Surplus electronic parts : https://epartsconnect.com
Stock and Crypto AI Prediction : https://stocksignalslive.com

Here's the video of the job, enjoy! https://youtu.be/rmZycjWtctc

50 thoughts on “Dealership fail!”
  1. Avataaar/Circle Created with python_avatars SpeedRunLabbo says:

    These are off that V6 charger ain’t they?

  2. Avataaar/Circle Created with python_avatars Tyler Wheeler says:

    This wasn't a dealership issue for me but I have a 2016 dodge dart and those damn things have the 2 piece lug studs. All but 1 came off no issue when I was doing a brake inspection that last damned one swelled up and the cap keept spinning on it no matter how much I tried. Luckily I had a sharp chisel to remove the chrome cap with and freed the tire. Imediatly ordered 1 piece lug studs and swapped everything out. With proper torque

  3. Avataaar/Circle Created with python_avatars JK RACING INC. says:

    WASTE OF UR TIME!!!
    Use the TORCH-(aka The blue wrench!) and make the customer replace the wheel!!

  4. Avataaar/Circle Created with python_avatars fordtechlife says:

    Ouch

  5. Avataaar/Circle Created with python_avatars Isaac Hiner says:

    Why didn't you weld them?

  6. Avataaar/Circle Created with python_avatars Little G GGG says:

    Yes take care of your balls

  7. Avataaar/Circle Created with python_avatars spiral revalution says:

    Now that's allot of damage great Scott how and why let them get that fucking bad

  8. Avataaar/Circle Created with python_avatars Rick Taylor says:

    Word of advice…..replace those shitty capped lug nuts before that

  9. Avataaar/Circle Created with python_avatars Michael Olson says:

    "And they'll take care of you"

  10. Avataaar/Circle Created with python_avatars Matthew Curschmann says:

    I use a torch

  11. Avataaar/Circle Created with python_avatars Zen McMaster says:

    I know there was a wheel between all that I want to see the aftermath

  12. Avataaar/Circle Created with python_avatars Teagan Walsh says:

    Drilling is always the worst part of any job.

  13. Avataaar/Circle Created with python_avatars Michael Block says:

    best favor I ever did for myself was to replace my escape's factory lug nuts with 1 piecers. Came in real handy one day I had to pull over and change my spare before work. well yahoo ! I made it work on time only because I worked them mystery size oe lug nuts off weeks before as a preventive measure. the factory setup would have left me SOL.

  14. Avataaar/Circle Created with python_avatars poozepoo says:

    Did this on 2 Dodge Rams went to take off the wheel person that worked on the truck before me tighten the lug nuts too much and stripped them out only option was drilling them two on each wheel on both trucks lucky me

  15. Avataaar/Circle Created with python_avatars Mr K says:

    Hello, What drill bits are you using?

  16. Avataaar/Circle Created with python_avatars tsx3214 says:

    I anti-seize everything… Including the brakes

  17. Avataaar/Circle Created with python_avatars Joshua Kirsch says:

    We do this alot at Ford dealership

  18. Avataaar/Circle Created with python_avatars wayne mg tregear says:

    i never take my car to a dealer for service.

  19. Avataaar/Circle Created with python_avatars Ol'Smokey says:

    Ur gettin pretty good at that Ray

  20. Avataaar/Circle Created with python_avatars David Rutherford says:

    I saw a video once when I had an issue where BMW had a special tool to go over the lug nut ti center the drill bit. Wish I had one that day :/

  21. Avataaar/Circle Created with python_avatars Terry McCracken says:

    We pop out at your party! I'm with the gang.
    And there's gon be a robbery so tuck yo chain.

  22. Avataaar/Circle Created with python_avatars Keith Marks says:

    dealer warranty workmanship in ohio is not the greatest

  23. Avataaar/Circle Created with python_avatars AidXan says:

    Did you make a full vid? Was it one of your new employees fault

  24. Avataaar/Circle Created with python_avatars Michael de leon says:

    theres an actual tool to remove those and takes about 1/3 of time

  25. Avataaar/Circle Created with python_avatars Solomon King says:

    Wish you had a mig welder bro

  26. Avataaar/Circle Created with python_avatars One Puck Chuck says:

    the moral is take care in who, you trust your nutz to.

