Check out my Merchandise (because I don't say MERCH) Store Below the video for Men's and Women's Apparel, MUGS and Stickers! https://rainmanraysrepairs.myspreadshop.com/
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage right now
Must have for any toolbox!
Mercedes BMW VW Wheel Stud Master Kit: https://amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! https://amzn.to/3IfDeOa
Brake Caliper Compressor: https://amzn.to/3gQBuiB
GearWrench Hose Clamp Pliers: Currently Unavailable
My Camera Gear:
Gopro Hero 8 https://amzn.to/3mPnpFA
Gopro Hero 9 https://amzn.to/3EKDcM1
Hero 8 Dual Charger https://amzn.to/3EId84c
Flexible Camera Mount https://amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Support the channel on Patreon check out the bio: https://www.patreon.com/RainmanRaysRepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage right now
Must have for any toolbox!
Mercedes BMW VW Wheel Stud Master Kit: https://amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! https://amzn.to/3IfDeOa
Brake Caliper Compressor: https://amzn.to/3gQBuiB
GearWrench Hose Clamp Pliers: Currently Unavailable
My Camera Gear:
Gopro Hero 8 https://amzn.to/3mPnpFA
Gopro Hero 9 https://amzn.to/3EKDcM1
Hero 8 Dual Charger https://amzn.to/3EId84c
Flexible Camera Mount https://amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
okay very strange phenomenon I keep getting cars with even numbers of mileage it's like the second or third one this week it's weird this unit right here is a 2012 Chevrolet Colorado customer was in kind of a parking lot fender bender and the bumper is all smashed in and dented on the right front and our customer would like a new bumper yeah out of the bumper broke the plastic thing we're going to replace this plastic thing this plastic thing and this metal thing let's get all the clips pulled out all the ones we can see anyway I think I have to reuse some of these okay fog light bulbs are coming out those are going to stay behind it's just held on with uh two bolts in the frame rail here and then two more on the other side I don't see any others everything else I'll just have to take apart and swap over once I get the whole unit removed all right driver's fog found it's easier to just disconnect the connector instead of trying to remove the bulb these bulbs don't seem to want to come out unless I remove this little shroud thing right here I'll do that later all right so I looked around a little bit more looks like there's some bolts higher up so I need to pull the Grille off to get to them so that's the center bolts for the uh the bumper but then I found these bolts here they go onto this bracket so I'm going to pull these out next loud noises whoa everything moved yeah there's some uh internal pressure built up inside of this bumper or internal forces I should say that's what we'll call it horses all right coming down foreign one piece at a time I found a bolt oh no you don't driver side headlight got a system worked out now unclip it unclip it again unsalted and then figure out what to do next in the system okay there's another clip right here passenger side gets one two there it is it's free no another one more clippage the goal here is to not break these excellence you stay there all right we're getting somewhere now found more bolts layered thank you more headlights connectors okay I found the Fastener we need we were looking for there's these ones that one that one and then one here one over there it's gonna work foreign no yes I think so okay I've got the new bumper here in the old bumper here I need to disassemble some things and transfer some parts I think I'll pull the shrouds off for the fog lamps first then I'll do the brackets and transfer them over uh little things like this plastic stuff right here that needs to get transferred over to the new bumper and then uh pull the clips out and reuse those and then I can put the new plastic cover on the new bumper we'll see about getting it fit onto the truck that's the plan I got a feeling I'm going to have an issue with these clips I didn't get any new ones the customer supplied all the parts for this job so I I fear they're going to break but uh I guess we'll cross that bridge when we get there use all this stuff I got no Hardware with these parts very unfortunate see if I can get these clips out of here see they've got that little Tang right there and that Tang will hold it into its hole so it can't uh just flap out now I've got to bend the little Tang back so this thing stays retained in the in the new air like that bend it down some good oh I screwed that up I did that one backwards what's wrong with me I don't know what this thing does but I'm putting it back bumper gravity maybe it's for like erosion control or something like that okay this one yeah you go here these have to be to keep rodents out or something that's I see no other explanation does anybody know if you know let me know I want to know so I was thinking about taking this opportunity to transfer the brackets over but I won't be able to because that bolt is kind of stuck underneath this plastic thing so I will remove the plastic this bumper first set that aside and then I'll do the brake see how this is going to work come on clip yeah that's not cool all right I'm not cutting it off I'm just trying to get a hold of the PIN so I can work it out like so it worked one down team to go why please come out I don't want to fight you okay this is becoming incredibly frustrating I've got one two three four five six seven eight like nine or ten more of these and I can't even get this first one out these things are gonna break these are like a one-time only type of clip here all right yeah I'm gonna we're gonna have to order some of these this is this is not gonna work and even if I do manage to get these out I'm gonna