Customer States: Fix it All! Ford Escape | Broken Windows, Check Engine Light & NO AC https://youtu.be/pGva4qth4Yk
Support the Channel with a Like and Subscribe!
Visit our Second Channel on YouTube, RainmanRay Off Duty https://www.youtube.com/c/RainmanRayOutoftheShop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/ @rainman_rays_repairs
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers! https://rainmanraysrepairs.myspreadshop.com/
Support the channel on Patreon: https://www.patreon.com/RainmanRaysRepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
Featured in Video: 18V OCTANE Brushless 1/2 in. High Torque 6-Mode Impact Wrench https://amzn.to/3pp7mmw
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad https://amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 https://amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector https://amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 https://amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! https://amzn.to/3g5KdAT
Flexible Camera Mount https://amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

Living on the edge, That's right. We got a 2008 I believe a Ford Edge 3.5 liter I think it's an EcoBoost left check paperwork Customer: States Replace serpentine belts. The key work I have the wrong key. Oh no, totally the wrong key.

This one's for an escape I Don't need this here. Let's try again. We'll put that one here. we'll trade it out for.

Whoa! Did you see that I just moved through the Matrix trade it for this key, see if this is the right one and uh, survey says yeah I've heard the horn hole should be all right. Anyway, as I was saying before I rudely interrupted myself. Customer: States Replace serpentine belts. There are two of them.

There's a like a water pump alternator belt and the other one is a power steering belt starting. the engine vehicle has approximately 81 492.1 miles on the odometer. Now when it comes to those belts, I Took a look at Uh at the ordering guide and I found that one of them is a stretch belt and that means it does not have a tensioner like a manual tensioner or an automatic tensioner and it just stretches to go over the pulley. I might be able to replace it without a tool and I may have to order a tool.

So this is either going to be a really easy job with some hard parts or it's going to be a hard job with one easy part. One of the belts, like I said has a has a tensioner and the other belt does not. So let's get into the shop. Uh, we'll throw it up on a rack, pull the wheel off I think I've got to go into the fender.

Well, we'll pull one of the wheels and uh, get the belts removed and see what we're working with. So stay tuned because this is gonna be a very good video opening. Z Hood All right, we're in pulling up parking's the auto. Let's go ahead and power this unit down and see what we've got going on here.

I Would like to pop. see Hood There it is. Found it. clickage Hood Poppages All right Bird Show me what we've got to work with in here.

Definitely looks like a three five. I Don't think that's an EcoBoost in there? Not really certain. Yeah, no, no there's no. EcoBoost I Don't see any uh, charge air pipes or uh, things of that nature, right? Yeah, that's a coolant hose.

coolant hose. No, there's no charge air or turbines here. so this is a non-eco boost. Let's apply some illumination down below and I can see one belt right there and behind it on the crank pulley.

I Can see the second belt. There's our tensioner right up front and it looks like we're getting after most of this from down below. So uh, let's go ahead and get the rack set up. We'll pull the front wheel off, we'll pull the covers and everything off of the fender well, and then we get some access to the front of the engine.

Okey dokes, we using a experience and setting the rack and rolling around on the floors. Moving on up there we go looking good. Let's give it a shake real quick. make sure it didn't fall off.

I won't spare you guys to safety section. Hit that subscribe button and skip this up to a good working height so I can sit in my chair to pull the wheel off and they get the covers off. Beginning wheel removal procedure. Now on the click.
It is. this thing have swollen nuts. It's kind of a tight squeeze on the socket. There may be suffering from, uh, forward swollen nut syndrome and it's where you get rust between the Chrome cap and the steel insert inside of the cap.

What'll happen is that it'll rust up in between those two surfaces. Then the rust will expand and push the Chrome out. Then you can't get a socket on it. That's just silly.

All right. Looks like the inner fender well is coming out. It has been secured with some push. Clips There are two piece clips and we're going to try to get these guys out without breaking them.

