In this video come along as I look into the 4x4 system on this 1998 Chevy S-10. It is making a bunch of noise and we need to figured out what it needs so we can get some parts ordered for part 2...
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair

49 thoughts on “Chevy s-10 no 4×4 / noisy 4×4”
  1. Avataaar/Circle Created with python_avatars john mattingly says:

    I'm here I'm in 2022

  2. Avataaar/Circle Created with python_avatars Marshall115 says:

    after camera hearing i would have drained transfer case oil and front pumpkin.I also had a 83 and 98 s10 4×4-both transfer cases did that when i stomped on throttle.Probably means blazer/jimmy's have that prob.

  3. Avataaar/Circle Created with python_avatars Michael Raddish says:

    Chain problem

  4. Avataaar/Circle Created with python_avatars Martin Prehjan says:

    The issue is inside the NP transfer case! …not that all the linkages were not problematic either to begin with!
    If I had to guess I would say transfer case chain or sprockets are enlarged! front axles are probably gone too! hubs and differential too!!! It probably hasn't had any gear oil changes in either of its three cases!
    All of which translates into folks not keeping up with their service intervals and chart times! Usually due to crooked mechanics that scare the shit out of them, and turn the owners into ostriges! You know head in the sand if I don't see it then it doesn't exist type thing!

  5. Avataaar/Circle Created with python_avatars Adalid Marcial says:

    Who's here in 2022?

  6. Avataaar/Circle Created with python_avatars James Dvorak says:

    This was fun!

  7. Avataaar/Circle Created with python_avatars Lucky 907 says:

    Did you ever put a new transfer case in? Or take apart the one that was in it? Think Im having the same problem

  8. Avataaar/Circle Created with python_avatars Lee Fisher says:

    Sir I would love to see this video I'm having the same trouble out of my Chevy S10 Blazer it would be great help to me thank you sir

  9. Avataaar/Circle Created with python_avatars Jathan Price says:

    Nice video Eric 👍🏾

  10. Avataaar/Circle Created with python_avatars Jamie Saunder says:

    Man I like the way u do your process of elimination . Man your great mechanic

  11. Avataaar/Circle Created with python_avatars Jesse Lackey says:

    Transfer case shift motor sounds like a beaaast

  12. Avataaar/Circle Created with python_avatars Dean Farmer says:

    In the video you said that the truck is a 2003, but in the description you said its a 1998

  13. Avataaar/Circle Created with python_avatars Gregory Thomas says:

    Sadly I can't find the next part to this…was really looking forward to seeing the conclusion 🙂

  14. Avataaar/Circle Created with python_avatars Cecilio Colon says:

    Why didn’t you clean it with a whise wheel

  15. Avataaar/Circle Created with python_avatars David Blair says:

    You have all the essential tools msm!!

  16. Avataaar/Circle Created with python_avatars Movie Time! says:

    Transfer case more likely.

  17. Avataaar/Circle Created with python_avatars Adam Moore says:

    Transfer cases and fuel pump/lines are 2 of the gremlins on these little guys. Also, intake manifold gaskets

  18. Avataaar/Circle Created with python_avatars Tickled Funny Bone says:

    Is there a part 2?

  19. Avataaar/Circle Created with python_avatars Good_Things_To_Know says:

    Where is part two?

  20. Avataaar/Circle Created with python_avatars mike hrdlicka says:

    Had one worn chain. Would jump under acceleration in 4×4. $50 transfer case

  21. Avataaar/Circle Created with python_avatars Rodolfo Franco says:

    2002 sl extended cab 4 door mine did the Same thing problem was rear end was shot to hell some one that installed the locker's didn't doo it right had to get a hole new rear end it's oct/3rd /21
    800.00. All just because of someone's laziness I got it in that condition 4,500 later 😂 still love this truck very rare to find them in Northern California see how long it takes for somebody to steal the damn thing Oroville California home of the 4×4 tweakers

  22. Avataaar/Circle Created with python_avatars Mike Robbins says:

    Good job Eric O.

