You want, now you got it! Come along on this multi part series as Eric O. and the team at SMA replace a blown engine in this Chevrolet 1500 4x4 with a 5.3 V-8.
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the **ALL NEW** SMA A-Store and help support the channel! : http://astore.amazon.com/httpswwwy0837-20
If an SMA Video has helped you out please consider giving using the "support" link on our YouTube home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers @outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

47 thoughts on “Chevy truck engine – remove replace part i”
  1. Avataaar/Circle Created with python_avatars Hanson900 says:

    Priceless information here. As someone who learns from others mistakes or accidents, my AC lines were underload too. And going into this job blind its nice to be aware of things like jacking the transmission and just being ready with a plan, having the front tires off. Saves a lot of time, especially when you already spend a lot of time looking for stuff you put down in the wrong spot lmao

  2. Avataaar/Circle Created with python_avatars Cyclone patriot says:

    So is mrs.O your wife? I just started watching your videos lol keep up the good work I enjoy that you don’t just fix the problem you actually show how you find it as well

  3. Avataaar/Circle Created with python_avatars James Corbett says:

    Where did you pick up your engine from. I am replacing my engine as well. Right now I have it out sitting on the rotisserie and I've been searching for a new long block. To drop into my 2004 Silverado. But the wait time for me to get it is from 4 to 6 weeks out.

  4. Avataaar/Circle Created with python_avatars David Rasch says:

    I enjoy and learn from this extensive engine teardown. It shows parts and their use and TOOLS. Being an old(71) guy this becomes more important as I do not want to give up on my car(s) yet.

  5. Avataaar/Circle Created with python_avatars Dave Brosius says:

    How do you get a reasonable junkyard engine? Pick a truck who's backend was run over by a train, leaving the front untouched?

  6. Avataaar/Circle Created with python_avatars Arthur Neal says:

    Hi my name is Arthur and I'm working on a 2000 Chevy Silverado 1500 I took out the 4.3 leter V6 and I'm putting in a 5.3 V8 LS1 motor back in it everything lines up but I have a problem with some wiring it's the big thick Red wires there is about 6 to 7-8 of them I need some feedback so I can hook up my connectors that go under the fuse box to those wires so can anybody help me please

  7. Avataaar/Circle Created with python_avatars Victor Avila says:

    I’m going to pull my engine myself thanks for posting this I’m watching step by step this will be my first motor I am not a mechanic 😅😅😅

  8. Avataaar/Circle Created with python_avatars Justin Minardo says:

    This guy is slow 🐌

  9. Avataaar/Circle Created with python_avatars RJM says:

    I just moved the hood to the service position by relocating the spring arms to the rear bolt but I see you don't have high enough ceilings to do this and then raise the vehicle.

  10. Avataaar/Circle Created with python_avatars Rainy Days Roofer says:

    i have a friend that was reaching over and reving his engine and the fan blade on rhe motor came off and chopped his arm almost completely off they saved it but was a super scary accident ill never forget.

  11. Avataaar/Circle Created with python_avatars Sofa King Good says:

    " I gave him my 2 cents he bought it anyway ".. thats classic.. like screw your opinion I'm buying it….🤣🤣

  12. Avataaar/Circle Created with python_avatars Eric G says:

    Up north our trucks go down for rust not cause the motor so what we got is tons of spare motors at the junkyards and their pretty cheap

  13. Avataaar/Circle Created with python_avatars obed valdes says:

    Yeah keep doing what you are doing engine removal or engine rebuild

  14. Avataaar/Circle Created with python_avatars Andiar Rohnds says:

    so many things have to come together to make a proper and enjoyable mechanics channel… personality and ethics. thank you big-O

  15. Avataaar/Circle Created with python_avatars WannaKatana says:

    Would you ever take off the fenders for better access?

  16. Avataaar/Circle Created with python_avatars WannaKatana says:

    How do you keep track of all the bolts and fasteners? LOL

    Can someone with no experience swap an engine? I have a huge garage and will get engine host /stand etc. I swapped a V6 to V8 when I was a kid but nothing since. This is a 2009 suburban XLT 4 wheel drive 5.3L 4 wheel drive

  17. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Love the longer videos for sure I don't have an attention span for shorts that are around now to many subjects in a few minutes I enjoy the longer videos there more information unlike shorts you have to cram 15 plus minutes into a minute or less Good series Eric O aka Dr O @SouthMainAutoRepairLLC

  18. Avataaar/Circle Created with python_avatars gunga din says:

    Mrs O is one fine baby n snow balls making woman

  19. Avataaar/Circle Created with python_avatars Justin Case says:

    As Mustie1 says “we’re wrenching on some more old rusty junk” …

  20. Avataaar/Circle Created with python_avatars Hola! Disabled Vet 512 says:

    If you ever got to do an engine swap, keep the old , throw it on a stand and start tearing into it. It's a great learning opportunity and you might be able to just rebuild it and now you have a back up motor.

  21. Avataaar/Circle Created with python_avatars Team Phoenix says:

    It would take me 5 yrs to put all those parts, bolts, brackets & wires back in the right place.

