In this video I bring you along as I replace the rear wheel bearing on a 2012 Ford Fusion FWD 2.5 I also noticed when the lady was in the it had a cracked wheel! Time to throw some parts at this little guy. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: https://www.patreon.com/southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
https://teespring.com/stores/the-sma-store
If you don't like Patreon feel free to use the "PayPal Me" link: https://www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
https://www.amazon.com/shop/southmainautorepairavoca
AES Wave Automotive Diagnostic Tools: https://www.aeswave.com/cart.php?m=affiliate_go&affiliateID=2525b91fc8e906e8215984074c9d9e8f&go=https://www.aeswave.com/Miscellaneous-p9347.html
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

There viewers welcome back to the south main auto channel. That's a 2012 ford ford fusion. It's got the bek25. It's got a bad wheel bearing.

And it has a broken wheel. So the lady brought it in to check out her noise. And i noticed that her wheel was cracked on the inside beat. So we got our new used wheel probably smacked the pothole with it and broke that uh.

But this bearing here. I don't know if you can hear or not. But it's pretty loud really loud driving down the road uh. So we're gonna get after that and then we gotta see where her exhaust leak is we get our pull pretty easy bearing to change.

Um. Let's see where are we here folks. We have to pull the caliper bracket off and you've got going through this little hole up here with your 14 mil. That's where one of the caliper bracket bolts resides try to do it without looking hopefully.

I've got the right size here. I've got to look uh. I think i grabbed the wrong side it feels a little loose. I think it might be a 13.

What did i grab what a ding dong try this again with the correct size hopefully. There we go that feels a little better oh bring this little fella and she's a screamer. The other one here you just kind of give that one the old fashioned that one comes in right from the top nothing real fancy there trying to give her the one handed handy. While i hold on to you there we go so there's that so once you crack that baby loose.

We can get back up in here with the air ratchet and zippy zap. It right out of there that's a little snugger than i hoped it would be make sure the parking brake cables off all the way here just be on the safe side that might have been just tension from everything holding over so it's got screwy pistons in it so you can't just grab the caliper and you know tweak it back down in this style anyways. Make sure the pads are all wiggly here. Okay.

The brake job doesn't look that old i just want to make sure the pads aren't seized in the bracket because if they are then well you know now you've got to tear the whole thing apart and service the rear brakes uh may have come off a little difficult because of a little bit of a rust ridge. There so now we need to grab a t. Something t25 probably or t30 maybe a t35 or a 40. What do you think they are boom.

First try t40 just like my first it's like my first guess whoa hey hey hey hey that one slid right out jerk oh that's all you want to be huh. I'll beat you i've seen a turn. Oh batman plays a little crusty. Oh piece of the batman plate just hit the floor.

There we go little pop pop get you out of there there's that impact driver classic move. We're gonna slip the rotor off oh it wasn't it was just a chunk of rust off the backing plate. She still sounded like a rock gotta get a little cap off there. There's that you can use a screwdriver chisel chainsaw.

Whatever you got we gotta take that nut off. Oh yeah. First try. It is the ever popular 35 mm.
Giddy up there. It is why can't they all be this easy gonna blow the dust off it we're gonna give it just a little spritz up fluid film. We just want to keep the bearing race from getting stuck on the shaft in the future. If your shaft's real rusty.

The old rusty shaft uh you're going to want to take like a little scotch brite brillo. Pad. Scotch brite pad. There and take and shine that up and then slip that baby on and that's pretty much all you have to do always install a new lock nut.

We'll go get the dugga specs for it and see what they are snug it up crimp it down don't just take and ram it back to where it was even though it may go back to the dimpled spot. Always you know torque it to manufacturers spec. Because you can see right now. We're at the dimpled spot.

But we may move past it just slightly. We'll go look it up it is 2 280 inch pounds. There it is 2280 inch pounds 490 foot pounds for you folks to do things and foot bouncing. See.

Where i dimplined it up here. So be warned get your dimple making device. Give her a whackeroo. So it doesn't want to back itself off get.

This slow guy uh. No real need to you know take and jam. This whole full of grease now. This is an open bearing design.

