Must Watch! Exposed! Oil Change Repair SCAM video! Fake Customer Service & Upselling! https://youtu.be/cD4noPBwB9c

49 thoughts on “Oil change fail! comeback that never left!”
  1. Avataaar/Circle Created with python_avatars Sam Jackson says:

    Add a comment…

  2. Avataaar/Circle Created with python_avatars Martin's MARTIN'S AUTO BODY AND REPAIRS says:

    Being in the collision repair industry I occasionally get oil changes and I use panel bond on the oil filters and drain plugs……never fails. Lol

  3. Avataaar/Circle Created with python_avatars Tom Kennedy says:

    Maybe you put too many quarts of oil in the filter before installing

  4. Avataaar/Circle Created with python_avatars randy beard says:

    You make me nervous when you pour oil from a distance that can cause a oil mess unnecessarily, its your time and nickel, not mine–just saying…

  5. Avataaar/Circle Created with python_avatars Calvin Lane says:

    The old oil filter gasket was upside down

  6. Avataaar/Circle Created with python_avatars James C says:

    Things happen especially with new and used parts. In this case new was defective and Ray fixed the problem.

  7. Avataaar/Circle Created with python_avatars Patrick Stevens says:

    Silicone on a oil filter ??????????

  8. Avataaar/Circle Created with python_avatars mikiedice says:

    Yet they keep making parts in China

  9. Avataaar/Circle Created with python_avatars Richard Sutton says:

    I've seen a few leaking filters due to under-tightening and a couple fitted with double gaskets but I've never seen a properly fitted filter leaking like that. I can only surmise that the central boss on the filter has not been assembled with the thread perpendicular to the end plate. I'll bet if Ray had really overtightened it, as many garages do, then it would not have leaked. However, I would rather do the job correctly and then pick up on manufacturing defects after fitment.

  10. Avataaar/Circle Created with python_avatars C&L Construction says:

    "need more silicone"!

  11. Avataaar/Circle Created with python_avatars gtr100r says:

    Outstanding work as usual. It pays to show you anything can happen even a simple oil change. I am weary of those aftermarket filters, it’s not to say O.E.M’s are faultless. Nevertheless u were on top of it Ray.

  12. Avataaar/Circle Created with python_avatars Scott Dyer Sr says:

    Some other shop had changed the filter, the one you show has red silicone, the one you took off had no silicone, someone playing you.

  13. Avataaar/Circle Created with python_avatars Michael Lawrence says:

    Ray, you did a great job. You should work on a Lamborghini next…

  14. Avataaar/Circle Created with python_avatars Danny Dingman says:

    I just had figured since you put between 45 and 46 quarts of oil in it it was bound to leak out or flow flow flow lol! Did I just troll RayRay?

  15. Avataaar/Circle Created with python_avatars Ron Norris says:

    what do you have against using funnels

  16. Avataaar/Circle Created with python_avatars Jules Anderson says:

    What brand are those filters?
    What price range?
    I would be steering clear of those

  17. Avataaar/Circle Created with python_avatars M E says:

    No matter what the tech does or doesn't do, it's always the people up front to blame. Hahaha. Love your videos

  18. Avataaar/Circle Created with python_avatars Aaron Gurtler says:

    So… do you just write off the oil filter/oil as a loss? Do you send it back to the company for quality assurance check? Do you cut it open and inspect? …or just toss it and move on?

  19. Avataaar/Circle Created with python_avatars Moon Moon says:

    That O2 sensor has just got to be just the right amount of in the way to not hose your job, but make it just a tiny bit more annoying than it needs to be. I always love that. It’s like they do it to spite you.

  20. Avataaar/Circle Created with python_avatars Moon Moon says:

    Clearly you’ve got no idea what you’re doing, Ray. I would’ve left him in there up on the lift. Although if I was left in there up on the lift, I’d be cheering because of all the work I don’t have to do because I can’t do it because I’m stuck on a lift.

  21. Avataaar/Circle Created with python_avatars Monkey Wrangler says:

    CQ reds are trash since advance bought out CQ. The Blues are still decent but not the Wix CQ had them. But the reds are shit man. Work for Advance PT but have my own “shop” too. F those things if you can avoid them.

  22. Avataaar/Circle Created with python_avatars STEPHEN Rivet says:

    Ya i talked yr boss . He's gonna put you back changing tires and tool cleaning !! .DEMOTATION !!! LOL ..

  23. Avataaar/Circle Created with python_avatars Mac_F87 says:

    Have to hand it to the engineers designing that layout of this vehicle. Routing the exhaust right below the oil filter. 😂

  24. Avataaar/Circle Created with python_avatars Jacob Emerson says:

    Same thing happened to my brother a few years ago. He just swapped the engine in his truck and was buttoning up a few things while a friend did the oil and filter, they finished up and let it run for a bit before taking it for a quick test drive, the filter sprang a leak and he ended up locking up the engine a couple miles from home. It was an STP filter he got in an oil change deal AutoZone was running at the time. He ended up spinning a new filter on, and filling it back up with oil, then we dragged it around in gear and got the engine broke loose, it might have been a little worse for wear, but still ran surprisingly good afterwards.

  25. Avataaar/Circle Created with python_avatars Jose Diaz says:

    I use high quality 20k mile rating Walmart oil filters 🤣. Jiffy lube over torque my oil pan bolt a while back and I just do myself now. Bought one of those nifty adapters that has a hose attachment. So I'll never have to take out bolt again. Oil changes are too expensive anymore and the places that advertise cheap ones will try like the devil to upsell you on something

  26. Avataaar/Circle Created with python_avatars Chris Hufnagel says:

    On a semi-related experience, I just had some water plumbing done and everything was fine for 24 hours after service. Then leaks starting showing up. No big deal, called plumbers and they gladly came out to fix it. Luckily nothing was damaged. Stuff happens and not necessarily the techs fault. You can be sure I put water leak alarms all over the place after that though. At least a car can have a low oil engine light.