There goes the one piece and there's the second piece. The way these guys work is they fit into their hole and then once you push the insert all the way down, it'll expand the outer section of the piece number one and then lock the clip into position. They're kind of good, but sometimes they'll get full of sand or dirt or whatever and they're really hard to come apart on occasion, in which case, you have to break them and then replace them. There we go.

These ones happen to be coming off coming apart. There's no problem, but we're going to pull this inner fender liner out. Let's see. I'm gonna need some sockets.

There's a few. it's like six or seven millimeter. Fasteners or maybe I can just kind of fold this up and out of the way. Maybe Um, yeah, I could probably try that.

I mean we can see what's going on in there, right? Yeah, let's just do that. Let's just bungee cord this thing out of the way. you should be good to go. All right, bungee cord coming in.

Let's just get a hold of that little Loop right there. We'll tuck this thing aside and I'll connect the other side of the bungee to like the hood latch or something. Or perhaps I'll connect it right here to that little radiator support thing. Here we go.

Okay, let's maneuver ourselves up into this little hole here and see what we're looking at. So there's our tensioner. It says Phil Mcco on it. That's forward part.

That is the belt. That uh, is not the stretch belt. It's the primary serpentine belt. But this one over here.

that's the power steering belt and that is a stretch belt. So we have to cut that thing off and then get it on. mostly. Now we're supposed to use a tool over here to Uh to hold it to the pulley and then we'll have to rotate the crank pulley in order to uh, stretch that belt onto the other pulley so that's going to be the hard one.

I'm gonna try to do without the tool. if I have to order the tool, then I have to order the tool and that's the way it is. but we'll see if I can't get away without uh, actually purchasing that special tool to accomplish this job. So first things first: I need to go back up top untension that tensioner because I saw the Uh.
the hole that connects to the ratchet was at the top side. So let's get a hold of that thing first, get this one off and then we can cut this stretch belt off and then attempt to get the new one on. Uh, the two belts have been ordered. they're not here yet, but I expect them to be here at any moment, so hopefully they'll show up while we're working on that front belt.

So let's get this thing back down a little bit and we will untension that primary belt tensioner and uh, get going on this particular project. I'm hoping it comes along quite swimmingly and uh, it's not going to be a headache I've already had a couple headaches today and I don't want to have any more Cheryl that's a tight squeeze too. Holy smokes, look at that down there. I don't even know if I can get a ratchet onto that guy.

What is that 3 8 size I think I've got a low Pro 3 8. let me try that. Let's see. let's see there it is.

Low Pro 3 inch drive ratchet. see how super thin that is? It's good for those hard to reach places. All right. So down down we go.

slip that thing in and I think okay, it's on. That's good. So what I need to do now is just put like a cheater bar. Over top of this, we'll give it a good tug and that should release tension.

Uh, on that belt. There we go. Now when I said cheater bar what I meant was part of the handle for one of the floor jacks. Those are very good breaker bars.

As long as you don't destroy them, come here. There we go. slide that thing right over top of the ratchet giving us plenty of Leverage make this job real nice and easy. light.

Oh I said that and I should have fingers crossed. See, they're gonna work or or it's not. Give that thing a tug, pull pull. Okay, looks like the tensioner has been released.

Hey check this out. So I I snuck it past this AC line and it's kind of just a holding position right here. That's cool. Very fortunate.

So now I can just come on down and pull that guy right off. There we go. Beautiful. Let's release the tension on the tensioner, slide that guy forward again.

There we go. and I can leave this thing right here. Come back and get it later. There's uh, really, no need to remove the tool and the cheater bar since it's not in the way.