But hold on so you know just be cautious. If you're putting you know packing that thing full of grease you'll make sure. It's compatible with the bearing grease that's in there so now we're going to take and whack that baby on there boom. Shiny looks good now before you go slapping your rotor on make sure you know that it's clean on this on this portion of it get all that dust and dirt junk.

There because you don't want the rotor to have the going on a row like this give you the wobbles so if there's rust and crap in there you have to clean it out good of course blow on it in case. It's asbestos you can get it up in the air for what it's worth we give it a little shot of the fluid film. We realign our rotor put these screws in as tight as you can possibly get them. Especially if you're taking it to a shop to have work done on it just kidding just kidding finger tight's really all they need uh and if you've lost them don't you know forget about it because the uh.

The wheel. Believe it or not will hold the rotor on so we very gingerly put them in for the next fella and then we've got to get the caliper back. Oh you stink feels like it started then we'll take and run those two bolts down of course. We'll uh torque them to factory.

Specs also wheezy all better. What's up miss. Though. Oh you know making bacon yeah.

Getting the bacon actually those are cute little potatoes. What are you making for us. What are you making for us. This is for dinner oh i'm still getting leftovers from lunch still leftovers.

Yeah. I'm gonna be all pulled pork out afterwards work so now you're eating that you got broccoli. What's this thing uh that is a mango that your son wanted. And he's not gonna eat it i don't know if it's like that not a big mango guy myself they're good they're they're really sweet like you yeah well.
Thanks thanks for everything you do for us. Let us. Know. When lunch is ready almost forgot to say hi to luna.

Hi. Luna. Hi. How are you doing kitty huh.

There's a little girl is here now we have to go address this the dreaded crack uh no i'm not gonna weld. It the rim's bent too so there food so um not a sponsor. So so oh do i foreign uh well that was easy one more bent wheel broken wheel. Now we gotta see if we can find that exhaust leak and let's say you're gonna torque that wheel sounds like it's up here there it is baby you got your classic resonator.

So i have to put a resonator on it at least. It's not the flex pipe. These things can get be a little bit of a pain to change. It's kind of a few of these like this bracket up on these things will rot out you gotta get that right from the board.

But probably not gonna be long for the world. I see it's looking a little rough there not leaking yet that sucker's all rusted out won't be long for the world will it folks how's it going. It's done am i hungry. It's i 1205 answer.

The question. Oh not really i've been meaning to ask. You oh. Dear you're from tennessee huh.

Really. Only two people in this room. You can't really say that okay no you can't yeah. I can't go i'm the only person you can see girl you're the only ten.

I see you've ruined my whole thing have i used that one on you before oh you think yeah really so i'll come with something new. Okay okay 168k on yo girl and no lights on the dash. That's pretty good back up a little bit here. So that's it for this one folks uh.

Easy peasy a lemon squeezy uh. If you're working on the wheel bearing on these it won't come off the shaft. Just you know tap on it a little bit. They'll typically you know come right off.

I can't say in my experience. Doing these uh personally. I've had the wheel bearings get stuck to uh the spindle at least on these styles on the fords. They usually always come right off the only thing is i have had people not to mention any names.

Josh uh. Try to tap those wheel bearings back in when they're not going precisely on and they do fit pretty precise with just a few you know maybe a thousands of clearance so make sure you you clean and lube the shaft before you go slipping around and if it doesn't go on nice and easy don't don't tap it just calm down okay and uh. I think that's all i had to tell you oh no i don't weld wheels. I don't straighten wheels.

I don't do anything like that wheels are pretty cheap um. So we just get them from the salvage yard and the car this old the wheels aren't pristine so if you get one that has a few nicks on it you know not a big deal and uh gotta get rid of the crack. So don't you do crack. And don't be cracked out go in that comment section.
The questions the comments the insti the facebook we're on patreon teespring all that stuff we're everywheres we're like your mother we know everything and we're everywhere and just remember viewers. If i can do it you can do it thanks for watching.

