Check out my Merchandise Store Below the video for Men's and Women's Apparel, MUGS and Stickers! https://rainmanraysrepairs.myspreadshop.com/
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage right now
Must have for any toolbox!
Mercedes BMW VW Wheel Stud Master Kit: https://amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! https://amzn.to/3IfDeOa
Brake Caliper Compressor: https://amzn.to/3gQBuiB
GearWrench Hose Clamp Pliers: https://amzn.to/33YCVJ3
My Camera Gear:
Gopro Hero 8 https://amzn.to/3mPnpFA
Gopro Hero 9 https://amzn.to/3EKDcM1
Hero 8 Dual Charger https://amzn.to/3EId84c
Flexible Camera Mount https://amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”

Howdy folks, good day to you, welcome back, looks like we got a toyota highlander limited uh customer stage check engine lights on, it runs very rough installs and it does several other things and they think it's all related. Let's go ahead and power. This thing on and see what's going on with it starting engine now whoa yeah, this isn't cool. I'm just gon na go straight to the shop, we're not driving this car anywhere.

It sounds like it is running. On half of an engine very, very rough, okay power, brake assist is almost non-existent here. Maybe there's a huge vacuum leak. Oh, i forgot 230 01 miles on the odometer.

How about that shut you down now, there's some parts on the seat over here. I wonder what we have a couple things: import direct looks like some sensors and uh. What is this a solenoid all right? Okay, this looks like a variable valve timing. Solenoid, it's a used part.

This was in the box, so i'm assuming they changed this already. Next, i'm going to assume these are camshaft position. Sensors see what we have here sure are: okay. Is this a new one? Nope it's got oil on it all right! Well, we've already loaded the parts cannon and that didn't seem to fix the problem.

Let us pop an easy hood see: what's going on down there, okay, i see a new solenoid right there and i see a new sensor there. So something tells me this is our affected area, but what i'm wondering about is that uh lack of a brake assist - and i can see here that the vacuum line is not broken or detached. I wonder if it's got a cam, that's like locked in the full advanced position or something like that. Let's restart it and see what's going on and when i pulled this in, i thought i heard a vacuum leak from somewhere, so i'm gon na go and restart this.

Since we know it has oil in it and uh we're gon na see. If i can't hear it from over here, it may just be a huge vacuum leak. We'll see, i don't know man, i think they blew it up. Something is very unhappy over here yeah.

I definitely hear something odd going on here. This is not right. I can't tell if it's metallic or if it's some kind of exhaust leak. This is a very odd sound to me.

So what are we doing all right? Let us check the ecm for some trouble codes. That's at least maybe tell us what cylinder is affected here and it can help to start to narrow things down scan tool power. Oh that's, a problem right. There, whoa tracking device gravity yeah.

Maybe it's a one of those bluetooth things that sends your codes to your car or to your phone. Oh it's hot! In here, winter's down. You know i feel like. I know this toyota for some reason like i have been here before toyota highlander id.

Thank you. It's attempting to identify the ecu 2005 highlander 3.3 liter identification, successful engine, it's going on 400 different codes watch. This come on. Maybe i don't know this highlander.

I tend to remember things like that. Talking to myself multiple misfires cam sensor, a circuit ignition, coil d, primary circuit: this doesn't help it doesn't help at all, okay, okay, so we had that cam sensor, a circuit code or sensor 2 circuit code stored in the ecm, had something to do with bank 2.. So i'm going to just pop these plugs out and i think i'll just toss a compression gauge on this. I'm a little curious to see if it's lost compression on this one bank, because it feels and sounds like it's half of an engine.
Oh, you know what actually i can. I can prove that some watch, this okay engine running we're all good right. My disconnect coils, you see it does not care come here. I don't hear that one firing either, and i think i can also demonstrate that these coils will fire and probably hear the spark listen here.

These are trying to fire shutting down. Let's pull these spark plugs out whoa. Those are super fuel soaked. You see the gloss on them.

That's not good! That's covered in fuel. It tells me the injectors are firing another one, there's actually liquid fuel here hot yeah same on this one, there's fuel not as much, but there is fuel on it regardless alrighty. It is compression. Checking time, let's see what we got so we're gon na need one adapter and a gauge we're looking for a minimum of 90 psi needed for combustion.