Let's go ahead and run this thing back up. Moving on up, relaxing, relax to do here. There we go see. I'm not really in the camp of doing the traditional YouTube thing going.

hey, smash the like button and don't forget to subscribe and comment blah blah blah I Like to do that a little bit more passively, so my version was just putting a sticker on the button I thought it was cute I don't know if it works or not. Maybe it does. Maybe it doesn't. Anyway, all right, looking right up here at that alternator.
I Know it's a tight squeeze. the belt is going over top that Nader pulley. just pull that guy down and maneuver it out from that AC compressor. There we go and belt number one is gonna remove.

Okay, let's just zoom right in for some closer inspection of this belt. Right here we can see it's got some very small cracks and a couple larger cracks. See that right there? That is no bueno. That's not what we want I Mean yeah, it's not at a critical failure Point As of yet, but we are.

We're fast approaching the point where these cracks are going to become very large and potentially cause the belt to break. Was that rocks in there? Oh, there's another big old crack. Look at that one right there. Yep, now see.

these are hard to see and the belt's in its normal position. But if you were to take this thing and give it a flip and then bend it the opposite way, they really start to open up. See that? Okay, well, that's enough for me. That one's junk.

Next time for the removal of the stretch belt. Okay, we reached the point of almost no return. We need to remove this. Stretch Belt Now Stretch Belt Removal is super duper easy.

It's the uh, the installation part that'll get you every time. So all we got to do is get in there. Let's cut this guy off like we're committed. Now it's over with goodbye.

Stretch Belt Ping it has released. Where'd it Go. Hang on. It's in there somewhere.

Let me find it. It went up there. I See you pull that guy out for some closer inspection. There we go.

Okay, let's see what we're looking at here. Yeah, this one is in a very similar condition as the primary belt. A couple little cracks, nothing horrible. It's starting to come apart just a little bit.

There's a few cracks in it. Is that a crack? What is that? Yep, Yeah, there we go. let's give it some. Zoom Action: A little bit closer.

a little closer we can see it. Yeah, nothing crazy, but it is starting to come apart. Good preventative maintenance item on this particular. Ford Okay waiting game I Need some parts? All right it is the next day we return.

I Have some belts so let's get back on this. Stretch Belt Application: Sit right there. look. it even says in the belt stretch bit belt.

So uh, let me get this thing maneuvered in. Now what we're gonna find here is that the crankshaft has two belt lands. There's a larger diameter and there's a smaller diameter. So we need to get this thing on the crank first and slip that behind the large diameter.

Uh-oh my letters and numbers are facing the wrong way. Let me flip this around. I'm weird like that. You guys saw it in an earlier video.

I Like it when the letters Point towards the front of the engine. Now what has to happen here is we need to get this belt wrapped mostly around that pulley. Then we're gonna have to rotate and turn the crankshaft pulley in order to force the belt and stretch it onto the uh, power steering pulley. Now as we can see, there's not much space in there and I'm going to try real hard to just hold on to this belt and hopefully the finger.
The force of my finger words will be enough to generate the friction to walk this thing around as I turn the crank, it might work and it might not I know you guys can't see way up in there and I can feel it and it's starting to slip off. that's that's not working out. So I need to come up with another plan here. I know what I'll do I know what I'll do I've got an idea I've done this on some Chevrolets be right back.

All right. I've got a new plan here and it involves a wire coat hanger. Check this out! What I need is this piece of a piece of wire here. We're gonna snip this off the coat hanger.

so I get one long straight piece of wire like that and I'm gonna make the tool that holds onto this I've done this before and it was effective last time so I'm gonna try it again. We're gonna wrap that coat hanger around to hang on to the belt as a as we rotate that crank to draw the belt through. let me get some more wire here through. this might work.

it might not again. If it doesn't work then uh I'm gonna have to buy the tool. The problem is is that tool is like far away and nobody has one available. So I'm gonna try this without the actual tool you know? So now I'm gonna go with these needle noses and I'm going to give a Twist to this wire, take up some of the space and I'm going to cut off some of the excess.

we don't need all this extra wire kind of getting in the way. Cut that out. Cut that one out right there. So we're effectively hard wiring the belt to the pulley.

see if it works. Maybe it will. Maybe it won't. It kind of has to.