96 thoughts on “Ford fusion: rear wheel bearing a cracked rim”
  1. Avataaar/Circle Created with python_avatars djsi38t says:

    wheels are cheap……ah that rim is easily 100 bucks at the salvage yard.

  2. Avataaar/Circle Created with python_avatars Scott Kaercher says:

    Needs new rotor that 1 is all grooved up and no good.

  3. Avataaar/Circle Created with python_avatars LadyAnuB says:

    Mangos are delicious. The golden ones are even better, ataulfos are this variety.

    For some reason, I don't imagine Eric O's a plumbers crack kind of man 😅

  4. Avataaar/Circle Created with python_avatars Max's Garage says:

    love the asmr section haha

  5. Avataaar/Circle Created with python_avatars Andrew Thomason says:

    That Luna has life figured out.

  6. Avataaar/Circle Created with python_avatars Michael Smith says:

    Would've liked to hear that pop of the bead seating, but you cut it off!

  7. Avataaar/Circle Created with python_avatars Hurtydwarf says:

    That adhesive prep would have been great when I worked in auto at Walmart. The amount of time having to fight with cleaning the filthy rims that came through only to still have the weights fall off when balancing.

  8. Avataaar/Circle Created with python_avatars Peter Allen says:

    Every time you show under one of these vehicles all I want to do is start poking and scraping all that flaky rust off. It drives me nuts but I understand why you leave it alone. 🙃

  9. Avataaar/Circle Created with python_avatars Sage TL says:

    Another great video Eric. I work at a tire and lube shop, cracked rims are more common than you think because of how thin the rims are. Use a lot of your videos for quick references. Thank you for all you do.

  10. Avataaar/Circle Created with python_avatars Michael says:

    490 ft lb?…..

  11. Avataaar/Circle Created with python_avatars Peter Allen says:

    Clearly you are in a better mood today then a few days ago. 😃

  12. Avataaar/Circle Created with python_avatars andrew mather says:

    Because of you and your videos and everything I’ve learned from you I now work in a garage in England and I have just one question, how on earth do you make changing a tyre look so easy? I’ve only been doing them for a few months and I still haven’t got the hang of them!

  13. Avataaar/Circle Created with python_avatars Ironnerd says:

    My Granddad would love that balancer. I can see him hunched over a Bear wheel balancer with his thumb and pinky on the spindle/handle. Sorry, I have no clue what that would be called, but give me one, and I could balance a tire. Shove it under, clamp the hub thing on, and spin it up with the foot pedal.

  14. Avataaar/Circle Created with python_avatars Mike says:

    Your grimy glove left a massive dirt stain on the head of the cat lol

  15. Avataaar/Circle Created with python_avatars PickleRix says:

    Oh goody. A wheel bearing video.

  16. Avataaar/Circle Created with python_avatars Michael Madafferi says:

    I guess you did not like the bibs ! I saw you wear them once and never again.

  17. Avataaar/Circle Created with python_avatars Gary's Garage says:

    Lemon squeezy and don't do crack. Nice to see the torque wrench.😉.

  18. Avataaar/Circle Created with python_avatars Scott Pinkslam says:

    These fusions are always completely beaten on with their brakes body paint etc. kinda like nissan altimas in my opinion.

  19. Avataaar/Circle Created with python_avatars Patrick Zadd says:

    Eric
    your customers are very fortunate to have you as their mechanic

    (cuz you’re genius!)

  20. Avataaar/Circle Created with python_avatars James Kim says:

    BIG OIL MARK ON THE HEAD……

  21. Avataaar/Circle Created with python_avatars Roy White says:

    That rear rotor looks shot.

  22. Avataaar/Circle Created with python_avatars Coldcustard says:

    She needs new rear rotors,

  23. Avataaar/Circle Created with python_avatars Alexander Cahoulan says:

    Just got finished with a 13 hour double shift from a restaurant . Saute. In 100 degree heat. I was in a bad state of mind. Until I saw this. watching/listening to Eric work and Mrs O's smile especially. Hard to stay negative seeing that.

  24. Avataaar/Circle Created with python_avatars kurt nulf says:

    That rotor is trash look at all the grooves it needs to be turned down or replaced it will chew up the pads

  25. Avataaar/Circle Created with python_avatars Trey Cook says:

    No crack here. I'm all jacked up on Mtn. Dew!