Let's see so we're just going to thread this into the spark plug holes, go inside and crank the engine for three seconds and then we'll come back out and check the gauge. But not you guys here. You guys are gon na stay here and uh watch. This gauge, like i said, we're looking for a minimum of 90 psi just for combustion to even be able to occur, but ideally we want to see like 150 to 180.

Now i need to disable the fuel injectors and the remaining ignition coils out back, because i don't want this thing to start, while i'm trying to check it so we're going to pull the ecm fuses out or the fuel injector relay. What do we got here? Efi number one and ecub: we can pull those out 20 amp and 7.5 amp. I think we're looking for here's our 20 and seven and a half that should keep the engine from starting. Okay.

You guys hang out right here. Watch that gauge. For me, oh, not good! Where are we at 60 pounds? Okay, try! The next one! I wonder what happened here. You got all right.

10 pounds is that the cylinder that was most fired, all three of the whole banks, the whole bank is shot. The whole bank is out yep, it's got a code in there for cam position b bank two or something like that. It it lost the belt. Oh, i could have lost a belt.

I bet it lost the belt or did one of these? I know i don't know a couple days ago: um either lost the belt, or i mean i don't know yeah i don't know well. The timing went off yep a little better. 25 yeah. Well, i had 60 on this one, so i guess 60, 10 and 20..

Something like that junk, i think it died yeah. I usually just pull the relay, which i think was uh this one okay, backing up um, i think next, and mostly just because it's very easy to get to. I think i want to pop this cover off and just just take a look at the valve train under here and make sure we didn't lose like a cam phaser or something like that. We're going to get through this rather quickly, because there's not much that's uh.
Gon na happen under here other than an inspection, oh, my pin, flew out of my wobbly, got ta go fix that yeah. I know i know if you didn't use your wobble extensions on an impact. They wouldn't do that. Well, ten years later, it's still good, but thanks for the advice, man, you know guys, i'm sorry, i'm a little.

I was a little defensive and kind of salty. With that comment see over the weekend and over the videos that i posted this weekend, i caught a like truckload of angered rage and hate from uh who i would assume to be a new audience because most of you guys don't talk like that, but man, people Uh people are cruel, like i lost some faith in humanity over this weekend and not that i had much to begin with, but you know you so many people really showed me just just how ugly an individual can be. I mean you guys, think it's okay to come on the internet and say things personal things to people, knowing that you would never have the stones to say stuff like that to someone to their face and you parade around on on the internet like this is acceptable. Behavior, it was it's just disgusting and bottom line is shame on you, you're one of those people that didn't work now, don't get me wrong, i'm all for like criticism and especially constructive criticism.

That's how we grow, but some of you folks are just nasty in like the worst ways like this bolt right here. I think that's all! No, no! No! No! I'm way off. Okay! Last one hey! What do we got here? You know uh this operation right here is gon na, be a perfect example of that yeah. I can probably figure out what to do without taking this part and there's gon na be some jack wagon that shows up, and it rips me a new one, because i took it apart when i should have pulled the uh timing cover off first and looked at The chain i should have done that first, but instead i pulled the valve cover off and that's not the procedure and blah blah blah, and you really have no idea what you're talking about because you're, not in the situation you're watching on tv and on your phone.

This is a highly edited production made out of real-life footage and commentary, and most of you, you just y'all, can't understand that and it's it's ugly, like i said kind of like what i just found right here. This is everything you know normally. I would edit out stuff like this, my unrelated commentary or uh, something that might be considered uh slightly controversial, tad divisive normally. I would just take that away, but i think i'm gon na leave that in this time you guys earned it.
I guess what i'm saying is: bottom line: it's a free country and if you don't like what happens around here, you know go watch, scotty, kilmore or something i mean. I don't care what you do just don't come around here. Acting like that. You know we're.

Not here for that we're here for this broken camshaft, you guys see it yet look at that. It broke a cam. I knew it. It was running on half of an engine.

So what was going on here is the injectors were still injecting fuel. That's why these spark plug holes here and pistons are loaded up with gasoline. That's why they're soaked? It was still spraying fuel, but it couldn't ignite the fuel because there was no compression and there was no compression because the valves were not running. So i don't.

I have no idea how this camshaft broke like this is new to me, but um. This is not good. This is not good at all. I see a lot of a lot of torn up metal right here under this cap.