Um I don't have a boatload of options on how to get this thing on, so I must rely on some ingenuity. It's getting kind of ugly looking in there if I add some more space to manipulate things I could make this a little prettier, but I don't A couple twists in it? Come on little. a couple more twists. let's make it tight.

Now we're getting somewhere that's cooking with. Frisco the more I twist it, the more the wire is being taken up in the twist and the tighter it's getting around the pulley and around the belt. You guys see that up there. we're getting pretty close.

So now I want to get the belt back around the crank over here and we'll see if this is going to be enough to walk that Bell around our power steering pulley. See that, let's send it. See what happens? Okay, here goes nothing. See what happens here? I Know you guys can't really see in great detail.

My hands are in the way. but as soon as that wire passes around the top for that belt is separating from the pulley, it should start to pull it in and lock it onto the grooves. should. In theory, this is exactly what the actual tool does.
It's just a little cleaner of a look I suppose. Okay, we're getting somewhere. You take a look up there looks like it's starting to work. Let's keep going.

see what happens? Yeah, getting hard to turn? I Can tell you that. come on. Belt Oh baby. Go.

Yeah yeah, it's gonna work. This is working and she's on. See that the wire's got it captured, it's on. It is over all the grooves.

Success now. I Just need to go in there, snip that wire release. at least. now.

Got it and I can pull the wire section out. Come here Tool. Come here. Tool.

Got it. There we go. That is one belt stretch fit installed without the tool. We'll give it a couple more turns, just make sure it's good.

I Like it. Very nice. All right. let's back it up and get the easy belt on.

We're good to go here. Go a lot. Back under the hood of this board and we will, uh, untension that tensioner and then slip that belt over that alternator. I Think that's the way we've got to do it or oh, I know I'll do it I'll do what I did last time.

we'll just untension it and kind of lock it in. It'll stay put if it's wedged against that. There we go. That's how I took it apart I Remember now know because I can't reach that thing from uh from the top because there's all this stuff in the way I can't even see that alternator pulley up here, let alone reach it.

Okay, let's go back down below real quick and get this thing set up. Rambles Miscellaneous Rambles Over with all right. going back in again. let's go get that thing up and over the Nader A lot of feeling.

It can't really see much, but we can feel it well. I can feel it and then I can tell you what it feels like. so that one's that one's on. On the alternator, the uh AC compressors on idler is on or tensioner and here it goes.

crank pulley so we're good here. that's all set up. See it right there. It's good on the other side.

Okay now I can untension that tensioning device there and you should be all set. Move it over. Push It Forward recover the bar. There we go and I think I can reach down in there and get a hold of.

uh, there it is a ratchet. There we go. So now we've got both belts installed. those are all set.

Beautiful I like it. That was easier than I thought it was going to be, but it. could have gone a lot worse. So now we can put this back.

Oh by the way. I Did not have this thing bungee corded overnight I Didn't want it to like take form and then always be folded in. so I did disconnect it last night. You guys didn't see that because I edited There you go.

Plug that one in push pins for the win. Let's see there's another one down there and one more there. it is up top All right. One, two, three, four.

I don't see any more holes for push pins. Good to go. all righty wheel going back on. Let us get this thing bolted in and torque and then we can restart these.
Auto and uh, make sure those belts don't make noises and whatnot. get on there studs. Okay, got our five lugs right here. Battery sounds low.

There we go. all right hard. Edge Coming down all the way down upload gravity. All right.

let's power up our lumens again. do some double checks. Can't see much looking good. no tools.

Beautiful. Let's us three stockings the engine. We're gonna be looking for some squeaks, belts flying off and destroying stuff. you know, just want to make sure it's right and uh we believe we're good to go here.