  23. Avataaar/Circle Created with python_avatars sflotr says:

    Man with all that rust around constantly, you must keep your tetanus current. Wow!!!

  24. Avataaar/Circle Created with python_avatars Timpala says:

    Was there ever a part 2? I can't find it and WHAT'S IN THE BOX?!

  25. Avataaar/Circle Created with python_avatars Jay DeGelder says:

    Just saying…. you should always disconnect the battery negative first….. then the positive, no shocks .when you reconnect pos. first then the neg. again .. just saying.

  26. Avataaar/Circle Created with python_avatars Alexander Stefanxandra Swedish says:

    great

  27. Avataaar/Circle Created with python_avatars 3wkidd says:

    can you get me a magnet for a compressor for my nissan altima

  28. Avataaar/Circle Created with python_avatars Jim Goad says:

    Been looking for part 2 on the S10 transfer case can't seem to find part 2 wondering did the man ever let you fix the truck?

  29. Avataaar/Circle Created with python_avatars Jim Goad says:

    Smart man very smart. like the old Universal stethoscope

  30. Avataaar/Circle Created with python_avatars unclehoglegable says:

    2021 🙌

  31. Avataaar/Circle Created with python_avatars Rebel Woods says:

    It's working

  32. Avataaar/Circle Created with python_avatars Rebel Woods says:

    Sounds like u joint poping

  33. Avataaar/Circle Created with python_avatars Jeffrey Battousai Strader says:

    Where's Part 2??????

  34. Avataaar/Circle Created with python_avatars jan dostal says:

    Wish you Americans would use metric sooooo much easier

  35. Avataaar/Circle Created with python_avatars jan dostal says:

    I'm ½ way in. I'm thinking with all that rust in the actuator housing I would be checking the switch if it moves freely and isn't fouling movement. I'll keep watching. Good work Eric 👍😉

  36. Avataaar/Circle Created with python_avatars Robert Openheimer says:

    What happened to this 2003 Chevy S10? You were going to order parts are you still waiting for NAPA to deliver them?

  37. Avataaar/Circle Created with python_avatars The One says:

    Computer dots = pixels.

  38. Avataaar/Circle Created with python_avatars Will says:

    Excellent video! Well explained, now I'm going to trouble shoot my 03 Sonoma ZR2 that it won't engage. Thanks!!!

  39. Avataaar/Circle Created with python_avatars CJ says:

    For a human, sir, you're a good one.

  40. Avataaar/Circle Created with python_avatars frankthespank says:

    Seriously… why bother fixing cars/trucks like this?! With that much of it rotted away with rust, it’s got how many years left, 2 or 3? …..WHY?!

  41. Avataaar/Circle Created with python_avatars Ricky Hubbard says:

    I'm here in 2021. Great information bro.

  42. Avataaar/Circle Created with python_avatars Kathleen Kelly-Simpson says:

    I take it the guy never brought this truck back?

  43. Avataaar/Circle Created with python_avatars Mechanically Creative says:

    Why can't I pull it by hand? Important question for South Main Auto and religious folks everywhere.

  44. Avataaar/Circle Created with python_avatars Rod Belding says:

    I love the old S-10s, I have a 99 thats still going and has never really had any major issues. Mine is the 2wd 2.2 though.

  45. Avataaar/Circle Created with python_avatars rranger1014 says:

    I notice a couple unique features of the '03 S10 is that it comes equipped with both left hand gear shift lever and left hand ignition!

  46. Avataaar/Circle Created with python_avatars CR Auto guy says:

    That noise is the front diff transfer case or you've got a cv way out a floppy flop I'm sure you already figured that out

  47. Avataaar/Circle Created with python_avatars Shane Cheatham says:

    Part 2?

  48. Avataaar/Circle Created with python_avatars hi babe says:

    The S10 was crap from the factory .

  49. Avataaar/Circle Created with python_avatars Billy Nunya says:

    Im going with checking the vacuum switch on top of the transfer case

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.