I'm going to pull this off next again, i'm going farther than i probably have to, but that's what i do and you know don't get me wrong about my little monologue. Don't i understand you know haters gon na hate, if you're doing something good, there's always gon na be somebody that wants to come along and crap on it and that's fine. You know, that's that's just the way of things and that doesn't bother me at all. But what does bother me is just how brutal some people can be with their words, take a look at that see all the metal on this face right here.

That is all camshaft material. This thing tried to weld itself together. What gets me, though, is what broke the cam. You know, i'm wondering see, there's a valve right come here, there's a valve right underneath of this lobe here, and it is pushing that cam lobe upwards.

I'm wondering if this thing jumped time and piston came up and smacked that valve sent it up into the camshaft and snap the camshaft off. Let's pull off one more cap, that's kind of tight! No here we'll just do a non-wobbly socket, oh yeah, even that one's a little torn up well gone. This far might as well keep going that one's looking good. Okay, i think that's all the carnage we're gon na find inside of here has anyone ever seen.

This happen before i've. Never i've never seen one of these engines break a can. I'm gon na recommend we at least hold a cylinder head, replace the head. We need cam shafts.

We need a new timing set. I know i'm going to find something else. That's destroyed on this somewhere somehow some way. That being said, i do believe my recommendation is going to exceed the value of the vehicle, so i i speculate, we're not going to be fixing this thing we might be i'd, be surprised to learn.

Sometimes that happens, but this thing's pretty far gone at this point, i think other option is going to be to just replace the engine with a salvage unit also doable. We don't need this off anymore pick. Okay, things have taken a turn, so to speak in a direction. I did not foresee the uh the owner of this truck again phone.
The owner of this truck would like to know why this happened. What we're gon na do is pull these covers off and inspect the uh. The timing belt, which are my fellow says, was replaced not long ago, but if that sticker is accurate, that's uh nine years ago anyway, we want to see the condition of the belt. So i'm gon na go ahead and keep pulling this thing down until we find uh what actually caused this camshaft to break off.

It could be something it could just be that the camshaft broke, and that's that's just is what it is odd noises all right. That's what i'm gon na find out. Okay, the motor mount has to go. I'm gon na go ahead and pull this power steering bracket off power, steering fluid reservoir bracket off then we'll pull the mount out, and that should give me enough access to pull the covers off the cams that didn't help.

Much did it. Oh, maybe enough to get this bolt out, yeah, that's what i really needed there. I can go right there for now. This mount system is a little goofy.

It's a series of little brackets brackets on top of brackets, held together with brackets and bolts. That's a big one there that was down in those hard to reach places okay bracket under the brackets come out come on, got it that little pin is what was hanging this up. You know i recognize this engine now i mentioned it before, but i recall, having put valve, covers and spark plugs in this for valve cover gaskets and spark plugs. This is very familiar to me.

Okay, there's. I know there's more bolt than that. Where's, the other ones and there's not one yeah, there's one all right, there's one more nasty bolt like way down under. I think i got it there.

We go. That's the last one. Now our cover should come out of there. Let's see, oh something happened in here.

Okay, well, the belt's in really poor shape it's running off of the pulley, because this pulley is actually running at an angle. It's pointed uh kind of downward, and so the tension on the belt is trying to make it walk off and come off of the uh of that actual pulley there. Oh there it goes yeah it fell out. I ruined it.

Okay, i kind of didn't want to do that, but this is what it is question is. Can i put it back nope yeah, maybe with two hands? Oh hey, look. I found something. There's a bolt sticking out down there see that right there.

That looks to just be for like a power steering pump or something, but still the bolt sticking out nonetheless, so uh cosmetically. This belt looks like it's in really good shape. I can get behind these uh components only being six months old. That either looks good.

So i'd like to get way down, so you guys can see where the tensioner is. It's super far i'm gon na try to do this. It might work it might not. Can you see it that metal stuff right there to the right of my finger? That's a mounted tensioner and i did feel tension on it just before that pulley popped out of there.
So i i have to conclude that there's nothing under the timing cover that uh. They caused this failure again, i'm not really sure what caused it to happen, but something did, but i don't believe it was the belt or or a belt failure. Now it could have been something that happened during the installation. It's really tough to say.

Maybe it developed a crack right here, while that was uh being torqued at some point, but i don't even know why this would have been removed come here. You come out uh, it's a negative. It's not gon na come out now this uh this pulley was removed. I see witness marks on the bolt yeah.