I Like it, belt's running good I Can see all the pulleys turn on the AC and put a load on that belt and just make sure AC on continue come on. AC There you go AC on recirculate making cold check the compressor compressors running I Can see the clean the clutch belts are running straight and through. same thing with that power steering in the back. We're all good to go here.

So the bar All right guys. that's going to complete all of our repair operations on this particular Ford at this time. Nice, quick, easy, fast job, no headaches, no special tools required. That's a win as far as I'm concerned.

So that being said, I have nothing more to do here except for close this video out and back this car out. And I will do that first by thinking each and every one of you guys for watching this video. As always I Hope you enjoyed this video. Enjoy this video.

Please feel free to let me know about that by tapping that like button down below. Drop me a comment or two while you're down there. And most importantly, don't forget to have yourselves a great day! See you guys later into Ford Into serpentine belts into stretch built fit application without a special tool to do it with any video, Any transmission.

95 thoughts on “Mechanic hack! coat hanger repair! ford streth belt”
  1. Avataaar/Circle Created with python_avatars David Bachtel says:

    Elephantitus of the nuts

  2. Avataaar/Circle Created with python_avatars T Aune says:

    Instead of coat hanger try a tie wrap around the pulley and stretch belt to hold while turning around to get belt on

  3. Avataaar/Circle Created with python_avatars Anthony Young says:

    I'm spot like you Ray, if there's lettering on the item, it must point front.

  4. Avataaar/Circle Created with python_avatars TheMickSmith says:

    Was I the only one pointing out (Up there on the right!) where the fourth push pin should go?

  5. Avataaar/Circle Created with python_avatars Vinny Castillo says:

    Great hack

  6. Avataaar/Circle Created with python_avatars Dave Drew says:

    This car is in fantastic condition so clean underneath.

  7. Avataaar/Circle Created with python_avatars Steav Congdon says:

    Wire coat hanger…not just for breaking into the car any more.

  8. Avataaar/Circle Created with python_avatars Identity Protected says:

    I appreciate your videos.

  9. Avataaar/Circle Created with python_avatars Daniel J says:

    That car is in really nice condition for its age!

  10. Avataaar/Circle Created with python_avatars Alan Maag says:

    It works

  11. Avataaar/Circle Created with python_avatars Sergio Baez says:

    Just trust your ninjanuity you are the best mechanic out there 🤘🤛

  12. Avataaar/Circle Created with python_avatars The Underground Lair of the Squankum says:

    Michelin tires? Preventive maintenance? I like this customer! You need more like this one.

  13. Avataaar/Circle Created with python_avatars George Cuevas says:

    What is a "Streth" Belt? 😉

  14. Avataaar/Circle Created with python_avatars rhondohslade says:

    Ray, os it just me or is that stretch belt merely a solution in search of a problem? It seems to me as of it is far more complex and difficult yhan ot should ever need to be.

  15. Avataaar/Circle Created with python_avatars Jim Bartram says:

    RAY you should WASH your shop floor it would clean and brighten the shop up

  16. Avataaar/Circle Created with python_avatars Steamy1225 says:

    Can't believe that it doesn't have a tensioner on PS pump. Dumb.

  17. Avataaar/Circle Created with python_avatars wjlortho says:

    don't even have to remove zip tie, just start engine

  18. Avataaar/Circle Created with python_avatars Chris Burrell says:

    Engineering vs mechanic..

  19. Avataaar/Circle Created with python_avatars zacinnc78 says:

    Ray have u had many 3rd gen tacomas in with torque converter shutter or things that mimic that and if so ,what did u do ?

  20. Avataaar/Circle Created with python_avatars Testicules says:

    Try a zip tie.

  21. Avataaar/Circle Created with python_avatars Aubrey Stanley says:

    There have been several vehicle I want to buy that you've worked on. Don't worry, your Silverado is a beautifully truck but I don't want a diesel unless it's a Kw-900.

  22. Avataaar/Circle Created with python_avatars Roy Robinson says:

    Zip ties work !! Multiple (6-8) for serpent belt.