break half of them and we're not gonna get the result that we want out of this bumper replacement so I gotta go order these stupid Clips be right back alrighty so here's the deal on this bumper situation I had to order these clips to secure this uh plastic piece up here to the metal piece which we're replacing all of it but these clips were not going to come out without breakages they're kind of like a one-way we're a one-time use kind of deal I'm sure someone can get them apart but I just don't have those skills so I just I ordered new ones um that being said they're still not here and I'm getting really impatient with this because it's a very simple job and it needs to go away ASAP so what I'm going to do in order to make a little bit of Headway is I'm just going to go ahead and uh get these brackets off Mount them to the new bumper and I'm gonna go ahead and mount this new bumper when these flips show up I believe I can install them from the bottom with the old or with the new bumper mounted to the truck because these uh the female side pushes in from the bottom and then the male side pushes in from the bottom so I should be able to attach the plastic after the metal piece has been re-bracketed and bolted to the truck that way I can get some assembly done here and then whenever those parts show up I can just throw the rest of it back together and do that as efficiently as possible so I uh that's going to be my new plan as you guys know my plans usually don't work out and I have to adapt set planning in the middle of uh executing said plan and that's exactly what we're doing right now so let's get this stuff apart swap these brackets over and mount this new uh new bumper that's the new plan it might work it might not we'll see those were painful non-clicks now I'm aware that what I'm about to do is contradictory to what I said earlier about having to remove this to get this bolt out and it was too much of a pain but since we're not you're using this plastic thing I'm just going to take the violent shortcut method and to force my way in like I said I'm running out of patience ever so slightly normally I wouldn't like just start hacking into things but since this is trash I feel this is acceptable now if I were reusing it no I would never do something but the circumstances are going to allow it running start oh nope yep I need to recover this clip this one's coming with me come here we go okay that one went on the tab which translates to this new tab bracket goes like so I believe I missed the hole not not okay oh my tab has moved also not okay there oh no power see how a fresh battery does More Steam okay let's drag this bumper out of here and uh get that other bracket off Way Down Yonder one that I can throw it away I'd like to get this uh cumbersome component out of my workspace it's flippy flopping around and it's big and in the way and ugly I don't like it good enough foreign okay new bumper come here let's get you prepped up the Big Clip it's gonna go oh it's broken no worries no worries at all I'll just make sure I put the bolts in that one first get in there what is this thank you click okay get this guy into its new home shiny I think that's right do I have it upside down no yeah no no is that right I guess no yes yes the the survey says yes that's flat on the mount that one's black in fact I'll put a bolt in that one and then so it can't fall off put one in here too okay so I had to do a decent amount of wiggling around to get these uh brackets here to line up but to loosen these bolts again and the one on the back side did that on both sides and then I was able to get these bolts in so now I can go ahead and tighten everything down and secure the metal portion of this bumper so we get these inside ones first wrong socket Redemption foreign is secure I can re-tighten the bracket bolts on the bumper foreign oh where are they there you are I found you nice hey I saw myself not shiny ruined it so if my calculations are correct I should be able to install these fog lamps sounded weird fog lamps and then still fit the plastic piece of the bumper on if I was correct and I hope I was because if I'm doing all this and then I have to take it apart again later I will be somewhat upset with myself can't find the hole oh come on get on there click okay passenger side fog light let's get that next connect connector connected that's gonna go over and it hangs and then the bolts come in from the top yeah foreign all right let's do I think we can throw the headlights in next because we're not going to need this clear to do anything down here I think okay Grill you're up because the grill holds the headlights what am I doing uh there should be one should be a ladder back there behind the door I think I got one clip lined up let's just go ahead and seat that one right now pickage it didn't go in very well that one's broken that's in that one it's lined up that's lined up that's lined up that one beautiful wait I've done something silly the headlights have to go in first I was wrong that's okay love my job okay here let's try to do this in the uh proper order this time what do you say a good idea so we're gonna hook these hooks in to the body that's how that went okay back on track it's almost like it's impossible for me to do something without doing it twice twice must be my uh thought processes mental conditions so to speak keyword is mental click there's that other one wrench and repeat little grooves in there we go golden yeah here let's try this Grill thing again now that I figured out what I'm doing all right okay marker lamps are next tab here that slips in there and then this one locks it in excellent one more time one more time hey it looks like a truck again yeah kinda Okie dokes back to waiting for plastic pieces again but now I have the best mess