It looks like perhaps somebody put a fresh seal in it or something like that yeah. It could have been over torqued. Very, very tough to say you know what, since uh, since the cylinder head is camshaft as junk as it is, let's try to pull it out, and maybe i can gain some visual access to the top of the valve over there. We can at least check to see if the valve fell out of it or if the retainer broke couldn't hurt.

It's already jumped come out. Please, okay, it's pretty clean break all right. What we're interested in is the top of the valve here. There's the cup and it looks like the valve - is still there, so it didn't fall out it.

It may have had an impact with the piston. It's super hard to tell all right that's about. As far as we can go, we determined that it was not the fault of the installer who put this belt in so um. I've really got no conclusive evidence on what actually caused it, but either way there's none of this is going to happen today.

So i'm going to go ahead and close this video out right about now, as always like. Thank you guys for watching. I hope you enjoyed this video if you did enjoy this video, please let me know about that by tapping that, like button down below and drop me a comment or two while you're down there, if you didn't like this video or if you just don't like me, I don't care, i don't like you either so again, as always. Thank you guys for watching and most importantly, have yourself a great day see you guys later.


50 thoughts on “Catastrophic damage! just replaced timing belt! toyota 3.3 v6”
  1. Avataaar/Circle Created with python_avatars James Setter says:

    There's a saying my dad would say, it takes all kinds of people to make the world go around, the good, the bad, and the ugly. I also like the movie.

  2. Avataaar/Circle Created with python_avatars Brenda Daniels says:

    My family and I LOVE!!!!! your videos!!! Screw the trolls!!!!! They are so pissed at their own lives they have to destroy everyone else's!!!! Thanks for all the great videos!!!

  3. Avataaar/Circle Created with python_avatars Uncle Greybeard says:

    An owner that thinks the way we do – "what caused it to fail?"
    Should have him stuffed and mounted, not many would pay for the exploration.

  4. Avataaar/Circle Created with python_avatars Robert Swartzwelder says:

    Another great video Ray!! Thanks for bringing us along!

  5. Avataaar/Circle Created with python_avatars Kurtis Barnes says:

    I will say, I did a timing belt in my garage, on the 3.0 vvti version of this motor, I'm very thankful for videos like this. Thank you for your hard work, and information that you put into these videos! Luckily the 3.0 is non interference. Of which I was thankful!

  6. Avataaar/Circle Created with python_avatars TonicofSonic says:

    DO NOT FEED THE TROLLS

    Ignore them and they go away

  7. Avataaar/Circle Created with python_avatars Alan Reynolds says:

    Great work Ray! Pulling the timing cover first would not have let you diagnose the problem as quickly, and time in the shop is money to the customer.

    Remember, there are people out there that have miserable lives and they serve no other purpose than to make everyone else just as miserable as they are.

    I watch because you are not only fun to hang out with (on video anyway) but you also teach and display an attitude that can only describe as 'Competently Enthusiastic'. You make no judgements – and lord knows I've watched you repair cars that I can only shake my head and think, 'Maybe he really needs to tighten the nut behind the wheel for abusing this vehicle to lead to this condition.'.

    Keep up the good work Ray, and for all the gutless, cowardly 'keyboard' warriors out there, go find some kittens to abuse….

  8. Avataaar/Circle Created with python_avatars HouseCallAutoRepair says:

    Ouch.

  9. Avataaar/Circle Created with python_avatars Michael Lawrence says:

    So this is how the consumer wants it… OK Ray. Or Let’s give em some really negative comments. Ray, you’re a brilliant mechanic and I’m totally impressed with your skills and problem solving skills. Unfortunately you’re racist against Italians. Want proof? We have never seen you working on Lamborghini, Ferrari or even a Fiat. You evil baddie. I hope you look at this and place it on your List of things you should work on.
    Ray, you rock for a racist bastard. 🤣

  10. Avataaar/Circle Created with python_avatars jamienoel says:

    I still like your work no matter what anyone says. Sorry to see they affected your mood like that, but they really aren't worth it.

  11. Avataaar/Circle Created with python_avatars C Nalley says:

    Hey Ray. Kudos bro. Never stop making your videos. Informative always. Interesting always. Build a thicker skin bro. Callous up a little. I've criticized before but I'll tell you what. You are among the elite in automotive repair content. I'll never stop watching but bro. Your gonna get negative comments just callous up and move on. We'll be here tomorrow bro. Have a great day.

