A video describing the process of removing and replacing the water pump on a 1993 G20 Chevy van with a 5.7 liter. Real simple to do just not a ton of room to work is all.

50 thoughts on “Water pump on chevrolet full size van”
  1. Avataaar/Circle Created with python_avatars Glen Hill says:

    glad you got big garage. I have small garage full of tools soo I work outside in the rain.

  2. Avataaar/Circle Created with python_avatars Gyo Orozco says:

    Gracias amigo no es el mismo vehículo pero me ayudaste mucho, gracias maestro👍

  3. Avataaar/Circle Created with python_avatars Wayne Akins says:

    I used grease and vaseline to put a water pump on

  4. Avataaar/Circle Created with python_avatars Artatexture says:

    Thanks for the video, i'm subscribing!!

  5. Avataaar/Circle Created with python_avatars Sharon Mckinney says:

    What size motor is in the 1997G10

  6. Avataaar/Circle Created with python_avatars Sharon Mckinney says:

    What year did Chevy quit making the G10 van

  7. Avataaar/Circle Created with python_avatars Bismarck San Diego says:

    hammer scissors ! DIBS ON PATENT

  8. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Great work Eric O vans are always a pain Easy Water pump Job @SouthMainAutoRepairLLC

  9. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Good to see ya Dr O hope your doing Well Mr Eric O @SouthMainAutoRepairLLC

  10. Avataaar/Circle Created with python_avatars Blair Beardsley says:

    Thank you so much im living out a 1988 chevy g30 rv and you literally saved my ass thank you so much for all the details and easy explaining all through the entire job.

  11. Avataaar/Circle Created with python_avatars fixed game says:

    wow she's a beaut

  12. Avataaar/Circle Created with python_avatars Mr. Roman says:

    We are grateful for this video. Believe me. I subscribe. Great job and thanks.

  13. Avataaar/Circle Created with python_avatars leroy wauneka says:

    I want to know how to replace the water pump on a 1995 chevy conversion van G-20…

  14. Avataaar/Circle Created with python_avatars j horton says:

    My daily driver is a '93 Chevy G20 conversion van with 135K on a 4.3.

  15. Avataaar/Circle Created with python_avatars Andrew Perry says:

    This was one of the first "suggested videos" I saw when I jumped on youtube tonight. Good stuff.

  16. Avataaar/Circle Created with python_avatars Brent Owen says:

    Hey, at least you didn't have to take the dog house out.

  17. Avataaar/Circle Created with python_avatars Jayson Burns says:

    I had tha same thing happen on my water pump on my 2000 gmc jimm with the 4.3 vy engine…mine had 3 holes rust threw at the same time…

  18. Avataaar/Circle Created with python_avatars adam0U812 Davies says:

    You had a camera person back then ?
    You've come a long way.
    This is hilariously fun to watch.

  19. Avataaar/Circle Created with python_avatars Don Bullock says:

    I had a 85 conversion van. AC never did work, had the trans rebuilt, alternators 3 (Autozone) and a water pump. Burnt a hole in the brake line changing the battery once. Brazed it shut while it was running. Ran great, sold it to a guy at a carnival.

  20. Avataaar/Circle Created with python_avatars ronnie cardy says:

    Vans are a bear 🐻 to work on is so true

  21. Avataaar/Circle Created with python_avatars duzitickle says:

    Man, the whole reason I was watching is bc my fan shroud wont come out. 😭

  22. Avataaar/Circle Created with python_avatars Ronald Poddig says:

    I have to replace the water pump on my 97 Ranger. It's all apart. Broke a bolt on the thermo housing.

  23. Avataaar/Circle Created with python_avatars RockvilleMike says:

    I have an 84 GMC Vandura Van and whenever I have to do a job on the engine like replace a water pump or an alternator I remove the upper latch on the hood. After bumping my head about three times on it I decided to just remove it until my project is done. Only two bolts, Good for your head. …………………………..'Just saying Mike

  24. Avataaar/Circle Created with python_avatars John Doe says:

    customer did not want the coolant system flushed..=bad move..a perfict time to replace hoses..thermostat..inspect radiator.. a system is only as good as its weakest point

  25. Avataaar/Circle Created with python_avatars tlak says:

    Simpler thing to do with the latch is take a pencil and outline the mounting plate

  26. Avataaar/Circle Created with python_avatars Efrain Torres says:

    Ding dong

  27. Avataaar/Circle Created with python_avatars Kent Byers II says:

    Any advice on 88 gmc 2500 with the bracket holding the top left bolt in place. Looks like the ac compressor and air pump have to be removed.