and less Parts this is good oh somebody's terrible they took my box out of the garbage okey doke so here's gonna be the deal on this and I'm only recording this scene as a sort of a Justin Case those uh plastic flips that I'm waiting on all nine of them were supposed to arrive sometime today well today has come and gone and it is now going home time on a Friday if there's a chance that they're going to show up tomorrow then there's a chance that someone else is going to put that bumper back together and if this won't be here for me on Monday so uh if that comes to fruition um I will have no choice but to end this video right here and right now okay this is ridiculous sauce uh it is now Tuesday and uh last time I left this truck it was on Friday and the parts are supposed to show up on Friday because I started working on this truck on Thursday and they didn't show up on Saturday then we were off on Sunday and then Monday came and they're like I don't know they should be there pretty soon we'll call you back then they never called back and now it's Tuesday and now we got some uh jive's story about the warehouse people somewhere somebody forgot to order this stuff is what happened um just checking in I'm kind of annoyed because it's here and I needed to be gone but it's not because of stupid Clips won't show up for some reason I'm just frustrated inventing um I'll check back in with you guys later maybe in a week or so on wherever these little Clips are you guys it's a miracle look the parts are here we actually had to uh drive over to the dealership and uh talk to the parts manager in order to find them and they did not have them there and no lie a half hour later all my Clips showed back up so uh we're ready to roll now let's get this thing put back together and finished because I would like this to go away Okie dokes the way this is gonna work is these ones go in the metal section and then these ones plug into it from the bottom blocking everything in and that's what's going to do a clamp the plastic section to the metal section all right so we're looking for three little holes here to put these clips in there's one yeah that's a tight squeeze look at that there I uh shed some light on the subject here I hope that's a little bit better it's a little dark underneath of this bumper finger click another couple more yep we got one more right here and then there we go another right over here I think that's the spot yeah that's the spot go in there what are you doing is that the spot I don't know let's check this whole bumper see we got three in the middle and we got a fog lamp bracket one on each side so fog lamp bracket and one on each side that's there and where's that other one go what am I missing here yeah two holes one next to it yeah it must be this one right here sure is that one there and then the next one is the next one over which is indeed that one hero good two more on the other side and we're we're done with that section okay first bumper section I wonder how my tool is stuck on it what is that get out of here okay so there's some slots cut in this bumper all the way through and on the plastic part there are tabs that appear to fit into those slots let's get these guys lined up and clipped in and then we'll do the push pins from the bottom thank you now these go in here as long as all that stuff's lined up it looks like it I can see the hole okay there we go I can feel these past they're detent and they clip in once this little lip rides past that other clip and I can definitely agree that they don't come out they only go in one directional kind of operation numero Trace I'm good at this there's one clipped nice and the other one you're not gonna be able to see there's like fog lamps I can't even see it's like over here yeah there's that other one now you can see clickage all right oh yeah we got one more tiny clip over here in that corner put that one in this is also a new clip yeah got it okay so that's all I'm on this side got two more big ones on that side and one more little one let's get over here and get her done where's my uh pocket screwdriver okay a couple more of these bad boys more out of here there's our click that's our click of goodness oh one more one more foot where are you I got her I can't see I don't know I can't articulate myself correctly to get in there I'm just gonna send it there we go that one did the click good and we're like straight up hanging out upside down right now even the cameras upside down all right bumper is attached we win let's go take a look see what we got first things first we have an ugly fingerprinted mess let's clean it off with a glass cleaner boy I completely robbed you guys there let's just make it nice and shiny it was actually already shiny when I got it but then I touched it and got my pinky prints on everything I can see you seeing me I actually can't YouTube works one way I can't I can't actually see you might be kind of weird actually be kind of cool too giant Zoom meeting rambling Big Time rambling okay Factory fit all right guys we're good we'll go ahead and close this one out and get off the rack get it out of here as always thank you for watching my video again hope you enjoyed this video again if you did enjoy this video if you know the drill let me know about that but I just Happy Tapping that like button down below if you did not enjoy this video I'm sorry I can't even think about that I'll try harder next time so again and as always thank you for watching and most importantly don't forget to have yourselves a great day see you guys later end of transmission vehicle coming down safety you know I I honk and then still some Super Genius decides to just walk out behind the car and then he looked at me like I did something wrong I'm like this isn't a sidewalk guy what are you doing.