  26. Avataaar/Circle Created with python_avatars TinyTim says:

    Can I get a link on that bead sealer? Or perhaps name/type? What I use is very running, makes a mess every time.

  27. Avataaar/Circle Created with python_avatars Mike Oden says:

    So much iron going to waste in New York via the salty hiways lol

  28. Avataaar/Circle Created with python_avatars Paul Bush says:

    The moral of this story is don’t get bent and drive with crack

  29. Avataaar/Circle Created with python_avatars Thomas Ryan says:

    What happened to the overalls? Did you get a complete matching set for the entire family?

  30. Avataaar/Circle Created with python_avatars Morse Code Reviews says:

    That outro had me crackin up

  31. Avataaar/Circle Created with python_avatars Robert S. says:

    What a beautifully easy bearing to remove…..As someone who lives south of the salt belt, I always enjoy watching you northern folks with all the fancy tools to deal with that nonsense. But this one, just gave you a nice easy day. No torches or grinders required today.

  32. Avataaar/Circle Created with python_avatars irgski says:

    SMA don’t do mufflers?

  33. Avataaar/Circle Created with python_avatars Almost Zen says:

    Mr. O, you got grease on Luna's head.. 🤣😂🤣😂

  34. Avataaar/Circle Created with python_avatars Its Nacho says:

    The “dooloodo” awfully sounds like Rainman Rays phone dooloodo🤔.

  35. Avataaar/Circle Created with python_avatars Billy Smith says:

    HAhahahahahahahahahahahahahahaha, love the video….you "crack" me up!!!!

  36. Avataaar/Circle Created with python_avatars Triggerman1976 says:

    I despise sticky weights.

  37. Avataaar/Circle Created with python_avatars Kyle Q says:

    Is there ever an easier wheel bearing to do in the history of wrenching? That was silly easy.

  38. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Good repairs Grest video Appreciate The Entertainment Eric O @SouthMainAutoRepairLLC

  39. Avataaar/Circle Created with python_avatars K4x4 Map says:

    funny

  40. Avataaar/Circle Created with python_avatars Lucas Ellyson says:

    Love when he pounded on the sharp end of the chisel with the hammer. Like something I’d do

  41. Avataaar/Circle Created with python_avatars springfield45 says:

    Pretty good – 2 for 2 on first guesses 🙂

  42. Avataaar/Circle Created with python_avatars loeridr6792 says:

    Literally laughed out loud at the , "Ol' rusty shaft." I really wish all bearings came out this easily!

  43. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    That is a super load Wheel Bearing wish they were all that easy to remove and replace 😕 Eric O @SouthMainAutoRepairLLC

  44. Avataaar/Circle Created with python_avatars Jim Bassett says:

    ford fusion, rear wheel bearing, when you took off the tire a semi was going past your garage same time while working. when a lug was taken off it was shifting gears and it while the air gun. I thought it was a new sound effect that fitted in, but I was wrong. I just liked it. at .33 seconds in.

  45. Avataaar/Circle Created with python_avatars David Wildridge says:

    Great words of encouragement Mr. O. We will keep trying.

  46. Avataaar/Circle Created with python_avatars Terry Long Sr. says:

    I'm guessing the owner didn't want new rotors because those look like sh*t to me!

  47. Avataaar/Circle Created with python_avatars Mark Eckelkamp says:

    I laughed "oh yeah 1st try" I find it on the 5th try, which was always my 1st but I didn't use it but wanted to.

  48. Avataaar/Circle Created with python_avatars mike fedele says:

    What are you using for tire lube? It almost looks like grease does it do well will the road salt?

  49. Avataaar/Circle Created with python_avatars DBLAIR says:

    I have never seen anyone beat on the blade end of a chisel before. Interesting.

  50. Avataaar/Circle Created with python_avatars Cameradoctor says:

    The tyre ( yes, that IS the correct spelling 😉 ) change with no voiceover felt like watching one of those Asian restoration videos 🙂

  51. Avataaar/Circle Created with python_avatars lvsqcsl says:

    I have never done anything to the front wheel bearings on my Marquis and it is 27 years old with 430,000 I wonder if they are similar? Great video!

