bracket would not rub , if it was my car . Just saying

  15. Avataaar/Circle Created with python_avatars buixote says:

    You mean you can't just beat it into submission? 😉 Great stuff!

  16. Avataaar/Circle Created with python_avatars Brommear says:

    I must make a video of how I pull out a half shaft from a differential. It involves hammer, cutting torch and an angry customer. Oh, and a box of extra nuts, bolts and clips.

  17. Avataaar/Circle Created with python_avatars BoB Hawkins says:

    Ray what is that tool called that fits over the studs to clean the rust off the rotors

  18. Avataaar/Circle Created with python_avatars BoB Hawkins says:

    I just bought the 12.0 battery that Milwaukee came out with. If you buy this you won't be dissapointed.

  19. Avataaar/Circle Created with python_avatars dukelukeXXL says:

    please start using ceramic hightemp lube on the brake pad guides(ears) so they can float freely. Thank you !

  20. Avataaar/Circle Created with python_avatars Bill Chessell says:

    Am I noticing a little more intentional sexual innuendo or is it just a change in my perception? Perhaps much of your audience enjoys the added tongue in cheekly, I find it a distraction. You are, btw, now my goto for mindless relaxation, and yes your use of Hollywood English and a wide vocabulary makes the content easy on the ears and entertaining, but personally I’m here to watch mechanical problems and solutions, not to secondarily think about bodily functions. If you have looked at viewership and determined that the later brings more views, ignore me. Thanks for doing what you do! Much cheaper than my phycologist!

  21. Avataaar/Circle Created with python_avatars Roger Watts says:

    OMG Man… Don't use that little polisher when filming. Why? With headphones on, it sounds exactly like a dentist's drill… And it goes right through you. OMG…… UGH

  22. Avataaar/Circle Created with python_avatars Ben Avery says:

    "Shaft insertion…" Phnarr! Phnarr!!

  23. Avataaar/Circle Created with python_avatars david lambert says:

    Cataract Escalade? LOL

  24. Avataaar/Circle Created with python_avatars katzenpapa says:

    'Let's get our rubbers installed.' – An old vegas proverb.

  25. Avataaar/Circle Created with python_avatars Matt Sprayberry says:

    That's okay I'm drunk so it didn't hurt

  26. Avataaar/Circle Created with python_avatars David Lagle says:

    Good stuff

  27. Avataaar/Circle Created with python_avatars mike settlemyer says:

    your tool to big brag brag brag

  28. Avataaar/Circle Created with python_avatars Joe's Car Smarts-NY says:

    Excellent troubleshooting work.

  29. Avataaar/Circle Created with python_avatars Klaus H. says:

    Hello Ray:
    Watching You working hart, and your Commentary too boot, is what Putin and Biden should be involved in "Talking to stop their insanity in Ukrain".
    Keep on teaching the world " Old ideas " on how to get along. Forget the A–bomb for a while.
    No one asking me if I want to get incinerated. But I shure like to get my Van fixed I like traveling!
    THX
    Klaus. a. Canuck

  30. Avataaar/Circle Created with python_avatars Sean says:

    its called sil-glyde its the best when putting on axel seals and trans pan gaskets. Don't have a good day have a great day.

  31. Avataaar/Circle Created with python_avatars Bobby U says:

    I don't see how that part could bend

  32. Avataaar/Circle Created with python_avatars Hans Christoffersen says:

    hi Ray I think you meant differential locks that lock so both wheels turn round together, but you do a really good job

  33. Avataaar/Circle Created with python_avatars Hans Christoffersen says:

    i see moon and birt around my head he he he it was good Hit Ray you make a good Job

  34. Avataaar/Circle Created with python_avatars Ron Wade says:

    As a Mr. Goodwrench certified tech. my certs were numerous, multiple times and ways, I was a General Motors PDI specialist. No shit! These monsters got hot rodded by the Lot guys down in Mexico and on the dealership lots, the guys where final assembly happened trashed more than a few then shipped them. When it rained hard the guys would slide these around the parking lot and sideways into curbs and pot holes and such. I saw the last few Pontiacs and then the Escalades and Yukons and Suburbans with bent rims, axle tubes and hub plates all the time.

  35. Avataaar/Circle Created with python_avatars Jenniffer Kralick says:

    I had my breaks and rotors and all done in this shop problem I was dating the macanic but broke it off cuz he was married he put transmissions fluid in the breaks ,now I can only go a short period and then the rear breaks lock up another shop said it's done, another said $3000 I'm disabled fix income no whip Cadillac escalade sport 2002

  36. Avataaar/Circle Created with python_avatars Roberto Castillo says:

    Excellent job Ray! Greetings from Chile.

  37. Avataaar/Circle Created with python_avatars moboutmen says:

    If there's a heaven for auto repair techs, we know who goes to the front of the line.

  38. Avataaar/Circle Created with python_avatars Carlos Navarro says:

    Ray you and Eric O should have a TV show together

  39. Avataaar/Circle Created with python_avatars Cristina Cocchi says:

    Just don't understand why people rate these apalling pieces of junk,seems like they are very problematic and time consuming to fix,plus they have quite old technology even for an American car🤔

  40. Avataaar/Circle Created with python_avatars Twin Chantilly Tiffanys Benny & Bandit says:

    Just started watching your vids. Love um! I’m a detail guy, but I’m am learning from watching your jobs. I was thinking on your last days in life when you take your final breath say “click”! Lol!😂 love you man!🤙

  41. Avataaar/Circle Created with python_avatars Jcreek201 says:

    Reeeee! Gotta clean those threads before adding Loctite.

  42. Avataaar/Circle Created with python_avatars Alan Rose says:

    Brake adjuster? And its link inside the drum?

  43. Avataaar/Circle Created with python_avatars P Lovell says:

    Hey Ray, I am curious about how long it actually took to do all this work. Is there also a book time for this job?

  44. Avataaar/Circle Created with python_avatars Andrew says:

    Parts washer fountain edition.

  45. Avataaar/Circle Created with python_avatars Greg Lopez says:

    Awesome job 👍

  46. Avataaar/Circle Created with python_avatars Robert Small says:

    Only question, why didn't you put Anti- seize between the axle plate and the brum rotor after you cleaned it up? It will rust again and be harder to get off next time. Just curious?

  47. Avataaar/Circle Created with python_avatars Scott Melville says:

    Why is that same song nearly every time

  48. Avataaar/Circle Created with python_avatars Bill Proto says:

    I just threw that part number into Rock Auto and they have it listed for $63.89
    I also happen to have that exact entire axle sitting in my garage trying to get sold for the last 3 years 🤣

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.