Come along with Eric O. at the SMA shop as he replace a press in front wheel bearing in a Ford Fusion using the new (new to him) OTC Hub 6575 Grappler. This is a perfect edition to his older OTC Hub Tamer.
OTC (6575) Hub Grappler Kit: https://alexa.design/2p0sYl9
OTC 6575-1 Hub Grappler Puller: https://alexa.design/2nyKxM7
OTC 6575-2 Hub Tamer to Grappler Update Kit: https://alexa.design/2nyFaMU
OTC Hub Tamer Video (add on bearing) https://www.youtube.com/watch?v=m-jMUkK9TSQ
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/user?u=5031451
THANKS A MILLION!!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

48 thoughts on “Trying out the otc hub grappler 6575 kit”
  1. Avataaar/Circle Created with python_avatars WhyTheBloom says:

    I swear we need to make a rust belt special all data with all book times for how long jobs take when rusty as hell lmao

  2. Avataaar/Circle Created with python_avatars gRosh08 says:

    Cool! Thanks for sharing.

  3. Avataaar/Circle Created with python_avatars Mr99RICH99 says:

    Safety glasses please when showing things like this and simply replace the hub with the bearing , why go through all the extra work

  4. Avataaar/Circle Created with python_avatars Seblabombe says:

    Gosh that grinding wheel was close to your index. I guess you know what you're doing but it scared me a little LOL

  5. Avataaar/Circle Created with python_avatars Ron Salvail says:

    This guy is hilarious. Very helpful video thank you buddy

  6. Avataaar/Circle Created with python_avatars James Porter says:

    I really enjoy watching your videos, you do a great job and aren't big headed at all. All the best to you

  7. Avataaar/Circle Created with python_avatars O.G. Navations says:

    I am a fan of pulling the spindle and using the press to get them out and put back in………usually the fastest way i have found

  8. Avataaar/Circle Created with python_avatars Phillip Lopez says:

    A knife edged bearing puller plate is in order.

  9. Avataaar/Circle Created with python_avatars William Morris says:

    Idda used a grinder wheel and tried to cut a notch in the race. But Iโ€™ve split those with grinder wheels then used a chisel to bust it on the split

  10. Avataaar/Circle Created with python_avatars Keeping Up says:

    A slide hammer? That would be Toy Story 5.

  11. Avataaar/Circle Created with python_avatars FireoftheGreeks says:

    Honestly you should have bent the shit out of the backing plate just for old times sake LOL.

  12. Avataaar/Circle Created with python_avatars 1mantisco says:

    This can all be yours for the low low price of $571 ๐Ÿ˜ƒ yeah… ๐Ÿ‘

  13. Avataaar/Circle Created with python_avatars Melanie Branton D.V.M. says:

    Sorry, just saw the glasses around 16 min

  14. Avataaar/Circle Created with python_avatars Melanie Branton D.V.M. says:

    No safety glasses and fingers too close to cut off wheel!

  15. Avataaar/Circle Created with python_avatars William Mason says:

    I got the older one just got the new one for the tool to get the hubs off and the update pieces my older one doesnโ€™t have

  16. Avataaar/Circle Created with python_avatars William Kiฤบl says:

    Iโ€™d be able to remove ten of those outer races off the hub by the time you gave up with pullers
    Slice a groove I. The fuckin thing with a cut off wheel
    Large cold chisel in the slot
    Hit chisel with mini sledge and it splits the race
    Pull off hub with fingers

    NEXT

  17. Avataaar/Circle Created with python_avatars Nearly Normal says:

    Great tool only $597.00 get yours today!

  18. Avataaar/Circle Created with python_avatars Franรงois Monast says:

    Excellant job.

  19. Avataaar/Circle Created with python_avatars Sergeant Masson says:

    Don't need no stinking OTC hub puller. While this guy is doing his, mine would already be back on the vehicle done.

  20. Avataaar/Circle Created with python_avatars Scotty O says:

    Do yourself a favor and just remove the steering knuckle and get it pressed out. It's a 20 minutes job. You'll save a ton of grief

  21. Avataaar/Circle Created with python_avatars Jason says:

    very nice tool

  22. Avataaar/Circle Created with python_avatars Martin says:

    Snap ring install and no safety glasses? You saw what happened when it goes flying. They dont make replacement eyeballs……. ๐Ÿ‘๐Ÿ‘ But great video!

  23. Avataaar/Circle Created with python_avatars Mike Castleberry says:

    Replace the whole thing

  24. Avataaar/Circle Created with python_avatars Corsairforu says:

    Before you found the screw I went toward the start and saw it wasn't in its spot, l wonder if anyone else did.