  52. Avataaar/Circle Created with python_avatars Jacque Jecker says:

    Not questioning your judgement here because you are always very thorough, but one question, Why did you not recommend to turn or replace the rotor. To my unprofessional eyes it looked like trash.

  53. Avataaar/Circle Created with python_avatars David Streling says:

    that rotor looked like crap

  54. Avataaar/Circle Created with python_avatars Jim Kish says:

    How did I forget to stop by! Just got back from camping trip with the family, Letchworth, Four Mile Creek, it was first time for us doing some NY camping. Beautiful area! Peaceful. This bearing/hub came out so easy I think even the bluebirds were singing the whole time for you. The only surprise was the dirty mits while surveying the kitchen. I have heard of ,'God made dirt and dirt don't hurt' , but when it comes to the grease scene, I think I have to pass.

  55. Avataaar/Circle Created with python_avatars Mike Chiodetti says:

    Nice fix. To bad this car's not long for this world.

  56. Avataaar/Circle Created with python_avatars Tracy Childs says:

    you better quit pulling your pork 😘

  57. Avataaar/Circle Created with python_avatars Richard Gill says:

    👍👍

  58. Avataaar/Circle Created with python_avatars ToughAncientSpark says:

    How was that rim cracked and still hold air?

  59. Avataaar/Circle Created with python_avatars ToughAncientSpark says:

    Ford Fusion: Yet another fine throwaway car from the fine Ford Motor Company!😂

  60. Avataaar/Circle Created with python_avatars Castinn says:

    "Always install a new lock-nut" @5.59 "Don't just take and ram it back to where it was, even though it may go back to the dimpled spot" If it is a new 🤓nut, how could it go back to the dimpled spot?🤓 Were you reusing the old nut?

  61. Avataaar/Circle Created with python_avatars BigJjames93 says:

    Like how ford uses a big ol 35mm axle nut for the fusion, but a littlleeee baby I think 13mm? On some of there truck front axles.

  62. Avataaar/Circle Created with python_avatars Jon says:

    Salt potatoessss

  63. Avataaar/Circle Created with python_avatars ToughAncientSpark says:

    What is it with Ford and their shitty rims?
    I had a 1992 Ford Taurus wth a rim that actually rusted through and wouldn't hold air.
    Never had that on any other vehicle before or since then.

  64. Avataaar/Circle Created with python_avatars Eric says:

    Ten i see. That’s funny 😎🇺🇸

  65. Avataaar/Circle Created with python_avatars branding jomea says:

    Mrs O is hot. Nice job.

  66. Avataaar/Circle Created with python_avatars Travis R. says:

    nobody likes a rusty shaft! always polish it

  67. Avataaar/Circle Created with python_avatars Undecided Middle Ground says:

    Greetings from Ten-I-see.

  68. Avataaar/Circle Created with python_avatars Jon Miner says:

    Hi, Mr. O. I was happy to see a wheel bearing that was so easy to replace. There are still lessons to learn though. Mrs. O. does a great lunch! Thanks for sharing! Stay healthy!

  69. Avataaar/Circle Created with python_avatars Tiporari says:

    Mr O, can I suggest you wear some hearing protection while you work? They have units like sunglasses you can leave around your neck. As a musician and a mechanic my hearing is getting worse and worse over time. Might help save you some grief. It's Progressive.

  70. Avataaar/Circle Created with python_avatars Ed ogle says:

    Eric is Josh still working for you?????

  71. Avataaar/Circle Created with python_avatars MrRjsnowden says:

    Lube before you start….words to live by Mr. O!!!

  72. Avataaar/Circle Created with python_avatars Curt Odell says:

    is that goop on the rim tire lube or a bead seal of some kind ? most of the stuff i see around here is either a liquid or white paste for tire lube

  73. Avataaar/Circle Created with python_avatars thetable123 says:

    What's the black tire lube? I've always used the ruglyde from napanotasponsor. Always looking for the latest greatest.