  27. Avataaar/Circle Created with python_avatars meRyanP says:

    WOW RAY YoU ShOuLd HaVe ChEcKeD YoUr WoRk!!!! RoOkIE mIsTaKe!!!! haha

  28. Avataaar/Circle Created with python_avatars Kevin Coop says:

    The poor mechanic working on my sons 2004 Silverado diesel! He has replaced the steering box and a few other parts twice now. What’s being turned out to parts stores seems to be junk.

  29. Avataaar/Circle Created with python_avatars joe smith says:

    did you call the company about the defective part? maybe there is an issue.

  30. Avataaar/Circle Created with python_avatars Steve McRichards says:

    Dude, get a funnel!

  31. Avataaar/Circle Created with python_avatars Oldschool Dude says:

    I've seen a whole batch of bad filters. Multiple filters tried and they all blew oil past the gasket. Faulty antidrain backs at the inlet or faulty bypasses is all I can figure.

  32. Avataaar/Circle Created with python_avatars zay turner says:

    Lol you are funny with the fast and furious quotes haha

  33. Avataaar/Circle Created with python_avatars njrenkable says:

    I had that once, on an 84 corolla. I changed the oil myself then on the way to work the oil light came on. I immediately turned it off and coasted to a stop. Got oil in it and the motor was hopajuped. She knocked until she didn't, it too looked as if there was nothing wrong with the seal. Now I only buy k&n filters no more fr……..

  34. Avataaar/Circle Created with python_avatars andy robinson says:

    This is for all you idiots who give Ray a hard time saying he should of done this or done that. SHUT UP! …..Ray is the best mechanic I have seen in ages; he is thoughtful and goes far beyond what most mechanics do. And just so you all know I am a mechanic myself so I know! I would be happy to take my car to Ray .

  35. Avataaar/Circle Created with python_avatars R Mc says:

    my car has engine under cover so can't see leaks like this

  36. Avataaar/Circle Created with python_avatars Thirty Three says:

    If an oil filter is defective some how, does the oil filter manufacture cover damages the the filter caused. Probably not. Thats what lawyers are for.

  37. Avataaar/Circle Created with python_avatars Thirty Three says:

    Lets say this car would have run out of oil and ruined the engine. Maybe it took a week to do it. Do you replace the engine or does the shop say once that car leaves the shop its not their problem for any problems that come up like leaking filters or oil plugs or no oil in the engine. How many cars now days will warn of low oil or no oil pressure and shut down or not even start? Is that most cars or all cars?

  38. Avataaar/Circle Created with python_avatars Thirty Three says:

    What was wrong with the filter? You can't do a video like this and not look at the filter for defects.

  39. Avataaar/Circle Created with python_avatars John Manion says:

    The female threads are off center defective part, always stick with your gut.

  40. Avataaar/Circle Created with python_avatars william colabaugh says:

    Like the link

  41. Avataaar/Circle Created with python_avatars william colabaugh says:

    Really on oil change you don’t have funnel to use.

  42. Avataaar/Circle Created with python_avatars Just Tubs says:

    No evidence of part being bad. Possible dirt left on the flange. Flushed away when removing filter. I always wipe flange to be sure it is clean before installing a new filter as dirt can collect around the seal between changes.

  43. Avataaar/Circle Created with python_avatars Aren With The E46 says:

    Ever heard of a funnel?

  44. Avataaar/Circle Created with python_avatars John M says:

    Wait to go Ray, you should have known better man….. what are you an Aaammmmature? Lol, JK buddy . Strange how that happens, I just had a leaky gasket on my truck the other day. But I didn’t even get it out of the garage. What a mess. All the best Ray. P.s. if the customer ever doubts your work, tell them about your channel. All doubts will subside.

  45. Avataaar/Circle Created with python_avatars Z Ack says:

    Oil filter housing is cracked.. when you screwed the filter on this go round you didnt put the torque on it like you did last time and it didnt open that crack back up this filter.. just saying has happened to me.. couldnt even see any cracks but when i put the twist on it even by hand, it would leak.. hell of a headache and a bunch of what the fucks but noticed it when i stuck my finger in the middle to see if something was stuck up in it and it pinched my glove.. was like hey thats not supposed to grab my glove.. and yep.. 40$ oil filter housing and boom theres your puddin..

  46. Avataaar/Circle Created with python_avatars Jason Terry says:

    Nooooooo Monicaaàaa…

  47. Avataaar/Circle Created with python_avatars jack leyman says:

    Interesting comments but in the years I've been driving and owning many different cars, 42 years so far, I've never had any mechanic put all those different lubes on the filter. I'm not saying that was the issue even though Ray showed there was no leak initially, but perhaps the substance in those lubes caused a chemical reaction to the rubber gasket seal that may have shrunk or compromised it somehow.

  48. Avataaar/Circle Created with python_avatars Dean T says:

    I had a one of my company's Kenworth come back in to my shop for an oil leak. It too was coming from the seal 5,000 miles after installing it.

  49. Avataaar/Circle Created with python_avatars MechanicalCarnage says:

    As much as I enjoyed the carquest oil filters, I phased them out for Hastings. Every so often you get a large oil filter with a spot welded base plate and it leaks.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.