  23. Avataaar/Circle Created with python_avatars Joan Stehlik says:

    He hadn't heard. Of the zip tie trick 😢
    Hope he re torques the lugs🤔

  24. Avataaar/Circle Created with python_avatars B1lly W says:

    zip-tie…. its even the official tool of oems repair procedure . Even comes with some belts from the autoparts . thanks for the entertainment though

  25. Avataaar/Circle Created with python_avatars Joaquin says:

    Use zip ties

  26. Avataaar/Circle Created with python_avatars blondestrainger says:

    Hey Ray , We use zip ties on the pully hole around the belt and its quick and easy

  27. Avataaar/Circle Created with python_avatars Simeon Mendez says:

    Good idea for zip tie .Rain man you're still an awesome teacher.

  28. Avataaar/Circle Created with python_avatars FusionBoost2.0 says:

    Zipties, works everytime

  29. Avataaar/Circle Created with python_avatars GERMAN JESUS says:

    Gates gatorback should be the only belt you replace those with.

  30. Avataaar/Circle Created with python_avatars Rob D says:

    Yup have had many expanded Ford lug nuts, bad design

  31. Avataaar/Circle Created with python_avatars Rob D says:

    I'm not a fan of turbskies on a daily driver but IMO the 3.5 eco is superior to the std 3.5 cyclone simply due to the beautifully placed belt driven water pump

  32. Avataaar/Circle Created with python_avatars karl robson says:

    try old school, start belt on pulley then bump the engine over

  33. Avataaar/Circle Created with python_avatars Kevin Basden says:

    You're the best.

  34. Avataaar/Circle Created with python_avatars MerkDolf says:

    Why no soap mixed with oil on the studs to prevent rust?

  35. Avataaar/Circle Created with python_avatars Gwick358 says:

    I hate working on Ford Edges. Really sucks.

  36. Avataaar/Circle Created with python_avatars TOM2RN says:

    I was thinking of using bell wire (doorbell). Doesn’t have the tensile strength of the coat hanger, but if you used several strands together it might work also. Easy to twist. Zip tie method others mentioned is good. I use bell wire for lots of things. Easy to get at Lowe’s and H. D.

  37. Avataaar/Circle Created with python_avatars Cara D says:

    Your button sticker worked on me, I dig it

  38. Avataaar/Circle Created with python_avatars Iver Mectin says:

    whats a Streth Belt

  39. Avataaar/Circle Created with python_avatars Amanwalksn2abar says:

    Brilliant! 👍👏

  40. Avataaar/Circle Created with python_avatars Antonio Claudio Michael says:

    Great video as always @Rainman Ray's Repairs

  41. Avataaar/Circle Created with python_avatars Shawn 🏴‍☠️ Stafford says:

    I like the Trans-am 🤘 Why didn't you use zip ties?

  42. Avataaar/Circle Created with python_avatars Chris EJ says:

    Subliminal is the word you want 😊

  43. Avataaar/Circle Created with python_avatars Stan Brown says:

    I have stolen your fingerprints from the belt zoom frame and can now use them in the future to hack your stuff… 😂

  44. Avataaar/Circle Created with python_avatars Robert Sensabaugh says:

    And now we're cookin with chrisco.😂😂

  45. Avataaar/Circle Created with python_avatars Mitch Fleming says:

    At least I'm not the only one that uses the jack handle cheater bar…

  46. Avataaar/Circle Created with python_avatars jaguar.racing.us says:

    fords as of late….junk. too cheap to even use a tensioner. when one considers how much is paid for one of these pre-planned obsolescence designed nightmares you would think that at least an idler would be called for during it's design. yet another example of why i will not buy any of this 'modern' crap. hint for ford…single belt setup w/ a single spring tensioner design. how damned hard could it be? even gm can do it.