  12. Avataaar/Circle Created with python_avatars Mumu Lester says:

    Another Toyota fails catastrophically. As far as the trolls, they wake up with the sole intent of making others as miserable as themselves.

  13. Avataaar/Circle Created with python_avatars Bobby wills says:

    I only watch a few youtubers. South main auto, watch Wes work, yours, let's dig 18, dirt perfect, Spencer lawn care, fab-rats and Matt's off road recovery.

  14. Avataaar/Circle Created with python_avatars Michael Paris says:

    Yea I subscribe to what I like and appreciate the amount of pro info I get on your and others content. I have saved so much time and money learning tips to fix my own mechanical issues. I do tasks now I would never have tried to repair thanks to the efforts of jenerous folks sharing knowledge. I only wish such guidance was available when I was coming up 40 years ago. Thanks for all your incouragment and your good nature.

  15. Avataaar/Circle Created with python_avatars theeddorian says:

    People have the option of learning alternatives and flexibility, or not. The ones that refuse to are simply stuck in their ways. You offer alternatives that those of us who prefer flexibility and alternatives appreciate. Keep going as you are, it's what we viewers are here for.

  16. Avataaar/Circle Created with python_avatars John Doner says:

    There a lot of unhappy people in our world, a situation exacerbated by the "beautiful life" they see on TV, but is of course inaccessible to them. They compensate for this artificially induce inferiority by hating the real achievers in this world. Just part of our age.

  17. Avataaar/Circle Created with python_avatars MegaSensimila says:

    Ray we love you

  18. Avataaar/Circle Created with python_avatars Ronald Davis says:

    Ray the trolls have no live. They get off being mean unless humans. I know its hard you to read them but just remember you have tons of people that love your channel.

  19. Avataaar/Circle Created with python_avatars Wildman113 says:

    Typical toyota owner. A cheap ass trying to keep their worthless junk on the road by installing used parts. It was a piece of shit when it was new, and it's a piece of shit now. Junk it and buy a real vehicle.

  20. Avataaar/Circle Created with python_avatars thomas roberts says:

    I am sorry if my comment that you should Brazillian wax your armhair was out of line. I meant no harm.

  21. Avataaar/Circle Created with python_avatars Ron P. says:

    liked

  22. Avataaar/Circle Created with python_avatars marty says:

    Only 238000 miles?? Toyota didn't make it to 400000. Nutz

  23. Avataaar/Circle Created with python_avatars Chrissie Tkachuk says:

    Ray, my husband and I love your videos on both channels! You do you. There’s always gonna be nay sayers and people judging everything you do. Some people are just so negative they have to break others down, especially if you are having success. Your true fans appreciate you and enjoy your videos. Haters gonna hate

  24. Avataaar/Circle Created with python_avatars William Burdine says:

    Just TELL all those Whiners and Couch Coaches to piss off… I am cool with that… there are a lot of trolls. Just block them…. although your commentary is very entertaining 😉

  25. Avataaar/Circle Created with python_avatars Andy Golden says:

    Scotty sent me to you. Plus I grew up in Clearwater. I remember when US19 was a road, instead of mini interstate.

  26. Avataaar/Circle Created with python_avatars Victor Song says:

    Ignore the haters. They are mentally ill, needing help from psychiatric professionals.
    Love your vids.
    That broken cam is kind of amazing. Is this an interference engine? If it's not, it just might be a defective cam, metal fatigue brought it out. Or broke a rod and then the piston interfered with the valve? Curious to know just for solving the puzzle, but I know you've got no time for that.

  27. Avataaar/Circle Created with python_avatars Austin Farley says:

    Every time someone says Ray doesn't know what he's doing, God kills a Toyota.

  28. Avataaar/Circle Created with python_avatars JAR says:

    Ignore those low lifes Ray cuz they jealous of your skills,and they only know how to change a spark plug cuz they see your channel 😳🤣✌️🍺🇺🇸

  29. Avataaar/Circle Created with python_avatars John H says:

    Not a professional mechanic, but I wonder why one wouldn't replace the broken camshaft and bad bearings, reset the timing and send it. Considering the alternative is the car is junk right now, wouldn't it be worth the expense to take a chance? The owner already owes a bill for the diagnosis.
    Maybe the thing would run another year.