  74. Avataaar/Circle Created with python_avatars burt bacarach says:

    Two Foci in one week!The Apocalypse must be near…

  75. Avataaar/Circle Created with python_avatars DIY Dave says:

    Whackeroo…I like that!! Thanks as always, Eric! 😁

  76. Avataaar/Circle Created with python_avatars Jake Tapeworm says:

    Mrs O looking very nice!

  77. Avataaar/Circle Created with python_avatars Joe Smith says:

    Way to kill a chisel.

  78. Avataaar/Circle Created with python_avatars danh nguyễn says:

    Not surprised by by how easy peasy you made this job look even if it was one of the easier jobs that you've shown lately. But my God the rust. Does NY age metal in dog years? I'm in the big Kaintuck Common Wealth which equals 0 to none and have seen many older vehicles 20+ whose undersides are just now getting their first layer of surface rust. That's a good PSA about the cracked rim.

  79. Avataaar/Circle Created with python_avatars Gone sideways says:

    We always said if it won't fit you need a bigger hammer !

  80. Avataaar/Circle Created with python_avatars Gone sideways says:

    You can tell that lady is a local!

  81. Avataaar/Circle Created with python_avatars Tommy Mohlén says:

    Pleasure as always Sir

  82. Avataaar/Circle Created with python_avatars Mark Munden says:

    what a shit spot for a carrier bolt

  83. Avataaar/Circle Created with python_avatars watajob says:

    Would you buy that poor woman a food processor already?!

  84. Avataaar/Circle Created with python_avatars scott miller says:

    Mr. O have you ever filmed a project that you have never seen before for and had a problem with it? Or most likely try it out first so you don't get stumped on camera! I'm not saying making a mistake, more like the old manufacturer doing something new that you have never seen before?

  85. Avataaar/Circle Created with python_avatars Kevin Miller says:

    My 99 Civic has the same style rear bearings. Easy to replace.

  86. Avataaar/Circle Created with python_avatars Rigo Castro says:

    The old man at my shop is the king of the one liners. He said he is like Horse 🐴 crap 💩. He is everywhere.

  87. Avataaar/Circle Created with python_avatars Mike from Clark County says:

    DPRNY

  88. Avataaar/Circle Created with python_avatars Cratecruncher says:

    "Don't do crack!" I'm 58 and can say without a scintilla of hesitation that I have never once done crack. Though who knows. Once I reach 80 I might need a boost to liven things up.😂

  89. Avataaar/Circle Created with python_avatars Mike King says:

    crack is whack!💪🏼🇺🇸💯SMA

  90. Avataaar/Circle Created with python_avatars Jake R says:

    How great would the world be, if everyone had a Mom and Dad like Mr. and Mrs. O?

  91. Avataaar/Circle Created with python_avatars Ethan's Profile says:

    Upper NY muffler?

  92. Avataaar/Circle Created with python_avatars curtis stewart says:

    Speaking of bolt torque I ask my dad how tight to tighten head bolts, he said “get them as tight as you can the tighten them another half turn”. I did break the first head bolt off. He lifted the head off and used his pocket knife to remove the broken of bolt. This happened many years ago. I always enjoy your videos, keep them coming. 👍

  93. Avataaar/Circle Created with python_avatars Michael O says:

    I must those pretend type Torx Bits cos when mine see an Impact Screwdriver the tips usually Snap Off making it so much easier to remove those countersunk screws! 🤭

  94. Avataaar/Circle Created with python_avatars RicH says:

    My daughter has ruined 2 rims and 4 tires on her 2011 Fusion Sport by hitting pot holes. Took photo of pot holes on two of them and got refunded by county.

  95. Avataaar/Circle Created with python_avatars John D S says:

    Well that was a nice one. Hey I watch some old 7 year old video where Mrs. O was working on her car because you didn't have time. She did a great job. Better watch out someone is going to swoop in and steal her from you. She's a keeper.

  96. Avataaar/Circle Created with python_avatars kj bunnyboiler6353 says:

    Not like you to have a job go that easy🤣🤣🤣

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.