I’ve had three or four cars in the last week, at my shop with 299,999km. Coincidence? Or do some cars just forget how to count after almost 300000km?
Those plastic pieces in the bumper could act like baffles in a muffler or a suppressor to limit sound maybe … I’m stoned 😶🌫️
My internal forces are forcing me internally to hit that like button
NOOOOOOOO!…..Keep the cardboard!!!
Love your videos Ray! I watch every day, I wish I had the confidence you have to do work on my own car!
I do the basics… oil change, brakes, tire rotation etc… but you got me thinking I can. Been a subscriber when you had less than 50k. Please drop this a like!
Happy 4th of July Ray.
learned something new, being 76 it good to learn new stuff. You can use electrical tape for a bandage in your fingie's. Thanks Ray
i have an 06 ford 500 awd getting p1889 replaced oil coupler temp/pressure switch fluid filter on rear diff haldex unit abs module replaced programmed im almost 1500 into this 2500 dollar car for my kid ugh i cant find a place to diagnsose it its a volvo rear diff on a ford im told by garages we only work on american cars(its a ford i said)dont matter they said called foreign car garages they dont work on domestics(i said its a ford with volvo diff)they said dont matter i called ford the service dept at local dealer told me we only have 1 guy for trucks i said trucks?he said i told him its an f550 i said sir its a sedan awd he proceeded to tell me ford didnt make ford 500 and used expletives and hung up on me im at a loss traction light is on cant get to go off im a nurse help people daily have worked through this covid with covid patients no time off nothing i just want this fixed for my kid lol sorry im ranting no one seems to give a shit its all about money i just want god to throw a little luck in my direction for a change lol sorry i took up anyones time
Name those pliers
Angry Pliers little brother's name could be
'Pernicious Pliers'
Only mechanic I've ever seen roll around on a creeper working on a car that's on a lift.
Tape Band-Aid! lol
ray forget waiting for clips. use 1/4 X20 bolts with washers
ford kept putting motorcraft blower motor in ford tempo the blowers kept dying after 40 to 60 days within the 90 day warranty got tired and bought a BOCH blower motor it came with 3 year warranty it never failed
So Someone at the Dealership DROPPED the BALL and delayed the job an extra 3 days.
I do not think you would like to see the people that see you because you might would end up seeing someone watching your videos while sitting on the toilet.
When you receive cars with the same even numbered mileage it's because you are in a multiverse Ray, the other Bizarro Ray is experiencing cars with odd numbers.
Click.
Did you check the lights all work Ray ?
I use just the cheapest spray to lube them up and Matco tool like a UPR4M or a CL010 upholstery tool and most all comes out and you can refuse them.
Your head was in holiday mode as you stated that you were going to upload videos while up in the woods/cabin un an earlier video.
As usual, another great humorous video. Ray can you please tell me what is the brand and part number of that very long trim tool that you attack everything with.? Many thanks from Australia 🇦🇺
like how those marker light wires just appear in the right place
Yet another "mechanic" who would rather destroy something than get the correct tool.