  25. Avataaar/Circle Created with python_avatars Bruce Sarnowitz says:

    I think your videos are awesome but please wear eye and ear protection.

  26. Avataaar/Circle Created with python_avatars Christopher Kolb says:

    I've seen a video of a guy using a torch to heat the race wile spinning the hub on the vice and the race expanse and falls rite off id like to try it some day seems ezey but it could have been movie magic .

  27. Avataaar/Circle Created with python_avatars Sonic 7 says:

    I would drive 10 hours from Queens to have this guy work on my car.

  28. Avataaar/Circle Created with python_avatars Norm Sebby says:

    Not even using a vice to hold work or a hyd press to reinstall….sheesh….

  29. Avataaar/Circle Created with python_avatars Norm Sebby says:

    Respectfully, once again you are warping the brain of viewers expecting good methods…..where is your bearing puller and your hydraulic press….??

  30. Avataaar/Circle Created with python_avatars ** says:

    Man, using the angle grinder right next to your fingers made me really nervous, reminds me of all the safety videos where they slice, cut, and electrocute wieners. Use a vice, be careful with your wieners!

  31. Avataaar/Circle Created with python_avatars Nick Malone says:

    No grease new bearing ?

  32. Avataaar/Circle Created with python_avatars Bill Bird says:

    Ppe

  33. Avataaar/Circle Created with python_avatars fentonport says:

    Can that be done without unhooking the ball joints ?

  34. Avataaar/Circle Created with python_avatars NorCal says:

    Was there a snapping on the other side of the bearing also?

  35. Avataaar/Circle Created with python_avatars G W says:

    GOOD JOB!! GOOD ATTITUDE !

  36. Avataaar/Circle Created with python_avatars ExtremeRecluse says:

    I bought a Lexus from an old lady in Los Angeles. Not a bit of corrosion. Got a one way $50 ticket to Vegas from Detroit. Planned on driving home in a 2003 Camry. Got a 2007 ES350 instead. Smooth ride.

  37. Avataaar/Circle Created with python_avatars sammyfani says:

    South Main Auto Repair LLC LoL WTF idiot

  38. Avataaar/Circle Created with python_avatars Denise Kobus says:

    I like the much simpler square tube with the flange rhat bolts to the Stud bolts.give a big hit a d it's off.

  39. Avataaar/Circle Created with python_avatars Chris Johnson says:

    In the UK, we have 40 words for rust.

  40. Avataaar/Circle Created with python_avatars Dogday says:

    Glad my 08 charger was so easy to change the front bearings

  41. Avataaar/Circle Created with python_avatars allyg2510 says:

    nice to see a proper mechanic, if that was taken to most garages in the UK they would have wanted a new hub and stub axle, there are not many mechanics left anymore only 'Fitters' ,well done

  42. Avataaar/Circle Created with python_avatars Leslie Horwinkle says:

    See it? I felt it.

  43. Avataaar/Circle Created with python_avatars Michael Fries says:

    Need to know if that press kit works for a 2014 smart fortwo pure

  44. Avataaar/Circle Created with python_avatars ricky brown says:

    Hi Eric. I use a small cut wheel & grind side ways on the race. Once you get most of the way through just put a chisel in the cut & hit it with a hammer & she splits enough to slid off. Just another way to approach it. Love your videos. Watch them a lot. You are very good with electrical issues. Keep up the good work

  45. Avataaar/Circle Created with python_avatars slimdevil27 says:

    Cut a diagonal slot across the bearing race with a cutoff wheel. Insert a chisel and smack it with a hammer. The race is hardened steel and will crack the rest of the way through the slot you cut. Insert a flat blade screwdriver into the slot/crack and twist it slightly and the race will come right off. Quick, easy and no damage to the hub.

  46. Avataaar/Circle Created with python_avatars Jarco101 says:

    Thanks for the education

  47. Avataaar/Circle Created with python_avatars 61spindrift says:

    So it appears time you actually worked on removal/installation of bearing, of course including time spent to put car on lift, is about 45-50 minutes. I would assume you labor rate is maybe 80/hr. That would mean if I bring you my car you will charge me about $60 labor. Oh and I have already bought my bearing so no need to add that charge. Does that sound about right? The next phone call you hear is me so I can make an appt. I don't want to do this job in my driveway and for $60 I think is fair. Thanks

  48. Avataaar/Circle Created with python_avatars Tony Karata says:

    My old man could usually beat the shit out of it in and out and the bearing is bad again in 20 mins again !!!!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.