  28. Avataaar/Circle Created with python_avatars Don Munro says:

    Love the hi tach spray. I use it all the time. Another trick with it is to spray a bunch on your hand and run for the bathroom. Looks like blood, freaks out the secretary

  29. Avataaar/Circle Created with python_avatars Mike Mardis says:

    You’re cool with laying that viscous clutch down?

  30. Avataaar/Circle Created with python_avatars Shane Harrison says:

    Different

  31. Avataaar/Circle Created with python_avatars Terry Garrett says:

    I'm getting ready to change the water pump on my 1991 GMC VANDURA.
    Thanks for this video and your little short cut tricks!

  32. Avataaar/Circle Created with python_avatars dennis secor says:

    Great video i have to do an express van 1500 4.3, should be the same, thank you!

  33. Avataaar/Circle Created with python_avatars Steve McKennon says:

    great work. made it look simple.

  34. Avataaar/Circle Created with python_avatars Vincent Higgins says:

    Got yourself a camera man now?

  35. Avataaar/Circle Created with python_avatars monsterq6 says:

    Listening to a lil Paramore in the shop lol I love that song that you guys had playing

  36. Avataaar/Circle Created with python_avatars Jürgen A. says:

    thank you for sharing this video… it is very helpful!!! greetings from germany and thanks again!!!

  37. Avataaar/Circle Created with python_avatars beverly koehler says:

    you really did an excellent job of explaining each step in the process and made this fairly difficult job look very routine. thanks for sharing these valuable tips and taking the extra time to video this procedure. also i would not have thought to put the teflon paste at the end of the 4 bolts going into the pump until you explained they were also going into the water jacket. reading it in a haynes manual is just not the same as hands on experience.

  38. Avataaar/Circle Created with python_avatars Gary Chester says:

    Show me the shroud removel

  39. Avataaar/Circle Created with python_avatars John Doe says:

    'Vans are my least favourite vehicle to work on'
    I hear ya. I own one to get my dirtbikes where they need to go. Sometimes I want to just rip every piece of cowling, cover and panel off the stupid thing, weld a frame for the seat and drive it with the window down so the fumes don't kill me. It would be a treat to work on the stupid thing just once without having bleeding knuckles, crushed fingers or chafing rash hahaha!

  40. Avataaar/Circle Created with python_avatars Jacob Blackburn says:

    I heard there’s a pressure valve behind the water pump. Is that true?

  41. Avataaar/Circle Created with python_avatars Adb Infish says:

    Great video, very helpful. Thanks

  42. Avataaar/Circle Created with python_avatars ford nut says:

    Scrap yard material. Lol

  43. Avataaar/Circle Created with python_avatars Patrick McNamara says:

    Excellent…my exact same van…exact same leak location…better than the chick in the blue skirt…sorta

  44. Avataaar/Circle Created with python_avatars Slik Rhodez says:

    Merry Christmas!!

  45. Avataaar/Circle Created with python_avatars Tony Stewart says:

    Pita! G-van…..I remember when they rolled off the carrier's,,they sucked new….crush it….

  46. Avataaar/Circle Created with python_avatars Hvy Chvy G20 says:

    Had to do a water pump on my 93 G20 this past summer. Original pump. Wasn't that bad of a job. Much easier than the 94 B250 Dodge van that I had.

  47. Avataaar/Circle Created with python_avatars ORESTINO says:

    My Dad was a mechanic in the 70’s and He would make gaskets using ball peen hammer. He also used a product called “Indian Head” Copper spray on head gaskets and all other gaskets.

  48. Avataaar/Circle Created with python_avatars Carl Byington says:

    Hey Eric, I'm thinking you know about keeping fan clutches vertical so they won't suck air into the seal, and weaken the clutch…….

  49. Avataaar/Circle Created with python_avatars Michael Martinez says:

    Damn this is old. Before he got comfy comfy with the camera on.

  50. Avataaar/Circle Created with python_avatars Dick Mick says:

    Just did this job. Had the factory pump on it still. How is that for longevity? And the back cover wasn't the leak it was at the shaft.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.