  47. Avataaar/Circle Created with python_avatars Wills Restorations says:

    I have never purchased a tool to do these jobs even on the 2000 through 2007 Ford Taurus. You just take an extra strong zip tie and it works every time.

  48. Avataaar/Circle Created with python_avatars 8 8 says:

    why a stretch belt? I didn't know it had ribs.

  49. Avataaar/Circle Created with python_avatars Darryl Hoar says:

    How did you ensure that the coat hanger wire didn't damage the belt (or nick it, etc) ? Examining the full belt in place looks like a pain in the rump

  50. Avataaar/Circle Created with python_avatars David Hamm says:

    The same belt is on a mazda 5 engine, zip ties, to the rescue!

  51. Avataaar/Circle Created with python_avatars Rene Neron says:

    A piece of copper wire is much easier to work with. Works great.

  52. Avataaar/Circle Created with python_avatars Kurtis Stutzman says:

    Wow, good job…! Thanks, keep up your awesomeness and go enjoy some nature today…!

  53. Avataaar/Circle Created with python_avatars Viking 2121 says:

    Man thats such a bad design, but leave it to Ford to make it harder for the avg joe to replace something that should be simple

  54. Avataaar/Circle Created with python_avatars Smaky says:

    I use a block of wood between the inner wing and the pully to guide the stretch belt on.

  55. Avataaar/Circle Created with python_avatars Old man huppiedos says:

    It is funny to hear how strong the engines are in the USA.
    Then the Eropean cars have to make do.
    Fortunately, the car is in safe hands as far as the repair is concerned.

  56. Avataaar/Circle Created with python_avatars Michael Bolton says:

    Great work, as always. 😉👍 I also vote for the zip-tie method, but the coat-hanger trick is good, also.

  57. Avataaar/Circle Created with python_avatars Michael Slattery says:

    Belt letters were facing the wrong way.

  58. Avataaar/Circle Created with python_avatars Richard Benavidez says:

    Ray just for the fun of it add one hanger on your invoice at no charge. I’m sure you know all your customers. It would be a great talking point

  59. Avataaar/Circle Created with python_avatars Christopher Arrington says:

    lol swollen nuts syndrome

  60. Avataaar/Circle Created with python_avatars Gary James says:

    hi ray i buzz those bastards on with a tie wrap just zip it in place and "start it" the belt pops on and breaks the tie wrap job done!

  61. Avataaar/Circle Created with python_avatars Mothump says:

    I have always used screwdrivers under the belt and turn the crank to remove and fit a stretch belt

  62. Avataaar/Circle Created with python_avatars Camaro Mods Channel says:

    I always save my old belts, throw them in the trunk if thay are in good condition, If you are out in the middle of nowhere then if you blow a belt and no one around has one in a 100 miles, its will be good to have. I do the same thing with my Golf cart, 5 miles away and blow a belt throw on the old belt and get back home. Just my 2c worth..

  63. Avataaar/Circle Created with python_avatars Don521 says:

    Macgyvered! Love it

  64. Avataaar/Circle Created with python_avatars News Now Riverside Sgt Rock says:

    Love that "😀👍Gravity!"

  65. Avataaar/Circle Created with python_avatars Robert Bowers says:

    I'll remember that trick!

  66. Avataaar/Circle Created with python_avatars David Millard says:

    DOOR!!!😮!

  67. Avataaar/Circle Created with python_avatars Gary Holt says:

    I just watched face off

  68. Avataaar/Circle Created with python_avatars Donald Toussaint says:

    A faster way is to use a brake hose line pinch tool…

  69. Avataaar/Circle Created with python_avatars Don W says:

    I can't help but wonder what the book time is vs what you actually performed it in. Something tells me you smoked the book time Ray🙂
    The coat hanger wire trick is beautiful…I read a few others suggest using zip ties…As befy as some of them are that would be a great go to.
    I just hope the engineers dont try to outsmart yourself and others who have found easier…and cheaper methods of installing that sucker…like pulleys without holes in them. That would be maddening to the nth degree for sure.
    A great teaching video yet again Ray🙂

  70. Avataaar/Circle Created with python_avatars Christopher Wise says:

    did everyone else see the power steering belt was backward???