  30. Avataaar/Circle Created with python_avatars marty says:

    Ray- Looks like minor equipment dissassenbly during rotation. What did it take to snap that??

  31. Avataaar/Circle Created with python_avatars scottholt69ify says:

    Some people always think they know better than you. If you don't like the way he diagnoses problems watch someone else and more important shut the hell up.

  32. Avataaar/Circle Created with python_avatars chris parker says:

    Thanks man.

  33. Avataaar/Circle Created with python_avatars Garth Junor says:

    Such a cruel world when people are forced to watch things that annoy them so much they have to publicly vent. It's a pity their instument of torture has no channel change or off switch.

  34. Avataaar/Circle Created with python_avatars Gayle Woods says:

    People gonna hate. Especially on the faceless internet. Most are just jealous that you are better than them. Keep your head high and making great videos for people that appreciate you.

  35. Avataaar/Circle Created with python_avatars chevyhs says:

    Love your content. Telling haters to watch Scotty Kilmer is the best insult ever!!!!

  36. Avataaar/Circle Created with python_avatars boraepr says:

    ray don't worry about the haters just do your thing the book says this books says this and that blah blah blah once you've been around the block a few times you start applying your knowledge to your diagnostics if people don't get it they don't who cares your inviting us into what you do for a living a lot of us appreciate it for for entertainment of education value keep up the good work brother were the end of an era once were gone the world is screwed

  37. Avataaar/Circle Created with python_avatars Ronald Brosius says:

    Ps i like yo, and your videos 😁🤣👍

  38. Avataaar/Circle Created with python_avatars Robert Wozniak says:

    hey ray..what was the outcome of this vehicle did they junk it or?

  39. Avataaar/Circle Created with python_avatars Victor Santamaria says:

    When you said we nasty… A smile came on my face… Then you finished the comment.. i was like… Smile gone

  40. Avataaar/Circle Created with python_avatars SKYRAIDER8 says:

    Ray. Your videos are professional, educational and humorous. Don't change. Don't worry about the jackwagons, they are jealous of your ability to fix cars.

  41. Avataaar/Circle Created with python_avatars mugz91 says:

    Let the haters piss up a rope; because, you know, gravity…

  42. Avataaar/Circle Created with python_avatars Kurt B says:

    Always awesome videos and great commentary! Keep it up!

  43. Avataaar/Circle Created with python_avatars michael redwine says:

    👍 Awesome video. No sense in speculating what caused it to break but I'm like you, if the owner really wants to know what happened he would have to pay for a full tear down of the engine (as an electrician I can't call it a motor unless it's powered by electricity) and even after the tear down there's no guarantee that you can determine what happened. Could even be a manufacturing defect that finally gave out.
    PS. Love your videos. I'm a serious fan.👍

  44. Avataaar/Circle Created with python_avatars Leslie May says:

    Today boss asked why I pulled almost everything from front of an engine. Took my airline and blew in the flues. So much dust came out he said pull air to air and radiator out and pressure wash them. He started out complaining about time spent on truck ended up telling me spend more
    Ignore stupid people who couldn't do our job to save their lives

  45. Avataaar/Circle Created with python_avatars Ryan Rohauer says:

    Only about 5 mins in and I can tell you it has no compression as soon as I seen the fuel soaked plugs no compression.. I immediately knew ..I was always taught engines need only 3 things fuel spark and air. I have always disagreed and this is a perfect example why it has all 3 but it don't fire

  46. Avataaar/Circle Created with python_avatars Thomas Lehman says:

    People suck. Have a beer.

  47. Avataaar/Circle Created with python_avatars David Hayden says:

    we love you man. your almost the only honest MECHANIC IVE seen. keep up the good work.

  48. Avataaar/Circle Created with python_avatars Michael Valich says:

    Worked as a mechanic for 25 years, and you are one of the best, don’t listen to idiots

  49. Avataaar/Circle Created with python_avatars Michael Pendarvis says:

    😁🤣 'I don't like you either"! Don't let 'em get you down Ray, I like your style and your honesty, keep doing it!

  50. Avataaar/Circle Created with python_avatars Troy Allen says:

    Trolls mentally low IQs talking trash in comments. Unfortunately with a YouTube channel this happens, just jealous they can't work on a vehicle.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.