Full Length Video here! Must Watch! Pre Fill the Filter? Oil Change Repair SCAM video! Fake!
https://youtu.be/cD4noPBwB9c
Do not do this, it will destroy or damage your engine. Always follow manufacturers instructions or hire a trained professional.
https://youtu.be/cD4noPBwB9c
Do not do this, it will destroy or damage your engine. Always follow manufacturers instructions or hire a trained professional.
So first thing we're going to do is we're going to pre-fill this filter with lubricant. That way when we start the engine, it doesn't run without Lube inside of it. So we're just going to give this a good support here a little bit of dielectric because it's nice and thick. It's going to coat all the surfaces that's going to ensure the engine stays lubricated.
Next, we want to make sure that the seal is good so it doesn't leak oil. so we're going to apply a very thin film of sealant. There we go. Just like that, All right.
And of course, we want to make sure that this filter stays on and doesn't come off. So we're just going to put a little bit of Loctite There we go. All right now, we're ready for install. Good to go.
Even this is getting out of control
This too shall pass🤷🏻♂️
I just weld the filter in place, cause screw the next guy
Lord have mercy! How many people will actually follow this 'advice'? 🤷🏼♂️🤦🏼♂️
Basic mechanics 101, come in for an oil change and leave with thousands in damage.
Ray you forgot to weld a nut on the bottom for easy future removal!
Last oil change ever lol
Oh my God never changed Eeyore oil like that unless you never want the oil filter come off
Looks easy enough !! Thanks for the walkthrough
Should of put sealant inside the thread hole as well so it doesn’t leak next time you remove it as well. Oh and paint the bottom of the dipstick black at the full line saves heaps of oil .
Just delete the filter. it saves time and money….. in the short-term.
You know you can get sued for this! If someone actually does it!
I subscribed immediately after this
Oh the Stupidity!
In another video, you mentioned that pre-filling introduces particulates
lmaooo
y a that ill work fine
Wow that's what I been doing wrong.😮😂😊
😂😂😂
You forgot to wag your finger at us. 😂
Can't believe you didn't put oil in the filter first…..
I didn't know you worked at Walmart
All that wasted…. It’s bugging me
Did my man just 900 caulk that filter ?😂😂😭
American engineering, worst in the world
I am at such a loss for words 😂😂😂
Who hurt you?
Powdered graphite works best for the filter prelube and couple #2 pencils provide a slow release to help reach those 15k oil changes. You have to remove the eraser and metal band first. I made the swith from rtv to tire bead sealer since you need a wire brush to get it off the engine block, no leaks ever unless you remove the filter.
Must be for the ex's
Thank you, I just bought the dielectric grease and rtv, I'm off to do my very first oil change.
Someone is gonna do this Ray.
Lmao the loctite got me
Thanks so much for this I done this to my car before selling to car max
Court case coming
Thank you for the tip 👍
I’ve been doing it all wrong!
🤦♂️😂
Keeps the engine lubricated, 🤔 cause oil is so dry obviously 😂😂😂
You forgot the double gasket for extra sealing power
<s>
Duh! That orange colored goop 'sealant' will do a 'wunderbar' solution, when you turn on the engine — and that greasy lubricant will make the oil viscosity 'magically' go from 0W50 synthetic airplane specifications all the way up to to intergalactic time-space travel grade analogous to -1000W1000+. 👀
🙄Way to go! 🤣💦
Ps: search bracketed terms to evolve back to the future:
《O'Reilly Great Scott 1.21 gigawatt¹》
¹ Plutonium consumables available locally but elsewhere than O'Reilly — Bummer!
</s>
Crazy Town in the background.
you better make sure your viewers understand that this is a joke.
someone WILL TRY IT not knowing any better.
too bad for their own car..
How do you charge up the dielectric grease, I was told to rub the oil filter on my jumper a bit for a quick static charge. 😊
Makin sure it never comes off, and never filters anything lol
just rub engine oil on the o ring install it then put new oil in motor wait 5 minutes then start engine
Customer pissed this guy off 100.
Please tell me this is a spoof? Please?
Oh boy, Ray really hate this customer 🤣🤣🤣
Man i am mad as can be i have beem following you i like your ideas and have followed your advice and now i have to replace a motor THANKS FOR NOTHING🤬
I like to put a good coating of sand on the top the grit keeps it from spinning off
I hope this is a joke😅
Ok, I thought with was a serious video, until I saw the dielectric grease
LMFAOOOO bro you know some one will do this to there car LMFAOOOO 😂
This is great, People will fall for it LOL
Damn-it!!! You got me😅
Thought you lost your damn mind there for a second
This hack will end up a customer states video. " changed my own oil"
This free oil change for my enemy 😅😅
Imagine the idiots who tried this 😂💀
You forgot to poop in it 😂
That filter can't be sitting right at all. 1 rubber gasket and orange silicone to make another gasket will let oil leak right through it. The original gasket that comes on the filter is good enough
This is hilarious but man someone i so goin to think this is real and do this
was this sent out on 1 of april then i can understand this XD
What a joke
This is a joke
Over kill
in the Real High Dollar shops they Fill the Filter with Gasoline to clean the Engine for the Next oil change.
You forgot to add some melted chocolate.
This helps emulsify the coagulation process around the crank journals ⚠️
Quick change training video
It’s definitely his wife’s vehicle
You know some asshat just did that after watching this lmao
I don't know which is worse, using an impact or this lol
I just finished doing my Camaros oil filter this way got a 100 more horse power to the wheel but for some reason it won’t come off 🤔
Literally dripping with sarcasm for all the keyboard warriors LOL
Don’t forget to put green loctite on the housing threads. If it’s your last day on the job anyways
LOL, I love watching Ray's videos.
😂
Never did this to my filter before, and I never had any problems with my oil filter leaking or any other problems! That’s just bizarre!
Ok😊
You just want to make people's heads explode? You are an evil, evil man.
And this, is how they do it at WalMart…
REEE!!!!!
You forgot the 1.2oz of relative bearing grease, for the GPS…
Damnn I’ve been doing it wrong my entire life wait on the drain plug what should I put on it?
When ever I change my oil filter I always tighten the new one as tight at I can get it, the weld all around it twice just to make sure it’s secure
You know there has been idiots that have watched this and then done it lol
3 Cheers to the masses of the idiots on the internet. And this is your fault.
🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄
They learned this from you are idiot #1
Make sure you ugga dugga that drain plug real good and cross thread it. Use that lock tight too.
wtf are you doin…… xD
Torque spec 400 ft/lbs.
You forgot jb weld. And the air impact gun to torque it. Come on Ray. Lol. Love the humor. Thank you sir. Shane.
Awesome! I love lifetime oil filters. They save you a ton of $$$$
I guess we’ll be seeing this vehicle on “Just Rolled In” some time after 3000 miles.
It'll make your legs shake and make ya go crazeh.
Good job, that filter will last till the engine goes. Your never have to change it again.
😳
😂😂
Ray can I use the same thread look for my oil cap and dip stick, asking for a friend thanks 😂
Ohhh noooo 😂. Someone may miss understand and learn something wrong.
This video needed to be made
Better yet, weld the filter to the block too
This was a April fools joke for April' fools a while back, he just reposted it in short format.
I preload the filter with gear oil to keep the lash adjustment on point, so the wrist pins don’t seat against the rear main seal bearing cap timing chains..
And you know there will be someone out there trying this. Lol