  27. Avataaar/Circle Created with python_avatars rusco321 says:

    Why not just break them, gonna have to be replaced regardless.

  28. Avataaar/Circle Created with python_avatars t Stricklin says:

    I recognize the Ford lugnuts

  29. Avataaar/Circle Created with python_avatars OLDSKOOLSTYLES says:

    would of been easier to just weld a bar on bolt???

  30. Avataaar/Circle Created with python_avatars StrydyRHellZRydyR says:

    Wait
    .. what on earth… What the hell

    Noooo… Don't tell me that's what they look like just from trying to remove them from a vehicle…
    Especially if it's a Car…. Not a truck.. of anykind

  31. Avataaar/Circle Created with python_avatars First Last says:

    Milwaukee 2667 just snaps those clean, no drill needed 😆

  32. Avataaar/Circle Created with python_avatars Mo Fo says:

    At least it wasn’t an HD

  33. Avataaar/Circle Created with python_avatars Chowderhead AA says:

    🙈🙉🙊🤣🤣🤣🤣🤣

  34. Avataaar/Circle Created with python_avatars Danny Linc says:

    A little white lithium lube on the conical seat when dissimilar metals meet for wheels.
    Tighten evenly, to spec, recheck.
    Without a Lil lube it gets married up and won't turn at the conical seat.
    I had one in a rainstorm that I had to add the jack handle to a very long breaker bar and use all of me .
    A snap-on socket to begin , and all the right moves still required the long pipe for that crack free moment.
    I had learned from early apprenticeship in my area by the water.
    Use a tiny wipe of white lube on assembly with alluminum wheels.

  35. Avataaar/Circle Created with python_avatars Brandon Talley says:

    U always have to protect ur mcnuggets 😂

  36. Avataaar/Circle Created with python_avatars Jose rocha says:

    I bet its from a dodge , those stupid chrome caps i just hate them … If thats the case get rid of them all

  37. Avataaar/Circle Created with python_avatars David Sparks says:

    CROSSTHREADED THE NIGHMARE…HARD STEEL TO BOOT…SAD THOSE BITS COST SO MUCH…(TAKE CARE OF YOUR NUTS…🤣) NOBODY LUBES ANYTHING…DANG…

  38. Avataaar/Circle Created with python_avatars Justin says:

    Why didn't you beat on a smaller socket and twist them off, or break the studs?
    Edit: I bet he has expensive sockets.

  39. Avataaar/Circle Created with python_avatars Michael Cosgrove says:

    I had a situation where I had s locked up lug nut. Used a hole saw bit the same I.D. as the O.D. of the threads. Just don't cut into the rim.

  40. Avataaar/Circle Created with python_avatars matt olsen says:

    I mean, there are cheaper and quicker methods….

  41. Avataaar/Circle Created with python_avatars Ray Bin says:

    This would've drove me "nuts"
    😄

  42. Avataaar/Circle Created with python_avatars InSaNeNaChoz88 says:

    Good grief thats the worst I've ever seen!

  43. Avataaar/Circle Created with python_avatars NightForce 1 says:

    Ray, it's why they're called steelerships!

  44. Avataaar/Circle Created with python_avatars Robert Mcdonald says:

    Cross thread or corrosion?

  45. Avataaar/Circle Created with python_avatars Preacher Dan says:

    FINGER START THEM!!!

  46. Avataaar/Circle Created with python_avatars Chris Lesmerises says:

    Solid Nuts only. Thank goodness the dodge replacements are all solid now.

  47. Avataaar/Circle Created with python_avatars RONALD Tillinghast says:

    I learned a better faster way to get them off if its more then just 1 use a torch melt them off or if its just one i jack the car up outside the shop the side that needs the lug off hook a chain to rim and to back of truck and hit the gas like pulling a tooth the rim flys off breaking the stud off i just replace the stud

  48. Avataaar/Circle Created with python_avatars King Of Sync says:

    So who owned the vehicle before
    The Incredible Hulk?