Those two plastic bits you asked about seem to be to assist airflow through the radiator so it doesn't deflect sideways away from it.
It is interesting that your shop allows people to bring in their own purchased parts for you to install. Up here in NH a person would be hard pressed to find any shop that would do this. They all claim that they do not want people coming back to them complaining about the parts that were installed. It could be that they also want to add a slight markup to the parts they purchase for their customers. But mainly it is because the parts the shops get from their suppliers are warrantied incase there is a problem with them and get quick replacements.
Parts?….not in Murica🙄
Wow for such a heavy duty looking vehicle, why such a light waight flimsy bumper.
Cost cutting to the bone, safety not even on the horizon Dodge.
Ray you are the man, those plastic clips are a nightmare 👍
That is one of the worst things, no communication between departments, and instead of fixing the problem they blame someone else, or supplier, all the best to you and your loved ones
Good evening Raymond,👋 how's the vacation going🤷 BROTHER?!👍👋
Those bumper brackets lessen drag and wind buffeting noise or whistles.
Push rivets are pretty cheap. Could have some on hand.
Enjoyed the video!!
We enjoy all your videos thanks
Hey Ray I've been enjoying your videos, thanks a lot. What's your opinion on changing transmission oil after 100k miles if it hasn't been done before?
mechanic getting annoyed by a job that should have been at the body shop (for potentially cheaper). Imagine that….. 😀
I believe that plastic thing is called the skirt, skirt skirt!.
I've had to replace my front end three times, 05 Silverado. Fucking deer. Death to Bambi.
I have a short story for y’all. I had a 2017 Dodge Ram 1500. Going down the road, one day. Some guy in a older model, probably 80s model, Ford F-150, rear ended me. At about 60 mph. No scratch or dent, on either my rear bumper, or his front bumper. This guy got hit in a parking lot. Driving a Chevrolet. One more reason I prefer a Dodge
What's the labor rate to save 25 cent clips?
I like tape better than bandages also. Great vids, Have a happy 4th Ray
I thought I heard you talking to Peter in this video. As a frequent watcher I've not seen Peter in your videos recently. There's been some scuttlebutt that he no longer worked at your company. Just was hoping we'd see more Peter. I did not mean it that way . Peter seems like a good friend and coworker.
WOW very interesting super kool ,1st class great info.,, AAAAAAAAAAA++++++++++++ again great video I liked it a lot ,keep up the great work.
I know and you know that we all don't know what those things are for, they are just there. Those things being the couple of plastic plates that serve no obvious purpose…..
Again Ray your brilliant in doing a top notch job, a standout engineer among many. Not saying your the only great one but there are those that aren't as diligent as you and many others. For those out there like Ray I salute you all, thankyou for caring so much and being so damned good.
Big hugs to you and family Ray, keep yourselves safe and well
If they got the parts, why didn't they install them? It isn't like they need to diagnose and rebuild or repair a major problem.
You and Scotty…You my boys!!!
Good job Ray, I have had to do that with a few vehicles over the past few months, also had to reclip door panels for someone's 2008 Chevrolet Cobalt. I understand the frustration 😂😂. 👍
Kind of looks like the dealer burned you more than the customer-supplied aspect. A shop near me does not supply WIX filters, for whatever reason. I, along with plenty of other customers, have been supplying them for our own vehicles as a result, and this has gone on for at least a decade, probably longer. I would be surprised if they have ever been burned by the practice. They certainly haven't been in working with me, and I doubt they would still gladly accept them for use if there had been significant problems. I'm sure it depends on what, exactly, a customer is supplying and from what source / on what basis.
Hollywood Rabotnik 🙂
Did say poo tang
You love your job you do it twice.
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
a little bit of penetrating oil helps a lot with stuck connectors and plastic pushpins
The very end of the video resonated with me. I work in a warehouse that has narrow aisle, high rack storage. I drive a turret truck. Google for a description. The vehicle is about 12 Ft Long and has a mast that is 15 Ft tall when retracted. It can extend to 35 Ft. You know what a car battery weighs. The battery on this vehicle is the size of a full pallet of car batteries. The vehicle weighs around 10,000 lbs. I'll be driving through a common area and people will walk out in front of me. Sometimes so close I have to crash stop the machine. It goes through my mind" What the hell are you doing? Would you cross the street in front of a 5 Ton truck ? ". I think the movie "Idiocracy" is coming true.