  22. Avataaar/Circle Created with python_avatars OLD CAR JUNKY says:

    I like to see if I can do this or spend the ridiculous cash to have someone do it for me

  23. Avataaar/Circle Created with python_avatars Triplezero23 says:

    It sucks that some of the items on Amazon aren’t available

  24. Avataaar/Circle Created with python_avatars VideoNash says:

    thanks

  25. Avataaar/Circle Created with python_avatars Jack Jackson says:

    “Go down on this ole girl”
    He is killing ms & I don’t think any of it is intentional lmao

  26. Avataaar/Circle Created with python_avatars Jack Jackson says:

    OMG !!! Did he say “give it the ole reach around” LMFAO !!! 🤣🤣

  27. Avataaar/Circle Created with python_avatars Greg Gonzales says:

    My engine just blew in my 05 Tahoe. Dont know much about engines but after watching this I think I might be able to replace it by myself

  28. Avataaar/Circle Created with python_avatars Jimmy Favereau says:

    awEsome helper <3 😀

  29. Avataaar/Circle Created with python_avatars 521farmer says:

    Howdie this is Farmer Had My Own Garage Covid took it away doin my Own thing Now so Thks For Sharin this Hard to Find Any Video's that do this New Crap Needed to find Video on wiring and Ya Teaching old Dog New Tricks this new Stuff Hides A lot of It So That's Why Ya Got My Vote Subcribin to ya keep this Up Ya Got this P,S How,s Covid Doin down ther Bad As it is Down Here I,m in Canada Sk Cold Here Too

  30. Avataaar/Circle Created with python_avatars Theodore Turnquist says:

    I have leaned a lot watching your videos really enjoy your chanel

  31. Avataaar/Circle Created with python_avatars Linz McGeorge says:

    You need to properly cuss it out.

  32. Avataaar/Circle Created with python_avatars Linz McGeorge says:

    He said "cock" 🤣🤣🤣🤣

  33. Avataaar/Circle Created with python_avatars scott miller says:

    I know this is a few years later, and you have a bunch of new equipment! but I still think you should have some sort of ceiling mount gantry that can pick a motor out from bay 1, and be able to move it over to bay 2! get rid of that dangerous cherry-picker! You could have a four-post steel mount, from floor to ceiling, if the roof is not strong enough! you know those pickers can roll over when you least expect it! but you got the shop! You always say, work smarter! not harder!

  34. Avataaar/Circle Created with python_avatars Gspr mssr says:

    Eric, I just purchased a 1985 square body truck and needs a new engine. I found an engine and plan to swap them. What tools are needed for the job? Thanks.

  35. Avataaar/Circle Created with python_avatars Rick Rathman says:

    I'm also a big fan of the engine swap videos, I guess it goes without saying, but not for some of us, during the entire introduction you just kept saying the engine, just thinking ok but what engine is it? Maybe you will say later on what engine is in it and what are you replacing it with. Anyway I'll still be a big fan, I enjoy watching all your videos, I've heard you say you aren't a car guy, I find that kinda sad, I only say that cause you are so damn good at what you do, and I can only imagine the cars or trucks you could build. You do great work and I hope if you ever are trolled you don't pay it any mind, your skills are far superior to any of the commenters that think they know better, keep up the great work.

  36. Avataaar/Circle Created with python_avatars northislandnavalbase says:

    Tens of thousands cheaper than buying a new truck and the new ones are all junk.

  37. Avataaar/Circle Created with python_avatars Give Me Chocolate says:

    My friend and I swapped a V6 with a V8 as teenagers in 1980. Haven't worked on cats much since
    Is this a job I could do? I'm being told $9000 to replace. I can buy a remanufactured one for $2900 and now have a huge garage. I'd like to try and save $6000 doing it myself but am a little intimidated not having much experience lately.

    What are the biggest gotchas doing this?

  38. Avataaar/Circle Created with python_avatars Jim John says:

    Scrap the whole truck

  39. Avataaar/Circle Created with python_avatars zr1sparky1 says:

    Don't need the background music.

  40. Avataaar/Circle Created with python_avatars zr1sparky1 says:

    You know she loves you when she pelts you with a snowball when you aren't looking

  41. Avataaar/Circle Created with python_avatars NotMe says:

    My 2002 GMC 5.3L is on its second engine… First went for 325k.. second is at 255k and still going strong. They are solid truck motors as long as you change the oil every 5k and get rid of dexcool.

  42. Avataaar/Circle Created with python_avatars AngryDINGUS says:

    I always hate it when I go to start cooking a vehicle and realize I forgot to thaw out the bolts… wait…

  43. Avataaar/Circle Created with python_avatars Donnie W says:

    Love all ur videos

  44. Avataaar/Circle Created with python_avatars TimTimTimmay ! says:

    Odd that it lost that much oil pressure for that mileage. I've seen many non DoD 5.3s run for around 300k miles when serviced regularly.

  45. Avataaar/Circle Created with python_avatars Beto saves says:

    You're a pussy

  46. Avataaar/Circle Created with python_avatars Jim_Cathy McClendon says:

    I love these videos, you make us feel like we’re right there with you LOL

  47. Avataaar/Circle Created with python_avatars griff Hall says:

    wonderful loving playful marriage 💑

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.