  71. Avataaar/Circle Created with python_avatars Michael Martin says:

    Come on Ray, ya know you really want the tool…….

  72. Avataaar/Circle Created with python_avatars Matt Alvarez says:

    that was great I've never seen someone use a coat hanger for a car (we've all used them for other stuff) but never a car very cool nice job

  73. Avataaar/Circle Created with python_avatars Perry Williams says:

    Zip strip work too.

  74. Avataaar/Circle Created with python_avatars Erik D says:

    Reee your doing it wrong ray😅

  75. Avataaar/Circle Created with python_avatars Ben Murdoch says:

    I call them a srtess belt ! Pain in the ass !

  76. Avataaar/Circle Created with python_avatars Adrian Leiper says:

    Not cheater bar. Gentle persuader bar.

  77. Avataaar/Circle Created with python_avatars Julius Roberts says:

    I used zip ties to get the belt on the car when iI had to do this.

  78. Avataaar/Circle Created with python_avatars imflori dano says:

    My 2021 Ram 1500 5.7 Hemi etorque haa that same stretch belt from the crank to the water pump

  79. Avataaar/Circle Created with python_avatars CJ-Foygelo says:

    Duct tape, wire hangers and wd40. Necessary in the well supplied mechanic’s tool box

  80. Avataaar/Circle Created with python_avatars Reg Smith says:

    Yea those tensioners can be a pain so I don’t bother to mess with em, just roll the belt off and roll the new one on just as if it was a stretch belt.. works well

  81. Avataaar/Circle Created with python_avatars MLT says:

    Swollen nut syndrome is because lug nuts weren't designed to be used with Impact tools, hand use only.

  82. Avataaar/Circle Created with python_avatars Reg Smith says:

    Swollen nuts eh ? Someone must have kicked the tire ?

  83. Avataaar/Circle Created with python_avatars Thomas Spencer says:

    Zip tie

  84. Avataaar/Circle Created with python_avatars Michel Swerissen says:

    Video approved no gravity, moving on down the road, click.

  85. Avataaar/Circle Created with python_avatars S & B automotive shenanigans says:

    Orchitis is the correct term for swollen nuts

  86. Avataaar/Circle Created with python_avatars Neal Fenster says:

    I thought that the whole point of the serpentine belt was to have only one belt! 🙂

  87. Avataaar/Circle Created with python_avatars Ready Driver One says:

    What an absolutely ridiculous design. Is it that much more effort for engineers to make a tensioner bracket for accessories?

  88. Avataaar/Circle Created with python_avatars Rayleigh Criterion FE says:

    If only they made a ziptie for this belt job.

  89. Avataaar/Circle Created with python_avatars Bill Neu says:

    Great idea thanks for sharing Bill N LI NY

  90. Avataaar/Circle Created with python_avatars Robert Zumbro says:

    Zip ties..did that on my 08 escape water pump stretch belt

  91. Avataaar/Circle Created with python_avatars toledo transmissios says:

    To many fords on the key board lmao

  92. Avataaar/Circle Created with python_avatars Rackernack says:

    Ray, you're the best. I love all the goofy stuff you do to keep us entertained that also keep the comments rolling in… 😁

  93. Avataaar/Circle Created with python_avatars OURv says:

    Autozone will loan you the tool.

    !

  94. Avataaar/Circle Created with python_avatars Michael Herrera says:

    Take the dam extension off the ratchet and be a lot easier

  95. Avataaar/Circle Created with python_avatars OURv says:

    Once everyone gets a Tesla chip implanted in our brains
    our cars will recognize us as soon as we walk up to it &
    will unlock itself for us. The future is going to be So grand!

    !

Leave a Reply to Rob D Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.