After 25 years of turning wrenches, parts hunting is one part of the job I will not miss!
Do you change light bulbs by taking the whole assembly out, I only ask cause it seem easier that way
Everybody needs a little tang
Send it! Zip ties, nice
Reverse order!
Ray you may not want to see some of us watching you as some may not be wearing pants at the time.
Boring
Seemed a grumpy Ray at the beginning, a much happier Ray at the end. I approve of the happy Ray. Great video. And showing the parts BS. Everywhere.you.go. the same BS
Watching Ray cut the old bumper…all I could think was…please don't let the new bumper be the wrong size.
Ray, my knees are aching watching you work on the ground. Keep up the good work.
Like the sound effects when you whip out the can of fluorocarbons!
Hello Ray , i am surprized you know where to put all these bumper parts back like they should be. Scott from Vehcor is great with this proces. He is the guy rebuilding damaged cars. His comments while working are entertaining like yours. Have a great day ! Greetz John.
You should take all those exact mileage numbers and play the lottery with them. Would be a hoot if you won with them.
You got it covered 🙂👍
Add a comment…
Ya know, business is business. Would it not be more efficient to take this to a body shop? Unless you’re in the mood for variety.
Either way, thanks for showing us some variety!
Ray's Auto body services Inc
Use wd40 on them plastic pieces that hold the plastic bottom on
New floor……doo dee doo……..click!
You should have a video with nothing but how to remove various clips, connectors, etc.
Ray does it nice because he does it twice
trim clip pliers
This is why vehicle manufactures need to go back to using nuts and bolts. Everyone knows that plastic degrades over time. One thing you will learn with attaching body parts is to leave everything lose until you are able to line everything up.
I've noticed a lot of black surgical sterile electric tape on Rays fingers lately?Where you buy that product Ray?
Those clips are designed for one time use. Looks shiny with the new bumper!
Ray, love your vids, but have to say much respect on the electrical tape bandage…..Works every time brother. So funny, I was just discussing this with a fellow worker .
I don’t know how to break it to you but the customer is always right.
YEAH! brake clean☺
I know the purpose of this video was to repair the fender, but i was wondering if replacing the headlamp globes would have required some disassembly to get to them?
Did Rainman stop answering the shop phone or did I not hear.
Replaced the metal bumper on my 2007 Silverado, don't remember having any of the trouble your having, but I've been in industrial maintenance for 42 plus years with anto body and mechanic DIY for that long or longer. Great job.
Scotty says check the dumpster at the dealership.
When I worked as a body man, we had a tool that would pinch the bottom and pull the pin up about 1/4 inch,.then the bottom section would push the bottom out of the hole. I could remove 12 fasters in about 10 minutes
The customer should have been advised before repair that he needs to order clip package for the bumper assembly, or whatever is being replaced on the vehicle.
Hi Ray, you are so thorough I would only wish my mechanic was just like you
I used to work for a company that are that grill.
The idiot who walk behind you probably was talking on his phone. Happens to me constantly in grocery store parking lots.
Factory fit…alright…you're good and we know it..
.
Them clips are a pain. I find if you spray them with a lubricant they come out easier.
Go buy a lotto ticket. Ur lucky week!!
Darn Ray… YOu're not just a mechanic – you're a body shop guy too!! You go. : )
Also, more Count counting! Went through sesame street myself many moons ago.Ah Ah Ah
you forgot to plug in the second set of lights m8
Ray is on "Vacay".. and still sends us vids to keep us 'sated. Stop sending vids from the outhouse Ray…lol
Ray, I noticed all the nice Florida cars. Do you ever run into rusted out junk from up north that the snow birds drive in? I try to buy all my cars from NC or south. I live in the DC area.
Your service manager is a jackass for taking on this job. Thats a body shop job.